Sitonce
Country: US
Show exams for United States Hong Kong
Sign in

TExES Mathematics/Physical Science/Engineering 6-12 274 Master Guide 2026

Updated 22 min read
Key takeaway

TExES Mathematics/Physical Science/Engineering 6-12 (274) is a computer-administered test with 135 selected-response questions and a five-hour appointment.

  • Its 12 domains span mathematics, inquiry, physics, chemistry, science instruction, and engineering.
  • The passing scaled score is 240.
  • Candidates bring an approved graphing calculator; definitions, formulas, physical constants, and a periodic table are available on screen.
On this page24 sections
  1. What TExES Mathematics/Physical Science/Engineering 6-12 assesses
  2. Eligibility and certification steps
  3. Registration, fee and appointment availability
  4. Format, time and on-screen references
  5. Passing score and results
  6. Review the twelve domains
  7. An original worked example: acceleration and force
  8. An original chemistry example: mole ratios
  9. Start with the current preparation materials and map all 52 competencies to your notes. Use a mixed diagnostic to identify gaps across physics, chemistry, inquiry and instruction. Label each miss by cause: concept, equation selection, units, graph reading, investigation design or assessment judgment. Set study time from those errors and the approximate domain weights; do not convert the percentages into guaranteed item counts.
  10. First-attempt pass-rate context
  11. Official materials and study resources
  12. Results and retakes
  13. How to use the twelve-domain map
  14. Understand the registration and appointment sequence
  15. A six-week preparation pattern
  16. What the pass-rate report can and cannot tell you
  17. Final readiness check
  18. Mathematics across the blueprint
  19. Engineering method and profession
  20. Use domain weights without predicting the test form
  21. An integrated math and engineering example
  22. A balanced preparation sequence
  23. Format, tools, and time
  24. After a score and certification limits
Number Concepts
5%
Patterns and Algebra
12%
Geometry and Measurement
7%
Probability and Statistics
5%
Mathematical Processes and Perspectives
3%
Mathematical Learning, Instruction and Assessment
3%
Scientific Inquiry and Processes
5%
Physics
13%
Chemistry
14%
Science Learning, Instruction and Assessment
3%
The Engineering Method
17%
The Engineering Profession
13%

What TExES Mathematics/Physical Science/Engineering 6-12 assesses

The official Mathematics/Physical Science/Engineering 6-12 framework tests whether a candidate has the knowledge and skills expected of an entry-level Texas public-school educator in this field. Its outline combines physical science content with scientific investigation and teaching. Candidates need to solve physics and chemistry problems, reason about evidence and safety, and apply knowledge of how students learn and how science is assessed. The exam is not an unbounded college physics or chemistry final: the competencies and descriptive statements set the relevant scope.

The 52 competencies are grouped into twelve domains with approximate weights: Number Concepts 5%, Patterns and Algebra 12%, Geometry and Measurement 7%, Probability and Statistics 5%, Mathematical Processes and Perspectives 3%, Mathematical Learning, Instruction and Assessment 3%, Scientific Inquiry and Processes 5%, Physics 13%, Chemistry 14%, Science Learning, Instruction and Assessment 3%, The Engineering Method 17%, and The Engineering Profession 13%. The percentages are published blueprint weights, not guaranteed item counts or a prediction of which subtopics appear on a particular administration.

Engineering Method has the largest approximate single-domain weight at 17%. Chemistry is 14%; Physics and Engineering Profession are 13% each. Mathematics is spread across six domains totaling 35%. This breadth means preparation should cover mathematical skills, physical science, inquiry, instruction, design, and engineering practice rather than overrelying on one college major or teaching specialty.

Eligibility and certification steps

Confirm with your educator preparation program which assessment and certificate route apply before registering. Texas certification pathways vary. A person completing an approved educator preparation program, an educator adding a certificate and an applicant whose credentials are reviewed from another state may follow different requirements. Do not assume that the presence of Mathematics/Physical Science/Engineering 6-12 in a search result means every science teacher candidate must take code 274.

Passing the exam does not itself award a Texas teaching certificate. Initial teacher certification generally involves an approved educator preparation program plus required tests, application and other route conditions. The Texas Education Agency and your EPP establish your requirements. Keep the exact certificate name and route in view; an exam result is one record within that process, not a complete credential.

