Percent Calculations: Praxis Core Academic Skills For Educators: Mathematics 5733
A percent is a rate per 100.
- For Praxis 5733 problems, convert the percent to a decimal or fraction, identify the base quantity, and choose whether you need a part, a whole or a percent change.
- Keeping the original amount as the denominator prevents many common errors.
On this page12 sections
- Translate percent into a rate
- Find the part, the whole or the percent
- Calculate percent increase or decrease
- Work with discounts, tax and successive rates
- Reverse a percentage change
- Compare percentage points with percent change
- Interpret a percent from a table or chart
- Use a proportion to solve percent problems
- Common mistakes and how to catch them
- A short checking routine
- Model percent problems with a base equation
- Use percent multipliers to compare successive changes
Translate percent into a rate
Percent means per hundred. The percent sign can be rewritten as division by 100: 18% = 18/100 = 0.18. Multiplying a base quantity by 0.18 finds 18 percent of that base. To convert a decimal to a percent, multiply by 100 and add the percent sign; to convert a percent to a decimal, divide by 100.
For example, 18% of 250 is 0.18 times 250, or 45. The result is smaller than 250 because the rate is below 100%. An estimate also helps: 20% of 250 is 50, so 45 is a reasonable nearby result. If a calculation gives 450, check whether the rate was multiplied by 10 rather than 0.1something.
A percent is a ratio with denominator 100, but it does not always describe a part of a single physical whole. A survey result may report a percentage of respondents; a tax is a percentage of a price; a percent change compares a difference with an earlier value. Identify the reference quantity before calculating.
Find the part, the whole or the percent
Many percent questions ask for one of three quantities. If you know the percent and whole, multiply to find the part: part=rate×whole. If you know the part and whole, divide to find the rate: rate=part/whole. If you know the part and rate, divide by the rate to find the whole: whole=part/rate. Use the rate as a decimal for these equations.
If 42 students represent 30% of a group, the whole group is 42/0.30=140 students. Multiplying 42 by 0.30 would answer a different question, namely 30% of 42. Label what is known and what is unknown before selecting an operation.
Suppose 36 of 48 questions on a practice set were answered correctly. The correct proportion is 36/48=0.75, or 75%. Here the numerator is the part and 48 is the whole. If the question instead asks what percent were incorrect, use 12/48=25%, or take the complement 100%−75%=25%.
Calculate percent increase or decrease
Percent change compares a difference with the original value: percent change=(new−original)/original×100%. A positive result indicates an increase; a negative result indicates a decrease. For a percent decrease, you can report the positive size of the decrease when the question asks how much it decreased. Always use the original amount as the denominator unless the prompt defines a different comparison.
A monthly bill rises from $80 to $92. The change is $12, and 12/80=0.15, so the increase is 15%. Dividing by $92 gives about 13.0%, but that compares the change with the new amount and does not answer the standard percent-change question. Mark “original” before dividing.
If a population falls from 5,000 to 4,600, the change is −400. Divide −400 by 5,000 to get −0.08, or an 8% decrease. The absolute new value is still 4,600; the percent describes the amount of change relative to the original population, not the new total.
A decrease followed by an equal percent increase does not return to the starting value because the second percentage uses a smaller base. A price of $100 reduced by 20% becomes $80. Increasing $80 by 20% adds $16, returning only to $96. The two rates are equal, but their base quantities differ.
Work with discounts, tax and successive rates
A discount of r percent reduces a starting price P to P(1−r), where r is written as a decimal. A 15% discount on $60 gives 60(0.85)=$51. If tax is applied after the discount, apply the tax rate to $51. At an illustrative 8% rate, the total is 51(1.08)=$55.08. Follow the sequence and assumptions in the problem.
Successive percentage changes multiply, rather than add. A 10% increase followed by a 10% decrease multiplies the starting amount by 1.10 and then 0.90; the net factor is 0.99, a 1% decrease. Adding +10% and −10% to get zero ignores that the second change applies to a different base.
If several discounts apply in sequence, calculate the resulting factor at each step. Two successive 20% discounts leave 0.80×0.80=0.64 of the original price, which is a 36% total reduction. It is not a 40% reduction. The exact order does not change the product of these two independent multiplicative factors, but taxes or fixed additions may be applied in a specified order.
Reverse a percentage change
To recover an original value after an increase, divide the final amount by 1 plus the rate. If a price after a 25% increase is $150, the original was 150/1.25=$120. Subtracting 25% of $150 would be wrong because the increase was calculated from the original $120, not the final $150.
To recover the original value after a discount, divide the sale price by one minus the discount rate. A price of $72 after a 10% discount corresponds to 72/0.90=$80. Adding 10% of $72 gives $79.20 and does not reverse the original reduction. Use the multiplier that transformed the original amount.
A useful check is to apply the stated change to your recovered original. If $120 increases by 25%, it becomes $150. If $80 is discounted by 10%, it becomes $72. Forward substitution checks the reverse calculation and makes the base explicit.
