Forces and Motion: TExES Physics/Mathematics 7-12 243
The TExES 243 physics framework includes mechanics concepts such as motion, forces and interactions.
- Practice defining a system, reading position and velocity graphs, drawing free-body diagrams, finding net force, and applying Newton’s laws with units and direction.
- Use the current Pearson framework for exact scope and reliable physics references for concept review.
On this page7 sections
Connect motion descriptions and graphs
Forces and motion are central mechanics topics in the TExES Physics/Mathematics 7-12 (243) framework. Pearson’s current preparation manual defines the exact tested competencies; this guide develops foundational reasoning and examples. Begin by distinguishing position, displacement, distance, speed, velocity and acceleration. Distance and speed are scalar quantities; displacement and velocity include direction. Acceleration describes change in velocity over time, which can occur through a change in speed, direction or both.
On a position-time graph, slope represents velocity. A horizontal segment means position is constant and velocity is zero. A steeper slope means greater speed, and a negative slope indicates motion in the negative direction under the chosen axis convention. On a velocity-time graph, slope represents acceleration and area under the curve represents displacement. Read the axes and units before interpreting any graph; the same visual slope has a different physical meaning when the vertical quantity changes.
Average velocity is displacement divided by elapsed time, while average speed is total distance divided by elapsed time. They may have different values if the path reverses direction. For example, a student walks 12 meters east and then 4 meters west in 8 seconds. Total distance is 16 meters, so average speed is 2 meters per second. Displacement is 8 meters east, so average velocity is 1 meter per second east. State the reference direction explicitly.
For constant acceleration, the kinematic equations connect initial velocity, final velocity, acceleration, time and displacement. Select an equation that uses known quantities and solves for the target. Check whether constant acceleration is justified. If acceleration changes, a constant-acceleration equation may not apply over the whole interval. A graph or calculus representation may be more appropriate. Estimate the direction and magnitude before calculating so that signs and units can be checked.
Draw a free-body diagram before calculating
A free-body diagram isolates the chosen object or system and shows external forces acting on it. Common forces include gravitational force, normal force, tension, applied force, friction and spring force. Do not draw velocity or acceleration as forces. Choose axes suited to the problem and label magnitudes or components. The diagram helps distinguish the forces on an object from the forces it exerts on other objects, which is essential when applying Newton’s laws.
Weight near Earth’s surface is approximately mg, directed toward Earth’s center. Mass measures inertia and is not the same as weight. A scale’s normal force can differ from mg when the object accelerates vertically. On an incline, resolve the gravitational force into components parallel and perpendicular to the surface. The normal force is determined by the perpendicular force balance, not automatically equal to mg. Identify the geometry and sign convention before writing equations.
Friction acts along a surface and opposes relative motion or the tendency of motion, depending on whether it is kinetic or static. Tension acts along a taut connector. A spring force depends on displacement from equilibrium and follows Hooke’s law in the linear region. State any idealizations, such as negligible air resistance or a massless string. A useful model makes assumptions visible rather than hiding them inside a memorized equation.
A system boundary determines which interactions are external and which are internal. If two objects are treated together as one system, their internal action-reaction forces cancel in the net system force. If analyzing one object alone, both members of an interaction pair do not act on that same object. Be precise about the selected body. This helps avoid the common error of adding forces that act on a different object.
Apply Newton’s laws
Newton’s first law describes inertial motion: when net external force is zero, velocity remains constant. A stationary object and an object moving at constant velocity are both consistent with zero acceleration. The law does not say that motion requires a continuing force in the direction of travel. A net force is required to change velocity, not to maintain ideal uniform motion. Distinguish balanced forces from no forces at all.
Newton’s second law is commonly written as the vector relationship net force equals mass times acceleration. In one dimension, choose a positive direction and sum signed forces. In two dimensions, resolve components. For example, a 4-kilogram cart experiences 18 newtons east, 6 newtons west and 4 newtons of friction west. Net force is 18 - 6 - 4 = 8 newtons east; acceleration is 8/4 = 2 meters per second squared east. The result’s direction and units should agree with the model.
Newton’s third law pairs forces that two objects exert on one another. The forces are equal in magnitude and opposite in direction, but they act on different objects, so they do not cancel in the free-body diagram of one object. A swimmer pushes water backward; the water exerts a forward force on the swimmer. The swimmer’s acceleration depends on the net force on the swimmer, including other interactions. Identify the interacting bodies before naming an action-reaction pair.
When forces are balanced, acceleration is zero. This does not require the object’s velocity to be zero. If a box moves across a floor at constant speed, the horizontal push and kinetic friction may balance, while normal force and weight balance vertically. If the push increases, the net force becomes nonzero and the box accelerates. Compare forces by axis rather than assuming all forces oppose one another in a single line.
Use momentum and impulse where appropriate
Momentum is mass times velocity and therefore a vector. The net external impulse equals the change in momentum. Impulse can be represented as average net force times time interval, or as the area under a force-time graph. For a fixed momentum change, increasing contact time lowers average force. Airbags and padding illustrate this idea in practical contexts, although the model should not be used to infer detailed safety outcomes without additional information.
Momentum is conserved for an appropriately isolated system when net external impulse is negligible. In a collision, conserve total momentum across objects, with signs or vectors representing direction. Kinetic energy is conserved in an ideal elastic collision but not in an inelastic collision; momentum can still be conserved if the system is isolated. Do not confuse those statements. Identify the system and external forces before applying a conservation equation.
