Ratios and Proportions: Praxis Core Academic Skills For Educators: Mathematics 5733
A ratio compares quantities by division, and a proportion states that two ratios are equal.
- For Praxis Core Mathematics 5733, identify the units and order of each comparison before calculating.
- Equivalent ratios preserve the same multiplier; a unit rate expresses a comparison per one unit.
On this page12 sections
- Read the quantities before writing the ratio
- Simplify without changing the comparison
- Find a unit rate
- Solve a proportion by preserving equivalence
- Distinguish direct and inverse relationships
- Use a table to keep units and values aligned
- Scale drawings and similar figures
- Check estimates and reasonableness
- Common proportion errors
- A repeatable solution routine
- Use proportions only when the relationship stays constant
- Solve mixtures by tracking parts and total
Read the quantities before writing the ratio
A ratio compares two quantities through division. The order matters: a ratio of red counters to blue counters is not generally the same as blue to red. A ratio can be written as a:b, a/b or in words, but the units and compared groups should remain clear. Before simplifying, identify which amount belongs in the numerator and which belongs in the denominator.
Suppose a bag has 6 red counters and 9 blue counters. The ratio of red to blue is 6:9, which simplifies to 2:3 after dividing both terms by 3. The ratio of blue to red is 9:6 or 3:2. Both statements describe the same bag, but answer different questions. Label the direction instead of relying on two bare numbers.
A ratio of 2:3 does not mean there are exactly two and three objects. It describes a relationship. The quantities could be 2 and 3, 4 and 6, or 20 and 30. Multiplying or dividing both terms by the same nonzero value preserves an equivalent ratio. Adding the same amount to both terms generally does not.
Simplify without changing the comparison
To simplify a ratio of whole numbers, divide both terms by their greatest common factor. For 18 minutes to 30 minutes, divide each by 6 to get 3:5. Since both quantities use minutes, the units cancel in the comparison. If the units differ, convert to compatible units first or keep the unit labels explicit.
For a ratio of 2 meters to 50 centimeters, rewrite 2 meters as 200 centimeters. The ratio is then 200:50, or 4:1. Comparing 2 to 50 directly would mix units and produce a meaningless simplification. A conversion factor changes the measurement, not the physical quantity.
When decimals or fractions appear, a common strategy is to multiply both terms by the same value that clears denominators. For 1/2 to 3/4, multiply both terms by 4: the equivalent whole-number ratio is 2:3. This operation preserves the comparison because each term is scaled equally.
Find a unit rate
A unit rate compares a quantity with one unit of another quantity. Divide the first quantity by the second and preserve the units. If 180 kilometers are traveled in 3 hours, the average rate is 180/3=60 kilometers per hour. If the question asks for time per kilometer instead, invert the relationship: 3/180=1/60 hour per kilometer.
Read “per” as a useful clue, but still verify the direction. A price of $8 for 4 notebooks is $2 per notebook, calculated as 8 dollars divided by 4 notebooks. A different question might ask how many notebooks can be bought per dollar, which reverses the ratio. State the requested unit rate in words before dividing.
Unit rates support comparisons. Brand A offers 750 grams for $6, while Brand B offers 1,000 grams for $7. Brand A costs $6/750=$0.008 per gram, or $8 per kilogram. Brand B costs $7/1,000=$0.007 per gram, or $7 per kilogram, so Brand B is less expensive per unit. This compares value per mass, not package size or quality.
Solve a proportion by preserving equivalence
A proportion states that two ratios are equal. If a/b=c/d, with nonzero denominators, cross multiplication gives ad=bc. This is a way to solve an equation, not a separate magic rule. It works because multiplying both sides by bd clears the denominators. Keep the original quantities and units visible so the equation represents the situation.
Suppose 5 identical markers cost $7.50. At the same unit price, 8 markers cost x dollars. Set 5/7.50=8/x only if both ratios compare markers to dollars in the same order. Cross multiplication gives 5x=60, so x=$12. Check with the unit rate: $7.50/5=$1.50 each, and 8 times $1.50 is $12.
A proportion can be solved by scaling instead of cross multiplication when the relationship is straightforward. If 4 cups of flour make 12 muffins, then 1 cup makes 3 muffins and 6 cups make 18 muffins under the same recipe. The scaling method makes the constant relationship visible. Cross multiplication is convenient when the values are less friendly, but both methods should agree.
Distinguish direct and inverse relationships
In a direct proportion, one quantity changes by the same factor as the other. If a recipe doubles the servings while ingredient amounts remain proportional, each ingredient also doubles. The ratio of the two quantities stays constant. A graph of a direct proportional relationship is a line through the origin when the quantities are represented on linear axes.
An inverse relationship behaves differently: as one quantity increases, the other can decrease so that their product remains constant under the model. If 4 workers complete a fixed task in 6 hours at the same rate, the work total is 24 worker-hours. With 8 equally productive workers, the idealized time is 24/8=3 hours. Real tasks may not scale perfectly because coordination and other constraints matter.
Do not decide that a situation is direct or inverse only because one amount increases while another decreases. Identify the model supported by the wording. “Same speed” supports distance being directly proportional to time. “Same fixed amount of work and equal individual rates” can support an inverse worker-count and time model. If an assumption is absent, the problem may not determine a unique answer.
