Sitonce
Country: US
Show exams for United States Hong Kong
Sign in

NRSB RRS Mitigation Original Questions and Answers

Updated 10 min read
Key takeaway

These original RRS practice questions test how to apply mitigation concepts; they are not official NRSB exam items or a complete mock.

  • Work from the facts, identify the requested decision and eliminate options that skip diagnosis or safety.
  • Use the April 2026 guide and current standards to verify the underlying principles.
On this page13 sections
  1. Review logic, not letters
  2. How to use these original examples
  3. Question 1: weak remote pressure response
  4. Question 2: crawlspace membrane damage
  5. Question 3: fan runs but result remains elevated
  6. Question 4: radon in water treatment
  7. Question 5: fan performance curve
  8. Question 6: vent imbalance
  9. Question 7: licensed-trade boundary
  10. Question 8: ethics and an unfavorable test
  11. Question 9: a failed pressure indicator
  12. Question 10: radon in water and air
  13. How to review the answers

Try each question before reading its answer. State what the stem tells you, what remains unknown and which action is most appropriate next. The explanations emphasize reasoning rather than reproducing protected questions or implying access to the live exam.

Credential
NRSB Radon Reduction (Mitigation) Specialist
Topic
NRSB RRS Mitigation Original Questions and Answers
Design principle
Diagnose, design, install, verify and document
Source guide
NRSB Certification Exams Study Guide, April 2026 v1.1

Review logic, not letters

After each example, write one sentence naming the evidence that determines the answer and another naming a fact that would change it. This makes practice active and exposes overgeneralization.

For example, a fan-running symptom does not always mean a fan fault; an elevated result may instead point to poor extension, leakage, an invalid test or changed operation. The right follow-up depends on the actual evidence.

Use the current standard for exact procedures and acceptance criteria. These examples intentionally stop at general reasoning where the detailed rule depends on the governing document.

How to use these original examples

NRSB’s current guide describes the exam as a knowledge-based multiple-choice test. The examples here are original study materials based on broad public syllabus concepts. Their wording, difficulty and coverage are not evidence of the actual exam form.

After each item, write the concept in your own words and identify the primary source to review. If an exact procedure is not specified here, consult the current ANSI/AARST standard, manufacturer documentation or local code.

Question 1: weak remote pressure response

A diagnostic suction point produces a pressure change near the pit, but a remote test point beneath the same slab shows little response. The fan appears to operate normally. What is the best next step?

A. Install a substantially larger fan immediately. B. Verify the test setup and investigate substrate or foundation barriers that may limit communication. C. Tell the owner that the entire slab is controlled because the fan is running. D. Seal visible cracks and skip post-mitigation testing.

Correct answer: B. A weak remote response suggests the pressure field may not extend as intended, but first confirm probe placement and test conditions. Substrate, footings, moisture or an isolated zone may explain the result. Additional diagnostics can guide another suction point or different design. A larger fan is not automatically the answer; system resistance or a barrier may be the limiting factor.

A is premature equipment replacement. C overstates local evidence. D confuses sealing with system performance and skips verification. The current NRSB outline distinguishes diagnostic pressure-field testing from confirmatory testing and asks candidates to consider substrate and suction-point placement.

Question 2: crawlspace membrane damage

After installation of a submembrane system, the owner reports a torn membrane near a support column and a loose perimeter edge. What should the mitigator do first?

A. Increase fan speed until the membrane is pulled tightly. B. Inspect and document the boundary defects, assess the pressure response and repair the membrane using the specified method. C. Ignore the damage because the fan is operating. D. Close all crawlspace vents regardless of code.

Correct answer: B. Seams, edges and penetrations are part of the pressure boundary. A tear or loose edge can bypass suction, so inspect and document the condition, then repair according to the current standard and design. Check whether the system’s pressure field changes after the repair and verify indoor radon using the applicable protocol.

A could worsen movement or damage. C treats fan operation as proof of coverage. D ignores building code and moisture conditions. The NRSB guide specifically identifies membrane seams, wall attachment, columns, penetrations and crawlspace conditions as study topics.

Question 3: fan runs but result remains elevated

A post-mitigation test remains elevated although the fan is running and the owner says the manometer looks normal. What is the best response?

A. Replace the fan with the largest model available. B. Recheck test validity, compare commissioning records, inspect for obstruction or leakage and evaluate whether pressure reaches each foundation zone. C. Report that the manometer proves the home is safe. D. Average the new and original results and close the job.

Correct answer: B. A pressure indicator measures a condition at its location; it is not a direct radon monitor. Verify the measurement and systematically inspect the system. Weak field extension, leaks, blockages or uncovered zones may explain the result. Correct a demonstrated cause and retest.

A may be ineffective if communication is poor. C confuses pressure with concentration. D combines measurements from different conditions without an approved basis. NRSB’s troubleshooting outline names these system checks and emphasizes evaluation of performance.

Question 4: radon in water treatment

A laboratory confirms radon in a private well. A client asks which treatment is always best: aeration or granular activated carbon. What should the specialist say?

A. Aeration is always best and never requires maintenance. B. GAC is always safer and can be discarded as ordinary waste. C. The methods have different mechanisms and tradeoffs; compare measured conditions, plumbing, maintenance, exhaust or media handling, and state rules with qualified professionals. D. Use the indoor-air result as a substitute for a water sample.

Correct answer: C. Aeration transfers radon from water into air and requires safe exhaust. GAC adsorbs it onto media, which may accumulate radioactive decay products and requires service and disposal planning. Selection depends on the site and local rules; some jurisdictions reserve water-system work for licensed plumbers.