Registration, fee and appointment availability

The base exam fee is $116 for code 274. Additional fees may apply. The amount at the official checkout is the amount to rely on. This base charge is not necessarily the candidate’s all-in preparation or travel cost. The official system handles registration and appointment scheduling after the candidate’s route and eligibility have been confirmed.

The exam is available by appointment year-round. That describes when the program may administer it; it does not guarantee a seat at a preferred center or date. Availability changes. Check the live Pearson appointment system before booking travel or promising an EPP that a score will arrive by a particular deadline. Test sites are located in Texas and nationwide.

Texas policy distinguishes cancelling the booked appointment from withdrawing the exam registration. A timely cancellation and a separate account withdrawal are required for the applicable refund, which is reduced by $25; payment-processing funds are nonrefundable. A no-show receives no refund or credit, and an unused registration expires after 170 days if the candidate neither tests nor withdraws on time. Review current payment terms before changing an appointment.

Format, time and on-screen references

The exam has 135 selected-response questions and a five-hour total appointment. The five hours include 15 minutes for a CAT tutorial and compliance agreement, leaving four hours and 45 minutes of testing. This is not five hours of question answering. The computer-administered exam may include questions evaluated for future administrations that do not affect the score; Pearson does not publish a precise scored-item split on the test page.

Pearson provides on-screen definitions and formulas, definitions and physical constants, and a periodic table for code 274. Candidates bring an approved graphing calculator. Practice reading values and using the calculator interface, but do not assume the exact layout of a study resource will match Pearson’s software. Check the current test page and rules before test day in case policies change.

The selected-response description matters for practice. A candidate chooses the best answer rather than composing an extended response. That does not make the reasoning shallow: distractors can expose unit mistakes, incorrect vector directions, conservation errors, bad model assumptions or confusion between a prediction and evidence. Practice explaining why a tempting alternative fails, not only identifying a formula.

Passing score and results

The passing scaled score is 240. It is not a percentage and cannot be converted into a fixed number correct from the published page. A scaled score is produced through the testing program’s scoring process; candidates should not rely on an unofficial raw-score table or claim that a particular percent correct guarantees a pass. Pearson’s score report and current guidance control.

Scores are available at 10:00 p.m. Central time on listed score-report dates. Its current table identifies earliest dates and says reports are issued within seven days of testing. Match your appointment period to the current table. A general turnaround estimate is not a confirmed date, and score availability is separate from how your EPP or TEA records the result.

Review the twelve domains

Scientific inquiry and processes

This domain includes laboratory and field safety, measurement, data display and analysis, experimental design, evidence, models, peer review and the limits of scientific claims. It also covers systems, scientific history and ethics, and applying evidence to decisions. Be ready to identify a controlled variable, evaluate a source of error or distinguish a conclusion supported by data from a claim that goes beyond it.

Scientific explanations are subject to revision when new evidence warrants it. A model can help explain a system while remaining limited: a motion diagram, atomic model or circuit schematic highlights some relationships and omits others. For an investigation question, identify what was measured, how instruments were used, whether comparison conditions were fair and what alternative explanation remains possible.

Physics

Physics is approximately 13 percent and spans motion, forces, gravitation, electricity and magnetism, energy and momentum, thermodynamics, waves and quantum concepts. The framework expects candidates to interpret graphs and vectors, build free-body diagrams, apply Newton’s laws, reason about projectiles and circuits, and connect models with devices or observations. A prior physics course helps, but the exam also tests whether you can select the right model for an unfamiliar prompt.

For quantitative questions, draw a diagram, mark directions and units, and state assumptions before calculating. A position-time slope represents velocity, while a velocity-time slope represents acceleration. A free-body diagram shows forces acting on one chosen object. In a series circuit, current is shared through a single path; in parallel, branches share potential difference. Explain the physical meaning of a result instead of stopping at a number.

Chemistry

Chemistry is approximately 14 percent and includes matter and atomic structure, gases, bonding, chemical equations, solutions, energy changes, nuclear processes, redox and acids and bases. The competencies ask for more than recognizing terminology: candidates may need to calculate isotope averages, interpret molecular structure, balance equations, apply mole ratios, analyze equilibrium or connect calorimetry data with energy transfer.

For reaction calculations, balance formulas using coefficients, convert amounts to moles, apply ratios and track units. For an acid-base question, distinguish strength from concentration and identify the model or quantity requested. In a solution problem, keep molarity and other concentration measures distinct. These relationships are broadly useful, but the framework does not publish a guaranteed count for each chemistry subtopic.

