IIQE Paper 2 Passing Score
The September 2026 PEAK handbook requires a minimum score of 70% to pass IIQE Paper 2.
- With 50 questions, 70% corresponds arithmetically to 35 correct answers if every item is equally weighted, but PEAK reports only PASS or FAIL and does not disclose exact scores, questions or answers.
- The handbook does not describe a scaled score.
On this page7 sections
- Published threshold
- Minimum 70% per paper
- Paper II total
- 50 multiple-choice questions
- Simple arithmetic
- 70% of 50 is 35
- Official result
- PASS or FAIL
- Score report
- Exact score, questions and correct answers are not disclosed
The current Paper 2 pass standard
The Insurance Intermediaries Qualifying Examination handbook effective 1 September 2026 says candidates need a minimum score of 70% to pass each paper. Paper II consists of 50 multiple-choice questions, so 70% of the published question total is 35. This is a straightforward arithmetic translation of the stated percentage. PEAK’s handbook reports the result as PASS or FAIL and says it will not disclose the exact score, the examination questions or the corresponding correct answers.
The exact-score limitation is important when interpreting candidate reports. A person who says they ‘just passed’ cannot establish a precise number of correct answers from the official result. Nor can a candidate use a result slip to learn which topics were answered incorrectly. Any exact score found on an unofficial forum or calculator should not be treated as a confirmed PEAK result unless the candidate has another legitimate source for it.
The handbook’s minimum is a percentage standard, not a guarantee about the difficulty of an individual paper. A 70% threshold tells candidates the published pass requirement. It does not mean that 70% is the average candidate score, that exactly 35 questions are always scored equally, or that the exam’s topic allocation is fixed. The handbook does not disclose whether any pretest items exist. Treat the published total as the preparation scope and answer all 50 questions.
| Statement | What official information supports |
|---|---|
| Minimum pass standard | 70% for each paper |
| Paper II question count | 50 compulsory MCQs |
| Simple 70% arithmetic | 35 of 50, if each item carries equal value |
| Reported result | PASS or FAIL |
| Exact candidate score | Not disclosed by PEAK |
Can you say the pass mark is 35 questions?
It is safe to explain the arithmetic: 0.70 multiplied by 50 equals 35. But be precise about the conclusion. The handbook publishes a minimum score of 70% and says Paper II has 50 questions. It does not provide an item weighting or conversion table in the cited format section. If each item contributes equally to the score, 35 correct answers would equal 70%; the public handbook does not separately spell out that item-level assumption. Avoid promising that a candidate with exactly 35 correct responses is guaranteed a pass under every scoring circumstance.
There is also no official evidence in the handbook extract of a scaled score, equating adjustment or sectional pass rule for Paper II. The stated standard is minimum 70% for each paper. Do not import a scoring system from another professional exam. If PEAK issues a later handbook with more detail, use the version effective for the exam date. Until then, describe the requirement as a 70% minimum and the 35-of-50 result as arithmetic, not as a separate official raw-score rule.
A candidate should use the 70% figure as a clear preparation benchmark but aim for a margin in practice. A single 35/50 result on an unofficial quiz is not a safety buffer: the quiz may be easier, narrower or differently worded than the official paper. Repeated fresh sets above the threshold, across all syllabus sections and under the time limit, provide better evidence of readiness. They still do not guarantee the official outcome.
No reported section scores
The result is PASS or FAIL and that exact scores will not be disclosed. It also says questions and correct answers are not disclosed. The published result therefore does not identify whether a candidate’s weakness was in motor, property, marine, underwriting, claims or customer service. A candidate who needs to retake Paper II should rely on private practice records and a structured content review rather than waiting for topic feedback that PEAK does not provide.
Build your own topic-level record before the examination. For each original question, note the syllabus section, the concept tested, whether the answer was correct, confidence level and reason for any error. A correct guess should be marked uncertain. Over time, the record can show that a candidate consistently confuses public liability with employers’ liability, or recognizes the definition of a deductible but applies it incorrectly in an example. This is useful feedback that the official result does not provide.
