Sitonce
Country: US
Show exams for United States Hong Kong
Sign in

IIQE Paper 2 Format and Timing

Updated 11 min read
Key takeaway

IIQE Paper 2 has 50 compulsory multiple-choice questions and lasts 75 minutes.

  • Each paper appears in English and Chinese, candidates may choose pencil-and-paper or computer-screen mode, and the pass standard is 70%.
  • The handbook does not publish a scored versus pretest split or disclose exact scores and answers.
On this page9 sections
  1. Paper II in one sitting
  2. What the syllabus does to the question style
  3. Pencil-and-paper versus computer-screen
  4. Bilingual question presentation
  5. Pacing a 75-minute paper
  6. How the 70% standard works
  7. What the syllabus does not specify
  8. A short practice set
  9. Prepare for the actual interface
Questions
50, all compulsory
Time
75 minutes
Question type
Multiple-choice
Languages
English and Chinese together
Pass standard
At least 70%
Modes
PPME and CSME; RIME addressed in a separate handbook
Published result
PASS or FAIL; exact score and answers are not released

Paper II in one sitting

Paper II is the General Insurance paper in the Insurance Intermediaries Qualifying Examination. Under the PEAK Exam Centre handbook effective 1 September 2026, it contains 50 multiple-choice questions and lasts 1 hour 15 minutes. Every question is compulsory. The questions are presented in English and Chinese together. The exam may be taken in pencil-and-paper mode or computer-screen mode under the standard handbook, and the minimum passing score is 70%.

The 50-question count is the published total. The handbook does not state that a portion is experimental or unscored, so do not subtract hypothetical pretest questions when setting a practice target. It also does not reveal the exact result score or correct answers. A candidate receives PASS or FAIL. That reporting system means personal diagnostic records and timed practice are the only practical way to identify which subjects need more attention before the sitting.

The 75-minute time limit averages 1 minute 30 seconds per question. That is a planning average, not a guarantee that every item takes the same time. A short question about a policy term may take seconds; a scenario requiring careful identification of a peril, exclusion or duty may take longer. A candidate should practise reading the full stem, separating relevant facts from background detail and selecting the answer that follows from the wording.

Format featurePublished Paper II rulePreparation implication
Question count50Cover all major syllabus sections
Time75 minutesPractise at about 90 seconds per item on average
Question typeMultiple-choiceCompare all options and identify the decisive distinction
Compulsory statusAll questionsDo not plan to skip a topic or leave an item blank
Language displayEnglish and Chinese togetherUse the language wording that clarifies meaning, while checking the same concept
ResultPASS or FAILTrack practice errors independently

What the syllabus does to the question style

The official Paper II syllabus spans four main areas: insurance products; underwriting and policy wording; claims; and customer service. Product questions may ask candidates to distinguish a cover type or identify an insured exposure. Underwriting questions may test whether a fact affects risk assessment or which step follows a proposal. Policy-wording questions may hinge on an exclusion, condition, deductible or cancellation term. Claims questions may concern notification, evidence, settlement or dispute. Customer-service questions may require an appropriate organizational response or recognition of a regulatory obligation.

The format is multiple-choice, but this does not mean each item is a pure definition recall. A scenario can contain a customer, a policy and a loss, then ask which statement is most accurate. A distractor may use a true phrase in the wrong context, confuse a product with an extension, or ignore a policy condition. Candidates should therefore build both memory and application. Knowing that a motor policy can include third-party liability is not enough if the scenario asks whether damage to the insured’s own car is covered under a limited policy tier.

For example, a question might say a shop’s stock is damaged by a burst pipe, then list four answers about a fire policy. The relevant reasoning is not simply ‘property is insured.’ Identify the peril insured, the exact wording, any extension for escape of water, exclusions and the schedule. Another question may describe a customer who disclosed a change in business activity; the key issue could be an underwriting update rather than an immediate claim decision. Practice should mirror those transitions from facts to contractual result.