Science learning, instruction and assessment

This domain concerns student prior knowledge, accessible inquiry, instructional design, engagement, reading and technology in science, TEKS, and assessment in classroom, field and laboratory settings. It includes formative and summative purposes, student misconceptions, validity, reliability, fairness and using assessment evidence to guide instruction. A strong teaching response addresses what the student’s work reveals and aligns the activity or assessment with the learning objective.

For instance, if a student says that a catalyst increases the final amount of product at equilibrium, ask the student to compare reaction-rate evidence and equilibrium data before supplying a correction. The goal is to surface the misconception and connect evidence to the concept. Choosing a teaching response requires both science content and a judgment about what will help the learner reason more accurately.

An original worked example: acceleration and force

A cart of mass 4 kg experiences a 12 N force to the right and a 4 N friction force to the left. The net horizontal force is 8 N right, so Newton’s second law gives acceleration a = F_net/m = 8/4 = 2 m/s² to the right. The result depends on subtracting opposing forces before dividing by mass. If the two forces were equal, the net force and acceleration would be zero even if the cart were already moving.

The check is physical as well as arithmetic: a larger mass under the same net force would accelerate less, and reversing the net force would reverse acceleration. Draw the two forces on the cart, not the forces it exerts on the floor. This original example connects a free-body diagram to a selected-response calculation without implying the exact content of a live form.

An original chemistry example: mole ratios

For 2H₂ + O₂ → 2H₂O, 3.0 mol hydrogen requires 1.5 mol oxygen. If 2.0 mol oxygen is available, hydrogen is limiting and can produce 3.0 mol water. The coefficient ratio supplies the relationship; compare potential product from each reactant rather than choosing the smaller starting amount. This is an original practice example, not an official Pearson item.

Example question

A 4 kg cart experiences a 12 N force to the right and a 4 N friction force to the left. What is its acceleration?

  1. 2 m/s² to the right.
  2. 2 m/s² to the left.
  3. 4 m/s² to the right.
  4. 3 m/s² to the right.
Answer: A. The net force is 8 N to the right. Newton’s second law gives a = Fnet/m = 8/4 = 2 m/s² to the right.

Start with the current preparation materials and map all 52 competencies to your notes. Use a mixed diagnostic to identify gaps across physics, chemistry, inquiry and instruction. Label each miss by cause: concept, equation selection, units, graph reading, investigation design or assessment judgment. Set study time from those errors and the approximate domain weights; do not convert the percentages into guaranteed item counts.

Use a recurring cycle: retrieve an idea without notes, solve a new problem, explain the reasoning, and schedule a delayed review. Interleave related ideas once their basic procedures are understood. Alternate mechanics and circuit problems with chemical calculations or evidence interpretation so you must choose the relevant model. Practice with the on-screen reference resources and calculator. Include both short skill sessions and mixed sets.

First-attempt pass-rate context

TEA’s statewide 2024-25 report lists a 64% rounded first-attempt pass rate for 39 Mathematics/Physical Science/Engineering 6-12 (274) candidates. The group’s size matters when interpreting a rounded percentage. The figure does not estimate an individual candidate’s chance, describe the current test form or change the Pearson passing standard of 240. Use cohort data as historical context and build readiness decisions from your own performance on fresh practice.

Do not make preparation a race through increasingly advanced textbooks. The official competencies define the target. A college text can explain a concept, but the exam’s inclusion of a topic does not imply every advanced derivation is necessary. Spend more time on the reasoning and applications the outline names. A difficult item often tests selecting a valid model, tracking units and honoring assumptions rather than recalling an obscure equation.

Published cohort results and difficulty

TEA’s 2024-25 statewide first-attempt report lists a rounded pass rate of 64% for Mathematics/Physical Science/Engineering 6-12 (274), based on 39 candidates. This is historical group data for the program year candidates began testing, not a current pass rate, individual probability or preparation target. The cohort is small, so a few outcomes affect the percentage. Do not confuse the reported cohort percentage with Pearson’s 240 passing scaled score.

Official materials and study resources

Pearson’s code-specific preparation materials link the framework, preparation manual, sample selected-response questions, correct responses and rationales, study-planning worksheets, and test-experience tutorials. Use these first because they are aligned to code 274. Official sample questions illustrate style but cannot predict a score or guarantee topic distribution. After attempting an item, review its rationale and identify the misconception behind each distractor.