Use the record diagnostically rather than as a prediction model. If a candidate scores 80% in a set focused on property but 58% in mixed questions, the difference may reflect topic coverage, question construction, timing or chance. Review the items and their rationales before deciding. Avoid converting a small number of practice questions into a claim about the exact likelihood of passing. The official exam’s question distribution and candidate-specific result are not public.
Scaled scores, raw scores and the published rule
Likewise, no published Paper II section weights are supplied in the syllabus PDF. The syllabus names product categories and operational topics but does not state that each chapter has a fixed share of the exam. A study provider can choose to teach one section longer than another, but that teaching choice is not proof of official weighting. Cover the syllabus comprehensively and adjust effort based on your own errors.
Use practice scores responsibly
Practice results are useful when the questions are original, aligned to the syllabus and reviewed. They are misleading when a candidate treats them as official predictions or counts repeated memorized items as fresh evidence. Start with a timed baseline, then study the rationales. Retest after a delay using new questions that examine the same concepts in different scenarios. This checks transfer rather than recall of an answer letter.
A useful readiness rule is to look for consistent performance across sections and conditions. If you repeatedly miss the same concept, review the official note or source and explain the rule in your own words. If accuracy falls only under the clock, use timed practice and improve question triage. If you answer correctly but cannot explain why the distractors are wrong, your understanding may be fragile. A score alone hides these patterns.
For instance, suppose you score 39 of 50, then miss a later set with many marine and liability scenarios. The first score looks encouraging but does not reveal whether the earlier set overrepresented familiar topics. Break each set down by section and question type. If your product identification is strong but wording application weak, practise policy schedules, exclusions, conditions and settlement clauses. This approach converts a broad exam mark into a targeted study action.
A sample calculation
Assume a practice set contains 50 equally weighted questions and a candidate answers 38 correctly. The arithmetic score is 38 divided by 50, or 76%. That is six percentage points above the published 70% minimum. If the candidate answered 33 correctly, the result would be 66%, below the minimum. These calculations describe that practice set only. They do not reveal how PEAK scored a particular official sitting.
If a smaller quiz has 20 questions, 14 correct is 70% and 15 correct is 75%. Candidates should avoid comparing a 20-question quiz and a 50-question set without considering sample size. One question changes the small quiz score by five percentage points. A short quiz can help review a concept but is a noisy basis for readiness. Use more questions over time and record the specific errors.
| Correct out of 50 | Arithmetic percentage | How to use the result |
|---|---|---|
| 35 | 70% | At the published percentage threshold in a hypothetical equally weighted set |
| 38 | 76% | Some margin in that practice set; inspect section balance |
| 42 | 84% | Strong result on that set, not a pass guarantee |
| 33 | 66% | Below the published threshold; review errors before booking or retaking |
The table is arithmetic, not an official PEAK conversion chart. It assumes each practice item contributes equally. A candidate should use it as a way to understand percentages and then focus on the underlying knowledge. Do not let one point of arithmetic distract from a repeated misconception that could appear in another question form.
What to do after PASS or FAIL
A PASS means the candidate met PEAK’s exam standard for Paper II. The result does not, by itself, establish that the person is licensed to conduct general insurance business. The handbook associates general insurance with Papers I and II, and the IA’s licensing requirements apply separately. Candidates should keep the result and confirm the remaining requirements with the IA or proposed appointing entity.
A FAIL does not tell the candidate how far they were from the threshold or which topics caused the result. Avoid drawing exact conclusions from the binary result. Review your own practice log, revisit weak parts of the syllabus and book a new session when prepared. Check current enrolment restrictions: PPME limits the same paper to no more than one session in a calendar week, and CSME prohibits booking the same session of the same paper more than once. The handbook does not support inventing a universal waiting period.
A candidate who is concerned about a result can check the official remarking procedure. The handbook lists HKD500 per paper and says the fee is normally not refundable, except if the original result is found incorrect. Verify the request deadline and conditions directly in the current handbook. Since PEAK does not disclose exact scores or answers, a remark is not a route to obtain an item-by-item review.