Pencil-and-paper versus computer-screen

The standard PEAK handbook offers PPME and CSME for Paper II. The published question count, duration and pass standard are the same. PPME involves a paper examination; CSME uses an on-screen system. The handbook recommends that CSME candidates familiarize themselves with the system using the online demonstration. Candidates must input their own login information, and PEAK says invigilators will not do that for them.

A candidate choosing CSME should practise with screen reading and the available navigation controls. A screen can make it harder for some readers to hold several lines of a long scenario in working memory. The candidate can compensate by reading the question being asked first, then reviewing the facts and options in order. Follow the system’s actual instructions about marking or moving between questions; do not rely on assumptions based on another exam platform.

A PPME candidate may be more comfortable reading on paper and visually comparing options. That familiarity can support pacing, but the candidate should still follow the examination regulations about writing or marking materials. Do not assume the paper can be taken away, annotated freely or used in a particular way unless the current instructions say so. The exam-day handbook and invigilator instructions control.

Remote invigilation is also mentioned for Papers I, II and III, but the standard handbook directs candidates to a separate RIME handbook. Confirm the current remote handbook for its booking, technical, environmental and identification requirements. A RIME candidate should not rely on the PPME/CSME description alone. A format choice includes practical reliability: stable equipment and a compliant environment can matter as much as personal preference.

Bilingual question presentation

Each examination paper is presented in both English and Chinese. Both versions appear together. A bilingual presentation can help clarify terminology, but it also asks the candidate to pay attention to meaning rather than translate word by word. Insurance terms may have a precise contractual or statutory sense. When two language versions seem different, use the complete question and answer choices and follow any examination instructions about interpretation.

Build a personal glossary for concepts that are easy to confuse: peril and hazard; condition and exclusion; premium and excess; indemnity and agreed value; insured and claimant; renewal and reinstatement. Add Chinese equivalents only if they help you recognize the concept. The purpose is to preserve the insurance relationship in both languages, not to memorize a list detached from a policy example.

A practice routine can be bilingual without doubling study time. Read a topic explanation in the language you find clearest, then work through selected terms in the other language and confirm that they describe the same concept. If a technical term has a legal definition, prioritize the official statute or policy wording over a casual translation. A familiar translation can still be wrong in a specific contract.

Pacing a 75-minute paper

The arithmetic gives an average of 90 seconds per question. A useful first pass is to answer items where the rule is clear and read each stem carefully enough to avoid a preventable error. If an item is unusually long, identify what it asks before evaluating the details. Avoid spending several minutes debating between two options when a missing definition or policy condition is the real issue. If the selected mode permits reviewing questions, follow the system instructions and return to marked items after the first pass.

Try a three-part timing plan in practice: approximately 50 minutes for a first pass through all questions, 15 minutes to revisit items where you can narrow the options, and 10 minutes for a final check. This is a suggested exercise, not an official PEAK formula. Some candidates may prefer a different split. The essential point is to preserve time to see every question because all are compulsory. Practise the plan on original questions rather than predicting an exact paper distribution.

Use an error tag when reviewing practice: knowledge gap, misread fact, confused product, ignored wording, calculation error or rushed selection. Then decide what to change. A knowledge gap needs available information. A misread may need a slower first read or attention to words like ‘except’ and ‘most likely.’ A calculation error needs a written method. A confused product needs side-by-side comparison. This converts timing practice into learning rather than merely repeated exposure.

During a final pass, check for unanswered questions and confirm that the selected option matches the exact issue asked. Do not change a clear answer solely because time is running out. Change it only when you identify a specific reason, such as overlooking a condition or using the wrong policy tier. all questions are compulsory; a candidate should use the permitted response process to provide an answer for each item.

How the 70% standard works

PEAK requires a minimum score of 70% to pass each paper. Although 70% of 50 is 35, this arithmetic is not enough to claim that exactly 35 correct answers guarantees a pass. The handbook states the percentage threshold but reports only PASS or FAIL and does not provide exact marks or correct answers. The syllabus and handbook provide the applicable standard; the official result is the final determination for that sitting.