For concept review, use current physics and chemistry references with clear explanations of mechanics, circuits, atoms, reactions, solutions and energy. Open educational resources can help, but verify that the assumptions and depth match the framework. For lab safety, use current institutional and regulatory guidance rather than an old textbook procedure. Write original practice examples that teach the underlying concept instead of presenting official items as your own.

Check any commercial practice product against code 274, the present framework and the current selected-response format. A generic science bank may contain useful concepts but not the right distribution or pedagogy emphasis. Avoid claims that a third-party mock exactly predicts a scaled result unless the testing program supports that claim. This is a private preparation draft; it does not announce a course, mock or other product.

Results and retakes

If the score is below 240, use the official report and your error record to identify gaps. Confirm eligibility and obtain any required educator preparation program approval before registering again. Current Texas policy generally requires a 30-day interval between attempts and prior results to post before registration. The general certification-test limit is five total attempts before a waiver is required, with route-specific exceptions; confirm the current policy for your case.

A useful retake plan changes the method, not just the calendar. If calculation errors came from setup, annotate units and assumptions. If conceptual distractors were the issue, explain why alternatives fail. If fatigue was a factor, practice longer mixed blocks and review logistics. Confirm score reporting, approval and retake rules through TEA and Pearson before making a high-stakes plan.

How to use the twelve-domain map

A candidate with a chemistry degree may still need concentrated physics practice, while a physics specialist may need to refresh reaction calculations, bonding, gases and solutions. The domain weights help ensure that neither discipline disappears. Inquiry tasks can also be embedded inside science content: a question about acceleration data tests physics and measurement, while a calorimetry investigation combines chemistry, thermal energy and experimental design. The separate domains organize the framework; they do not make scientific reasoning separate in practice.

Make a coverage matrix with one row for each of the 52 competencies and columns for familiarity, practice evidence and next action. For example, a candidate may know Newton’s second law but struggle to draw forces on an inclined object. Record that precise gap rather than marking all mechanics as weak. For pedagogy, evidence might be the ability to match a diagnostic question to a student misconception. A competency is ready for spaced review when you can perform its stated task on a fresh example and explain the reasoning.

Understand the registration and appointment sequence

First confirm that code 274 is approved for your Texas certificate route. Then create or use the Pearson account, register for the exam and search the live appointment calendar. Year-round scheduling means the program offers appointments across the year, not that a particular center has unlimited seats. Plan around preparation readiness, travel and score-report timing. Save the confirmation and verify the appointment details before making a nonrefundable travel commitment.

The listed $116 base fee is only the Pearson exam charge identified on the test page; the page says additional fees may apply. Preparation materials, transportation and time away from work are separate personal costs. If an appointment must change, distinguish a schedule change from withdrawing the registration. Texas rules require the applicable steps and deadlines for a refund; a no-show is not refunded. Check live terms before taking action.

A six-week preparation pattern

With six weeks available, use the first few days for the official framework, a mixed diagnostic and a coverage map. In Week 1, strengthen motion, graphs, vectors and Newtonian forces. Week 2 can cover energy, thermodynamics, waves and electricity. Week 3 can focus on atoms, bonding, gases and quantitative chemistry. Week 4 can address equations, solutions, equilibrium, redox, nuclear topics and chemical energy. Each week should also include inquiry and teaching tasks rather than postponing them.

Use Week 5 for mixed practice, correcting recurring errors and revisiting weak competencies across all twelve domains. Week 6 should include fresh selected-response sets, one longer timed session if useful, and a final review of tools and appointment logistics. The sequence is an example, not a guaranteed recipe: a candidate with stronger physics and weaker chemistry should rebalance it. If preparation remains uneven, extend the timeline rather than treating the calendar as proof of readiness.

What the pass-rate report can and cannot tell you

TEA’s 2024-25 table groups first-attempt examinees by the program year they began testing and reports rounded statewide percentages. It lists 39 candidates for code 274 and a 64 percent pass rate. This measure differs from the exam’s passing scaled score: 240 is the score standard, while 64 percent describes outcomes in a historical cohort. The figure does not estimate the chance that a particular person will pass and does not indicate the difficulty of a specific form.

