Practice questions: general requirements
General Requirements is 25 of 115 scored questions and is largely OSHA. These four cover fall protection triggers, scaffold capacity, reporting deadlines and the competent person definition.
Twenty-five questions, mostly numbers, and mostly answerable by lookup if your standards are tabbed.
An ironworker is connecting steel at 12 feet above a lower level during steel erection. Is fall protection required under Subpart R?
- Yes, the trigger is 6 feet
- Yes, the trigger is 10 feet
- No, the trigger in steel erection is 15 feet
- Only if a guardrail is impracticable
A supported scaffold will carry a maximum intended load of 500 pounds. What must it be capable of supporting?
- 500 pounds
- 1,000 pounds
- 2,000 pounds
- 3,000 pounds
An employee suffers an amputation on site. Within what period must it be reported to OSHA?
- 8 hours
- 24 hours
- 72 hours
- On the next OSHA 300 log entry
Who must inspect an excavation daily and is authorized to order work stopped?
- A qualified person
- A competent person
- A registered professional engineer
- The site superintendent
The pattern
Every wrong option here is a correct figure or term from a neighboring rule. That is how this category is written throughout.
Establish the activity before reaching for a number.
Common questions
What is the steel erection fall protection trigger?
15 feet, against 6 feet in general construction and 10 feet on a scaffold.
What load must a scaffold support?
Four times the maximum intended load, and six times for suspension ropes.
How soon must an amputation be reported?
24 hours. Only a fatality is 8 hours.
Who inspects an excavation daily?
A competent person, who can both identify hazards and order work stopped.
How are wrong options built in this category?
From correct figures belonging to a neighboring rule or a different activity.