Use a table to keep units and values aligned
A two-column table can prevent quantities from being mismatched. Put one type of quantity in each column, label the units in the headings and place corresponding values on the same row. For example, if a printer makes 45 pages in 3 minutes, columns for pages and minutes show 45 opposite 3. The unit rate is 15 pages per minute; 8 minutes corresponds to 120 pages at the same constant rate.
If a problem changes both quantities but one is not proportional, a table may reveal the issue. A taxi fare with a fixed starting charge plus a per-mile amount is not a simple direct proportion between total fare and miles because the total is not zero at zero miles. Model it as a fixed amount plus a rate rather than forcing a constant ratio.
Scale drawings and similar figures
A scale drawing uses a constant ratio between drawing measurements and real measurements. If 1 centimeter represents 4 meters, a 6.5-centimeter drawing length corresponds to 26 meters. Convert units carefully: 6.5 centimeters times 4 meters per centimeter gives 26 meters. The centimeter units cancel, leaving meters.
For similar figures, corresponding side lengths share a scale factor. If a triangle is enlarged by a factor of 3, every side length triples. The perimeter also triples, but the area multiplies by 3 squared, or 9. Confusing a linear scale factor with an area factor is a common error. Keep track of whether a question asks about length, perimeter, area or volume.
Check estimates and reasonableness
Before solving, estimate the direction and rough size of the answer. If 4 items cost $10, 8 items at the same unit price should cost about $20, not $12 or $200. If a scale factor is greater than one, corresponding lengths should become longer. These checks can catch an inverted proportion or misplaced decimal.
After solving, substitute the result into the original statement. For the markers, 8 at $12 total means $12/8=$1.50 each, matching the original $1.50 per marker. This checks both the arithmetic and the meaning of the answer. If the units do not match the requested quantity, revisit the setup even if the numbers appear plausible.
Common proportion errors
One common error is reversing only one ratio. If you write 5 markers/7.50 dollars on the left, the right should also compare markers to dollars, such as 8 markers/x dollars. Reversing one side changes the equation. Put the units beside each number as you set up the proportion.
Another error is assuming that every pair of quantities is proportional. A fixed fee plus a variable charge, an accelerating rate or a changing recipe may not maintain a constant ratio. Check the context and the stated assumptions. A proportion is appropriate when the relationship remains constant across the values in the problem.
Finally, keep precision until the last step. Premature rounding can change a money or measurement result. If the problem states a rounding rule, follow it at the end. If no rule is given, provide an exact fraction or an appropriately precise decimal as the response format allows.
A repeatable solution routine
Name the two quantities and their units. Put them in the order the question requests. Convert compatible units, then decide whether the situation has a constant ratio, a unit rate or another model. Solve by scaling or by writing an equation, check the result in context and confirm that the units and size make sense.
ETS’s current 5733 companion determines whether ratios and proportions fall within the test outline; these examples teach the underlying mathematics and are original. For additional study, OpenStax’s mathematics text offers free explanations of ratio reasoning and proportional relationships. Practice both numerical calculations and word problems so you can select the correct model before carrying out arithmetic.
Use proportions only when the relationship stays constant
A proportion assumes the same rate or scale factor applies to both pairs. If a ride costs a fixed $3 entry fee plus $2 per mile, total cost is not directly proportional to miles: a zero-mile trip still costs $3. Model the fare as 3+2m. Cross multiplying a pair of totals as though their ratio were constant would produce an unreliable prediction.
For direct variation, check whether dividing one quantity by the other produces the same rate. A printer that consistently produces 15 pages per minute has a constant pages-to-minutes ratio. A worker count and job duration may have an inverse relationship under a fixed-work assumption. Read the conditions that support the model before choosing how to scale.
A proportion can also help with similarity. If a map uses 1 centimeter for 4 kilometers, 3.5 centimeters represent 14 kilometers. The conversion factor has units kilometers per centimeter, which cancel the map centimeters. If you reverse the factor, the units reveal the mistake. A scale statement should always show which direction the conversion runs.
On a selected-response item, a distractor may preserve the numbers but swap the order of quantities. Write the units above each ratio, such as miles/hours on both sides, then cross multiply. On numeric entry, solve the same relationship without options and verify by recomputing the unit rate. A single inverse operation can produce a plausible value in the wrong unit.
Solve mixtures by tracking parts and total
Suppose a drink is made from 2 parts concentrate and 5 parts water. The ratio concentrate:water is 2:5, while concentrate:total drink is 2:7. If the final drink contains 21 cups, each ratio part corresponds to 21/7=3 cups, so concentrate is 6 cups and water is 15. Confusing the second term with the total would produce the wrong amount.
If a recipe’s ingredient amounts are scaled by 1.5, every ingredient and the number of servings should scale by the same factor under the stated recipe. A fixed pan capacity or whole-item constraint can break that simple proportionality. State the assumptions and round only if the problem asks for a practical whole number.
Common questions
How do I set up a proportion?
Write two equivalent ratios in the same order, with matching units, then solve the equation. Check that the result fits the context and requested units.
What does a unit rate mean?
It is a comparison per one unit, such as dollars per notebook or kilometers per hour. Divide in the direction named by the question.
Can every word problem be solved with cross multiplication?
No. First confirm that the relationship is proportional. Fixed charges or changing rates may require a different model.