Small cohorts deserve particular care. A few candidates can shift the rounded rate by several percentage points. The report also concerns first attempts, not the share who pass eventually or a provider’s results. Use the number to understand historical cohort context, then assess your own readiness through performance across the framework, confidence calibration and error correction. Do not use a rate as a pass target or promise.

Final readiness check

Before the appointment, explain key models without notes, solve representative problems with units, interpret an unfamiliar graph and distinguish reaction rate from equilibrium. Be able to draw a force diagram, reason about a simple circuit, balance an equation and describe how evidence can test an explanation. Explain how you would assess a student misconception in science. This is more revealing than rereading a full set of notes.

Review the appointment confirmation, plan travel and use only materials permitted by current rules. Pearson provides on-screen definitions and formulas, definitions and physical constants, and a Periodic Table for code 274; candidates bring an approved graphing calculator. Practice with those tools, but use study time for relationships, units and reasoning instead of memorizing values supplied on screen.

The published distribution argues for reviewing every domain from the start. The three largest domains are The Engineering Method (17%), Chemistry (14%), and Physics and The Engineering Profession (13% each). Mathematics spans six domains and together accounts for 35%. These are approximate blueprint weights, not guaranteed item counts. Cover the full 52 competencies and use your diagnostic to decide where additional practice is most useful.

DomainApproximate weightStudy evidence
Number Concepts5%Use number representations and operations accurately
Patterns and Algebra12%Model relationships and analyze functions
Geometry and Measurement7%Reason from figures, measures, and transformations
Probability and Statistics5%Interpret data and probability models
Mathematical Processes and Perspectives3%Communicate and justify mathematical reasoning
Mathematical Learning, Instruction and Assessment3%Interpret learner evidence and instructional choices
Scientific Inquiry and Processes5%Design investigations and evaluate evidence
Physics13%Connect models, forces, energy, waves, and applications
Chemistry14%Reason about matter, reactions, solutions, and energy
Science Learning, Instruction and Assessment3%Match assessment and teaching to learning goals
The Engineering Method17%Define, model, test, and improve designs
The Engineering Profession13%Apply professional knowledge and responsibilities

Use a final mastery check before the appointment. Choose one task from each domain: evaluate an investigation or measurement, solve a physics problem, explain a chemical relationship, and respond to a student-learning scenario. Work without notes, then explain why the answer fits the conditions and why a tempting alternative fails. If an area remains uncertain, identify whether it needs content review, a worked example or a clearer reading of the prompt.

Keep administrative facts separate from study estimates. Pearson controls exam format, appointment information, tools and score reporting; TEA and the EPP determine route-specific certification steps. A study plan can suggest how to practice, but it cannot authorize a candidate or guarantee an outcome. When a fact could change, check the current official page and note the date.

Mathematics across the blueprint

Mathematics is a substantial part of 274, distributed over six domains rather than isolated in one algebra section. Number Concepts is approximately 5%; Patterns and Algebra 12%; Geometry and Measurement 7%; Probability and Statistics 5%; Mathematical Processes and Perspectives 3%; and Mathematical Learning, Instruction and Assessment 3%. The framework includes functions, equations, geometric reasoning, statistics, probability, and mathematical practice. Exact wording and examples are in the official guide.

The questions may situate mathematics in a scientific or engineering task. Work on units, proportions, graphs, functions, geometric relationships, and data interpretation can transfer across those settings. A formula alone is not enough if a candidate cannot identify variables or interpret a result. During preparation, alternate direct skill practice with applied problems so you learn both the calculation and its meaning.

Engineering method and profession

Engineering accounts for 30% of the approximate blueprint weight: The Engineering Method is 17% and The Engineering Profession is 13%. The method covers design work such as defining a need, managing requirements and constraints, developing and testing designs, interpreting results, and communicating decisions. The profession domain addresses contexts and responsibilities of engineering practice. Consult the framework for detailed competencies; do not substitute an engineering textbook’s chapter list for this test map.

Design questions reward evidence-based choices. Identify the requirement, screen out options that violate hard constraints, compare feasible options against criteria, and explain tradeoffs. A test result supports only the conditions tested. Keep system assumptions and limitations visible. Professional questions may involve teamwork, ethics, careers, or the role of engineering; answer from the stated facts and the framework rather than assuming a single job setting.

Use domain weights without predicting the test form

The percentage assigned to a domain is an approximate blueprint weight, not a promise about a particular form or an item count. It is reasonable to use the weights to prevent neglecting a broad area, but not to conclude that a fixed number of questions will be drawn from every subtopic. There are 135 listed selected-response questions; the public outline does not provide a guaranteed topic-by-topic allocation.