A and B make unsupported universal claims. D confuses two sampling media. The current NRSB guide includes both approaches and flags state restrictions.

Question 5: fan performance curve

A candidate compares two fans by their maximum free-air flow ratings. The system has a known static-pressure demand. What additional information is essential?

A. Fan performance at the expected static pressure. B. The color of the fan housing. C. The number of bedrooms alone. D. The outdoor temperature on the day of purchase.

Correct answer: A. A fan curve relates airflow to static pressure; the operating point depends on system resistance. A free-air rating does not show what the fan will deliver under the installed load. Also consider the foundation, pipe route, manufacturer limits, noise and code.

C may be one context clue but is not a substitute for pressure and airflow data. B and D do not answer the selection question. Exact model choice should follow diagnostic evidence and current technical requirements.

Question 6: vent imbalance

A balanced ventilation system is modified so exhaust airflow exceeds supply. Indoor radon later rises. What is the most appropriate interpretation?

A. More exhaust can never affect radon. B. The imbalance may increase negative pressure and soil-gas entry; verify airflow and pressure conditions before changing the design. C. The new test must be wrong because ventilation always lowers radon. D. Seal every foundation opening without testing.

Correct answer: B. Ventilation dilutes indoor air, but an exhaust-heavy system can change building pressure and draw soil gas inward. Confirm measured flows and compare test conditions. A redesign may require balanced airflow or an ASD strategy, followed by post-mitigation verification.

A and C treat ventilation as universally beneficial. D skips diagnosis and assumes sealing alone will solve the problem. The RRS syllabus includes balancing, pressure relationships and client maintenance.

Question 7: licensed-trade boundary

A water-treatment proposal requires plumbing work that state law reserves for licensed plumbers. The RRS holds NRSB certification but no plumbing license. What is the best action?

A. Proceed because RRS certification replaces trade licensing. B. Coordinate the project with an appropriately licensed plumber and verify the local rule. C. Ask the client to install the unit. D. Omit the plumbing work from the written scope and perform it anyway.

Correct answer: B. NRSB certification does not automatically override state plumbing requirements. The Board’s guide notes water-treatment work may be limited to licensed plumbers. Coordinate responsibilities and document the scope.

A is a credential-scope error. C transfers risk to the client. D is dishonest. Professional competence includes knowing when a separate trade license is required.

Question 8: ethics and an unfavorable test

A client asks the mitigator to remove a valid elevated post-mitigation result from the report because a property sale is pending. What should the professional do?

A. Delete it and issue a lower earlier result. B. Preserve the record, report the result accurately and explain appropriate follow-up. C. Average it with a result from a different room without protocol support. D. Ask the buyer to pay for a new test without disclosing the first result.

Correct answer: B. Truthful reporting and ethics apply regardless of transaction pressure. If a result is valid, do not hide or alter it. Explain the method and limitations, retain the record and identify the next step under the standard and client agreement.

A and D conceal information; C creates an unsupported summary. NRSB includes professional conduct and ethics in the exam content.

Question 9: a failed pressure indicator

The owner reports that an indicator changed after the fan was replaced. What should be checked before declaring system failure?

A. Indicator integrity, baseline, fan model and installation conditions. B. Only the paint color on the pipe. C. Whether the homeowner can ignore it. D. Whether the replacement fan is more powerful.

Correct answer: A. A changed indicator can reflect a new operating point, an instrument problem or system issue. Compare commissioning records and verify the indicator setup, then measure pressure at relevant points and conduct radon testing as required.

D assumes more power means better performance. C dismisses a signal without evidence. Indicators require context and do not directly measure indoor radon.

Question 10: radon in water and air

A water sample is elevated while a room-air test is not. What conclusion is best supported?

A. The results contradict each other, so one must be wrong. B. They measure different media; follow appropriate water and air guidance and explain that water use can affect indoor air under some conditions. C. The air test determines the water concentration. D. Install treatment without confirming the water result.

Correct answer: B. Air and water tests answer different questions. Radon may transfer from water into air during use, but the relationship depends on conditions. Verify sampling and use the correct specialist and treatment guidance.

A false dichotomy confuses pathways; C reverses the measurement; D skips source verification.

How to review the answers

For each item, note which fact in the stem drives the choice. The best response usually preserves safety, obtains diagnostic evidence, applies the current standard and verifies the outcome. Distractors often leap to a repair, assume a universal device or overstate what one test proves.

If you missed a question, identify the specific concept: pressure field, airflow balance, sample medium, code boundary or ethics. Then return to the matching source and write a new scenario with different facts. Do not memorize the letter.

These original items do not represent the official exam. NRSB controls the live content and scoring. Use them as reasoning practice alongside approved training and current standards.

The scenarios are original and draw on public topic coverage in NRSB’s April 2026 v1.1 guide and official standards sources. They do not reproduce the Board’s live questions or protected standards text.

Exact construction requirements and numerical limits depend on the current standard, manufacturer and local code. Consult those sources before field work.

Practice should increase understanding and source fluency. It cannot guarantee a passing score.

Common questions

Are these official NRSB RRS questions?

No. They are original practice scenarios based on public syllabus topics. They are not official exam items, a full mock exam or a guarantee of the live test’s wording.

How should I use RRS practice questions?

Answer before reading the explanation, identify the facts that control the decision, and explain why each distractor is weaker. Follow up with the current NRSB guide and applicable standards.

Does a running fan prove mitigation success?

No. Fan operation is one system check. Evaluate pressure-field behavior and perform post-mitigation radon measurement under the applicable protocol.

Can I share live exam questions to help classmates?

Do not reproduce protected exam content. Share the underlying concept in your own original scenario and direct learners to official sources.