Consider two carts on a low-friction track: a 2-kilogram cart moves east at 3 meters per second and collides with a stationary 1-kilogram cart. If they stick together, total initial momentum is 6 kilogram-meters per second east and combined mass is 3 kilograms, so their shared final velocity is 2 meters per second east. This original example assumes negligible external impulse during the collision. It illustrates momentum conservation, not kinetic-energy conservation.
Force-time graphs support impulse analysis. If a net force increases linearly from zero to 10 newtons over 2 seconds, the impulse is the triangular area, (1/2)(2 s)(10 N) = 10 newton-seconds. That equals the momentum change. Check graph axes and units. A graph of applied force rather than net force may require accounting for other forces before relating area to momentum change.
Relate circular motion and gravitation
Uniform circular motion has changing velocity direction and therefore centripetal acceleration toward the center. The required net inward force is associated with the interactions present, such as tension, gravity, normal force or friction. “Centripetal force” names the net inward role, not an additional force to draw alongside the actual interactions. Draw the diagram and determine which real forces provide the inward resultant.
For an object moving at speed v on a circle of radius r, centripetal acceleration has magnitude v²/r. If speed doubles while radius stays fixed, required acceleration quadruples. If radius doubles at fixed speed, acceleration halves. These proportional relationships help check answers. In a vertical circle or a banked turn, force components depend on position and geometry, so avoid applying a simple horizontal model without examining the situation.
Newton’s universal gravitation describes attraction between masses, while near Earth’s surface weight is a useful approximation. Distinguish gravitational field strength from gravitational force and recognize that g can vary with location. Orbits arise from gravitational acceleration combined with tangential velocity, not from gravity disappearing. Use the level of model named in the official framework and state assumptions about distance, bodies and conditions.
Common misconceptions and checks
A frequent misconception is that an object moving right must have a net force right. It may move right while slowing under a net force left. Motion describes velocity; force determines acceleration. Another error is to call the normal force equal to weight in every situation. That is true only under particular vertical conditions. Draw forces and write component equations to establish the relationship rather than relying on a memorized picture.
A third-law pair is often mistaken for a balanced-force pair on one object. The two forces in a pair act on different objects. A fourth common issue is failing to distinguish mass from weight or speed from velocity. For every result, include units and direction. A scalar answer where a vector is required is incomplete. A direction can be stated in words or through a signed component, as long as the convention is clear.
Use dimensional analysis: newtons equal kilograms times meters per second squared. Momentum has kilogram-meters per second, and impulse has newton-seconds, which are equivalent units. If an equation produces a force in meters per second or acceleration in kilograms, revisit the setup. Check limiting behavior too: if net force is zero, acceleration should be zero; if mass increases at fixed net force, acceleration should decrease.
Technology can graph motion, fit data and calculate numerical values, but the model must be understood first. Pearson permits approved graphing calculators subject to current rules, and candidates should verify the allowed list. A calculator cannot tell whether the force diagram includes all interactions or whether a graph’s axes are interpreted correctly. Use it to analyze or check, then explain the physical meaning of the output.
A practical study approach
Study motion, forces and momentum through varied representations. Translate a word problem into a sketch, a graph into a description, and a force diagram into component equations. Practice both conceptual and numerical items. For each problem, identify the system, known values, requested quantity, assumptions and sign convention. Solve, then check units, direction and reasonableness. Change one condition in a solved example and predict the effect before recalculating.
Use question review to identify the first incorrect step. If the net force is wrong, inspect the diagram; if acceleration is wrong, check division and mass; if direction is wrong, revisit the sign convention. If a momentum answer fails, check which objects belong in the system and whether external impulse is negligible. Keep the correction focused on that cause, and test it later with a fresh example.
Map study to the official 243 physics competencies and the wider scientific inquiry domain. The exam also covers mathematics, so review vectors, algebra, functions, units and graph interpretation. The teaching domains ask candidates to reason about student understanding, assessment and learning activities. A complete plan therefore combines mechanics content with the mathematical tools and instructional skills described in the official manual.
These mechanics examples are original practice, not Pearson test questions. They do not predict the live item mix or provide a scaled-score estimate. Use the current framework for exact scope and reputable physics material for further explanations. Then use new problems to test transfer. Strong force and motion reasoning supports later work in energy, circular motion and fields, but it should be one part of balanced preparation.
When interpreting a motion graph, distinguish a secant slope from a tangent slope if the velocity changes continuously. A secant on a position-time curve gives average velocity over an interval; a tangent slope gives instantaneous velocity at a point. On a velocity-time curve, the analogous slopes describe average and instantaneous acceleration. Area under a velocity-time graph yields displacement, including sign. If the graph crosses zero velocity, total distance requires adding magnitudes of interval displacements rather than taking only the signed net.
A candidate should also distinguish a force diagram from a motion diagram. The first shows interactions acting on a selected body; the second can show positions at successive times or motion direction. A spacing pattern may suggest speeding up or slowing down, but it does not identify the force by itself. Use Newton's laws to connect net interaction to acceleration. This separates observable motion from the model that explains its change.
Common questions
Does an object need a force to keep moving?
Not in the ideal first-law model. Net force changes velocity; zero net force is consistent with constant velocity.
Do Newton’s third-law forces cancel?
They act on different objects, so they do not cancel in the free-body diagram of one object.
How do I find net force?
Choose axes, draw the system’s external forces and sum their components with consistent signs.
What graph slope gives acceleration?
The slope of a velocity-time graph gives acceleration. Position-time slope gives velocity.