The 2024-25 TEA first-attempt report lists 39 candidates and a rounded 64% pass rate for code 274. The sample is small. This percentage describes that historical cohort and does not estimate an individual candidate’s probability, the difficulty of a current form, or a preparation threshold. Pearson’s published passing score remains 240 scaled. Use cohort data as context and your own fresh mixed practice to assess readiness.

An integrated math and engineering example

A team evaluates a small cooling enclosure. It must stay below a maximum cost and fit a fixed shelf. The temperature response can be modeled with an exponential function, while the outside dimensions set a volume constraint. A useful first step is to translate each condition into variables and inequalities, then reject concepts that cannot fit. Next, test the heat-transfer assumptions and compare materials using evidence. A mathematically feasible model does not prove that a manufactured enclosure will perform as predicted.

Suppose two wall designs meet the size constraint. One costs less but has higher estimated heat leakage; the other reduces leakage but requires a larger energy budget. A decision should compare total system requirements, including sensor load and operating time, rather than choosing on material cost alone. State which criterion is decisive and what additional test would reduce uncertainty. This is an original study example, not an official Pearson item.

A balanced preparation sequence

Begin by downloading the official preparation materials and mapping all 52 competencies. Take a diagnostic that samples each area, including mathematics, inquiry, physics, chemistry, teaching and engineering. For each miss, label the cause: missing concept, equation choice, calculation, graph interpretation, experimental design, constraint tradeoff, or reading error. The label directs the next study session and makes improvement measurable.

Use a repeating cycle: learn or refresh one competency, solve representative problems without notes, explain the reasoning, and revisit errors after a delay. Mix domains once the basics are stable. For example, combine a function graph with a physical interpretation, or combine a force calculation with a design constraint. Mixed work trains topic recognition and reduces reliance on cues from a chapter heading.

Allocate more review to weak and higher-weight areas while preserving weekly contact with every domain. A candidate with strong engineering experience may still need refreshers in chemistry or statistics; a math specialist may need to practice design iteration and professional contexts. Recheck the official framework if a study resource’s scope appears broader or narrower than the exam outline.

Format, tools, and time

The exam has 135 selected-response questions and a five-hour appointment. The appointment includes a 15-minute tutorial and compliance agreement, leaving four hours and 45 minutes of testing. The arithmetic average is about 2.1 testing minutes per listed question, but that is not an official item limit and questions differ in reading and calculation demands. Use timed practice to build pacing judgment rather than forcing identical time on every item.

Candidates bring an approved graphing calculator. Pearson lists on-screen definitions and formulas, definitions and physical constants, and a periodic table. Confirm current calculator requirements and test-day instructions on Pearson/NES before the appointment. During practice, locate reference information efficiently and independently verify whether the chosen formula matches the problem. A reference sheet can provide information; it cannot select the model or interpret an answer.

After a score and certification limits

Pearson reports a scaled score, and the published passing score is 240. A scaled score is not a direct raw percentage. Follow the official score-report table for the release date tied to your appointment. If a score is below the standard, inspect the feedback Pearson supplies, revisit relevant framework competencies, and check current retake waiting periods and attempt rules before booking again.

Passing 274 does not by itself issue a Texas certificate. The candidate’s certificate area and route determine which exams and preparation steps apply. Confirm test approval, educator preparation, application, fingerprinting, and any other current requirements with TEA and the relevant educator preparation program. Do not infer that a broad exam title automatically matches every mathematics, science, or engineering teaching assignment.

Common questions

How many questions are on TExES Mathematics/Physical Science/Engineering 274?

The exam has 135 selected-response questions. The five-hour appointment includes 15 minutes for the tutorial and compliance agreement, leaving four hours and 45 minutes of testing.

What is the passing score for Mathematics/Physical Science/Engineering 6-12?

The published passing scaled score for code 274 is 240. It is not a percentage or a fixed raw number correct.

Can I use a calculator on TExES 274?

Pearson provides on-screen definitions and formulas, definitions and physical constants, and a periodic table. Candidates bring an approved graphing calculator; follow current instructions.

Does passing TExES 274 make me a certified teacher?

No. The exam is one part of a Texas certification route. TEA and the relevant educator preparation program determine any remaining requirements.