Compare percentage points with percent change
A change from 40% to 46% is an increase of 6 percentage points. Relative to the original 40%, it is a 6/40=15% increase. The two statements measure different things. Read carefully to see whether a question asks for an absolute difference in percentage points or a relative percent change.
This distinction also matters when comparing rates across groups. If one pass rate is 72% and another is 78%, their difference is 6 percentage points. It is not a 6% relative increase; relative to 72%, the increase is approximately 8.33%. Use the wording and denominator requested.
Interpret a percent from a table or chart
When a data display gives a percentage, inspect its denominator, category and period. A value of 24% might mean 24 of 100 people, a rate within one subgroup, or change from a baseline. Two percentages cannot be compared responsibly unless they use compatible definitions and populations.
If 15 of 60 respondents selected an option, the sample proportion is 15/60=25%. If another group has 24 of 120 respondents, its proportion is 20%. The first group has fewer total selections but a greater share. Raw counts and percentages answer different questions.
For a chart with stacked categories, add the relevant category percentages only if they share the same denominator and the question asks for their combined share. If a chart rounds values, the displayed totals may differ slightly from 100%. Do not invent precision beyond the table’s labels.
Use a proportion to solve percent problems
A percent equation can be expressed as part/whole=percent/100. If 27 is 45% of a number x, write 27/x=45/100. Cross multiplication gives 2,700=45x, so x=60. Alternatively, convert 45% to 0.45 and solve 27=0.45x. Both methods work when the part and whole are correctly identified.
If you use the proportion form, maintain corresponding positions. The part belongs over the whole, and the percent belongs over 100. Reversing one ratio changes the equation. Units can help: “students” should appear with both the count and whole, while a rate is unitless in this comparison.
Common mistakes and how to catch them
The most frequent mistake is using the wrong base. Percent increase uses the original value; a part-of-whole calculation uses the whole group; a subgroup percentage uses the subgroup as its denominator. Write the base in words before placing numbers into a formula.
A second error is treating 8% as 8 rather than 0.08. If a result is 100 times too large, check the conversion. A third is rounding too early. Keep a fraction or several decimal places through intermediate steps, then round only as requested.
Finally, distinguish a percentage from a percentage point and a percent change. A movement from 25% to 30% is 5 percentage points but 20% relative growth. A rate described as “20% higher” does not mean it rises by 20 percentage points. Translate the sentence into a calculation before choosing an answer.
A short checking routine
State the quantity that serves as the base, convert the percent to a decimal or fraction, and write the operation before calculating. Estimate the size and direction. Check units and substitute your result into the original relationship. For a change, test whether you divided by the original amount; for a reverse percentage, apply the forward multiplier to check recovery.
The ETS 5733 Study Companion is the source for the exam outline. The worked values here are original teaching cases. Use them to practice choosing the correct base and operation, then work fresh examples under timed conditions so the method transfers to new wording.
Model percent problems with a base equation
The sentence “A is p percent of B” translates to A=(p/100)B. This compact equation keeps part, rate and whole in their proper positions. If 18 is what percent of 72, solve 18=(p/100)(72), giving p=25. If 18 is 25% of B, solve 18=0.25B, giving B=72. Changing the unknown changes the algebra even when the numbers are the same.
Percent increase and decrease can be modeled with a multiplier. A 12% increase multiplies the original by 1.12; a 12% decrease multiplies by 0.88. If an amount becomes $224 after a 12% increase, the original was 224/1.12=$200. This reverse operation is more reliable than subtracting 12% of the final value.
When a discount and tax are applied in sequence, state which base each rate uses. A $50 item discounted 20% becomes $40; adding 8% tax to the discounted price gives $43.20. A calculation of 50(1−0.20+0.08)=$44 would add the rates against the original amount and ignore that the tax applies after the discount. Use the order stated in the problem.
A common estimate is to replace a complicated rate with a nearby benchmark. To estimate 19% of 310, 20% is 62, so the exact answer should be a little less. This does not replace the calculation, but it catches a decimal-place error. If the exact product is 589, the rate was likely entered as 1.9 instead of 0.19.
Use percent multipliers to compare successive changes
A value of 240 rises by 15% and then falls by 15%. The final value is 240(1.15)(0.85)=234.60, which is 2.25% below the original. The percentages cancel only when they use the same base, which they do not here. Multiplying factors captures the changing base at each step.
A tax or fee described as 7.5% can be represented as 0.075 times its base. If a problem says the fee is applied to a discounted subtotal, calculate the discount first and use the subtotal as the new base. If it says tax is applied before a discount, follow that order. The wording determines the relationship; do not impose a familiar retail sequence when the prompt states another.
Common questions
How do I calculate percent change?
Subtract the original value from the new value, divide by the original value and multiply by 100%. The original value is the standard denominator.
What is the difference between percentage points and percent change?
Percentage points measure the direct difference between two rates. Percent change divides that difference by the earlier rate to show relative change.
How do I find the original price after a discount?
Divide the discounted price by one minus the discount rate written as a decimal. For a 10% discount, divide by 0.90.