NRSB RRS Mitigation Syllabus and Official Outline
The April 2026 v1.1 NRSB guide lists seven RRS syllabus areas: source and behavior, mitigation theory and design, dilution ventilation, ASD installation, crawlspaces, troubleshooting and radon in water.
- The published weights total 100%, but the outline guides preparation and course design; it does not guarantee the exact content mix on every future exam form.
On this page16 sections
- Keep the outline current
- A domain-by-domain self-check
- How exam domains differ from syllabus weights
- Use the current version
- Seven areas and their published weights
- Source and behavior fundamentals
- Mitigation theory and design
- Dilution ventilation
- ASD installation process
- Crawlspace considerations
- Troubleshooting and performance
- Radon in water
- Professional judgment runs through the outline
- Turn the outline into a study checklist
- Use current sources
- Syllabus study takeaway
The current primary source for this article is NRSB Certification Exams Study Guide, April 2026 v1.1. It describes the RRS examination, certification requirements, subject areas, syllabus and source list. Earlier versions may differ. Use the version linked from NRSB’s current exam materials and check the live page before test day.
- Credential
- NRSB Radon Reduction (Mitigation) Specialist
- Topic
- NRSB RRS Mitigation Syllabus and Official Outline
- Design principle
- Diagnose, design, install, verify and document
- Source guide
- NRSB Certification Exams Study Guide, April 2026 v1.1
Keep the outline current
A syllabus is a dated document. If NRSB releases a newer guide, compare the RRS section and update your checklist. A new version could reorganize domains or change references without changing every underlying principle.
For professional work, standards may change on a separate schedule from the study guide. Maintain a separate list of current technical standards and local requirements for each building type you serve.
This version discipline prevents two common errors: studying an obsolete procedure as current and attributing a local code requirement to NRSB. Record which source controls each claim.
A domain-by-domain self-check
For source behavior, can you identify a plausible pathway without claiming proof from a crack? For design, can you compare ASD, ventilation and other strategies? For installation, can you explain what the pressure test and fan curve each establish? These questions test more than recall.
For crawlspaces, can you distinguish exposed soil, membrane and rat slab conditions? For troubleshooting, can you separate fan failure from weak pressure extension? For water, can you explain sample handling, aeration, GAC and plumber boundaries? A confident answer should identify a source for exact requirements.
Mark a domain ready only when you can apply it to an unfamiliar scenario and explain the limitation. That threshold is more useful than simply reading the chapter once.
How exam domains differ from syllabus weights
The syllabus weights describe broad content emphasis, while exam subject areas describe work tasks such as problem evaluation, diagnosis, strategy selection, implementation, system evaluation and ethics. The same question may contribute to several subject categories. This is why the published category counts can exceed the total exam length.
Use weights to decide where you need depth, but use the subject categories to think about how you perform the work. A candidate may know ASD theory yet still struggle to evaluate whether a pressure test is valid or explain a system’s limitations to a client.
Mixed-domain study reflects real projects. Work through a case from initial measurement to post-mitigation report and identify which syllabus areas appear at each stage.
Use the current version
The guide says the syllabus is a guideline for course providers and summarizes the areas covered. It is not a copy of the live examination or a promise about exact wording. Treat it as a map for systematic preparation, not a form prediction.
Confirm that a source refers to Radon Reduction (Mitigation) Specialist. NRSB’s RMS and RMT credentials have different scopes and syllabi. Similar acronyms across certification bodies can also refer to unrelated credentials.
Seven areas and their published weights
The guide lists Radon Source and Behavior Fundamentals at 20%, Mitigation Theory and Design at 10%, Dilution by Ventilation Systems at 5%, ASD Installation Process at 30%, Crawlspace Considerations at 10%, Troubleshooting Non- or Underperforming Systems at 10%, and Mitigation Systems for Radon from Water at 5%. The figures guide study emphasis.
The weights total 100%, but should not be treated as a guaranteed distribution on every future form. NRSB separately describes six exam subject areas whose counts overlap because some items cover more than one subject. The two outlines describe content from different perspectives.
Use the largest area as a reason to protect study time for ASD installation, not to skip the smaller domains. Water treatment has distinct sampling, maintenance and licensing issues even with a lower percentage. A short topic can still appear in an applied scenario.
Source and behavior fundamentals
This area covers where radon comes from, how it moves and what building conditions can draw soil gas inward. Candidates should understand source, pathway and pressure as distinct parts of the problem. Radon in soil, foundation openings, building pressure and ventilation interact rather than operate as independent checklist items.
Map a building before selecting a system. Note slabs, crawlspaces, basements, sumps, drains, block walls and additions. Label observations separately from hypotheses. A visible crack may be a route, but it does not prove that it caused the measured concentration.
Weather, HVAC, exhaust fans, occupancy and foundation differences can change conditions. Study how to use those facts in a scenario without inventing a universal correction or assuming that one test characterizes every room and season.
Mitigation theory and design
Theory and design asks candidates to compare intervention strategies, including ASD, soil pressurization, ventilation and sealing. The choice depends on the identified source, building, pressure conditions, substrate and available diagnostic evidence.
NRSB cautions that sealing alone usually does not work by itself. Sealing can support a pressure-control design, but it is not a substitute for evaluating the soil-gas pathway. Practice explaining what each approach changes and what its limitations are.
A complex foundation may need more than one strategy or suction zone. Test pressure-field extension, identify barriers and consider how zones communicate. Choose a design because the evidence supports it, not because the system is familiar.