The result does not show whether a candidate missed a product question or a claims question. Build a scorecard during practice by syllabus area. If a timed set contains ten product questions and the candidate misses four, the next review should target the misunderstood products and the reason for each error. Such a scorecard is a personal study tool, not a reconstruction of the official exam blueprint.

Do not use a single high mock score as proof that a pass is certain. Practice questions may not match the actual difficulty, wording or topic distribution. Use several fresh sets under timed conditions and look for stable performance across sections. Review all errors, including lucky guesses: a guessed answer that happens to be correct still signals uncertainty. The official result cannot be predicted from any third-party score conversion.

What the syllabus does not specify

The handbook publishes 50 questions but does not confirm a scored versus pretest split. It also does not release exact scores, actual exam questions or the correct answers. Candidates should therefore treat all 50 as potentially scored for preparation and comply with the rules for the entire paper. Do not repeat claims that a fixed number can safely be ignored unless the current official handbook changes and confirms the point.

The public format information also does not reveal the precise topic allocation for a future sitting. The syllabus lists the examinable areas but does not provide a stable percentage by product. A study plan should cover the whole syllabus rather than overinvesting in a topic based on an unsupported prediction. If a study provider publishes a weighting estimate, ask how it was derived and distinguish that estimate from the official syllabus.

Likewise, the handbook’s PASS/FAIL result does not promise access to item-level feedback. It says the questions and answers will not be disclosed. Candidates should keep their own practice notes before the exam and use those notes if a retake is needed. This is particularly useful for distinguishing a true content weakness from time pressure or a mode-specific issue.

A short practice set

Example question

A commercial policy schedule lists fire cover for the restaurant’s contents. A kitchen fire damages a neighbouring shop. Which issue most directly determines whether the restaurant’s policy responds to the neighbour’s claim?

  1. Whether the restaurant has public liability cover that applies to the alleged legal liability
  2. Whether the restaurant’s own contents sum insured is high enough
  3. Whether the kitchen equipment is less than five years old
  4. Whether the restaurant has a business interruption extension
Answer: A. A neighbour’s claim is a third-party liability question. The contents sum insured and business interruption extension concern the insured’s own losses. Age of the equipment may matter to underwriting or valuation but does not establish liability cover.
Example question

A motor policy includes third-party liability only. The insured’s car is damaged in a collision caused by the insured. What is the key coverage point?

  1. Third-party liability cover generally addresses liability to others, not damage to the insured’s own car
  2. The policy automatically becomes comprehensive after an accident
  3. The insurer must pay because the insured caused the collision
  4. The car is covered only if the third party has no insurance
Answer: A. Third-party cover and own-damage cover are separate. A policy limited to third-party liability does not ordinarily insure the insured vehicle’s own collision damage. The precise wording controls.
Example question

An applicant omits a material change in the business activity on a proposal form. What is the best underwriting response before cover is accepted?

  1. Obtain accurate information and reassess the risk and terms
  2. Assume the omission cannot affect the insurer
  3. Issue a certificate first and ask about it after a loss
  4. Treat the applicant’s premium as proof that every activity is covered
Answer: A. The proposal and underwriting process depend on accurate risk information. The insurer may reassess acceptance, price or terms. A premium payment alone does not establish the scope of cover.

These questions illustrate how the exam can connect format with syllabus reasoning. Each item turns on one distinction: first-party property versus third-party liability, a cover section versus another section, or proposal disclosure versus post-loss investigation. Read every option fully. A distractor may be true in a different part of the policy and still be wrong for the facts given.

Prepare for the actual interface

If you book CSME, complete PEAK’s system demonstration before exam day. Learn how the system presents questions, how you move among them and what the candidate must enter. The handbook warns that candidates are responsible for correct commands and login details. Do not use the exam itself as your first experience with the interface. If you book PPME, practise with a paper question set and check what materials the centre permits.

Whatever the mode, use a timer during at least some practice. A 50-question set completed without a limit does not show whether you can sustain attention for 75 minutes. Build a routine for reading each stem, noting the tested issue, eliminating options that contradict the facts and checking the chosen answer. Then review the set against the syllabus. The goal is not to memorize practice-item wording but to recognize the concept when details change.