Dilution ventilation
The ventilation area includes HRVs, ERVs, airflow calculations, duct sealing and location, balancing, maintenance and communication. Ventilation lowers concentration by changing air exchange but can alter building pressure and energy use.
Know that an HRV transfers heat and an ERV transfers heat and some moisture, depending on design. Neither is automatically the best solution. Actual performance depends on airflow, balance, climate, duct arrangement, controls and maintenance.
Compare dilution with soil-gas control. A system that exchanges air may help in a suitable design, while an unbalanced exhaust can increase negative pressure at the foundation. Commission and verify the outcome rather than relying on equipment labels.
ASD installation process
The current outline’s largest weight is ASD installation. It names building investigation, negative-pressure sources, sealing, pre-mitigation testing, exit-point selection, pressure-field extension, pit excavation, substrate porosity, suction-point selection, manometers, block-wall communication, water management, fan curves, backdrafts and electrical work.
Study what each step answers. A diagnostic vacuum test can show potential communication; confirmatory testing with a fully excavated pit and a radon fan provides different evidence. A fan curve relates airflow to static pressure. Multiple points may need balancing.
Safety and code remain part of implementation. The study guide says to follow local code for electrical connections and flags GFCI protection. Use current standards, manufacturer directions and qualified trades for exact requirements.
Crawlspace considerations
The crawlspace section asks candidates to account for ventilation status, existing membranes or rat slabs and insulation above the space. It includes membrane seams, attachment to foundation walls, column and pipe penetrations, health and safety, and when closed-cell foam may be relevant.
A membrane must have durable seams and perimeter details if it is to form a useful pressure boundary. A tear or open edge can bypass suction. A rat slab and exposed soil are different surfaces and should be evaluated under the applicable method.
Crawlspaces often contain moisture, electrical hazards, low clearance and mechanical equipment. Assess safe access first. If structural or water problems fall outside the radon scope, involve an appropriate specialist.
Troubleshooting and performance
The troubleshooting section asks whether a system is nonfunctioning or simply underperforming. Check electrical supply, fan operation, blocked or water-filled pipe, leaks, loose joints, pit adequacy and whether pressure reaches all foundation zones.
An indicator or manometer provides evidence about pressure at a particular point. It is not a direct radon monitor. A running fan therefore does not prove that indoor concentration is controlled; post-mitigation testing remains important.
Use a sequence: confirm complaint and baseline, inspect safely, measure system behavior, identify a cause, correct it and verify. A bigger fan is not the first answer to every elevated result.
Radon in water
NRSB includes aeration and granular activated carbon. Aeration transfers radon from water into air and requires safe exhaust. GAC adsorbs radon onto media and requires service and appropriate handling or disposal.
A water test and an indoor-air test measure different media. A water result alone does not determine indoor concentration; household use, ventilation and other conditions affect transfer. Use a laboratory collection method designed to minimize radon loss.
Water mitigation may be limited by state law to licensed plumbers. Check the jurisdiction before offering the service. System choice should account for measured water conditions, plumbing, maintenance and worker safety.
Professional judgment runs through the outline
Although ethics is a separate exam subject area, it affects every domain. Protect client data, report test limits honestly, disclose conflicts and avoid guaranteed outcomes. Refer medical, electrical, plumbing or structural questions to qualified authorities.
A scenario may cross multiple domains: a crawlspace installation can involve diagnosis, strategy, implementation and worker safety. Mixed practice reflects the way professional decisions occur.
Do not study each percentage as an isolated unit and then stop. Link measurement evidence to design, installation, commissioning, reporting and follow-up.
Turn the outline into a study checklist
Create seven rows using the official areas. For each, ask whether you can define core terms, find the current source, apply the idea to a scenario and explain one limitation. Add a practice item and note where your answer came from.
Let the weights guide time but use your baseline to determine extra review. If ASD is familiar from work, maintain it while closing a weak water or ventilation area. If you are new to installation, book supervised practice rather than relying only on reading.
The goal is not to memorize every line of the outline. It is to understand how the concepts govern a mitigation decision and where to find exact standards requirements.
Use current sources
Its exam source list may be updated. Check the RRS guidance page, April 2026 v1.1 guide and standards portal. EPA resources provide public health and homeowner context. State programs establish local licensing and recognition rules.
An older technical reference may remain useful background, but confirm that a current standard has not changed a procedure. Record the edition and access date for technical sources you use professionally.
The syllabus provides a useful map. Standards and regulations provide exact instructions, while field data establish whether a design fits a particular building.
Syllabus study takeaway
Read the domains as a connected job: understand source and behavior, diagnose the building, choose a strategy, install safely, evaluate performance and communicate. Each concept feeds the next.
When a topic feels isolated, ask what decision it changes. Pressure-field data affect suction-point choice; membrane details affect crawlspace performance; post-mitigation results guide troubleshooting.
The published outline is a preparation guide, not a guaranteed blueprint. Use it with authorized standards, approved courses and original practice scenarios.
Common questions
What are the NRSB RRS syllabus topics?
The current guide lists source and behavior, mitigation theory and design, dilution ventilation, ASD installation, crawlspaces, troubleshooting and radon-in-water mitigation.
Which RRS area has the largest published weight?
ASD Installation Process is listed at 30%, the largest single area in the April 2026 guide. The weight guides study, but does not guarantee every future exam form.
Do the RRS exam subject counts add to 125?
They can sum to more than the exam total because NRSB says some questions cover multiple areas. They are overlapping categories, not separate blocks.
Is the RRS syllabus the same as RMS?
No. RRS centers on mitigation design, installation and evaluation; RMS focuses on measurement specialization. Use the RRS section of the current NRSB guide.