Sitonce
Country: US
Show exams for United States Hong Kong
Sign in

Chemical Equilibrium: TExES Chemistry 7-12 240

Updated 10 min read
Key takeaway

TExES Chemistry 7-12 (240) expects candidates to understand and solve chemical-equilibrium problems.

  • Write the balanced reaction and its equilibrium expression, distinguish current Q from equilibrium K, and use an ICE table when concentrations are requested.
  • For stress questions, identify what changed and separate a qualitative shift from a change in K caused by temperature.
On this page24 sections
  1. Framework placement
  2. Dynamic equilibrium
  3. Writing an equilibrium expression
  4. What K tells you
  5. Reaction quotient Q
  6. Original Q example
  7. ICE tables
  8. Setting up a simple ICE problem
  9. Le Chatelier's principle
  10. Concentration changes
  11. Pressure and volume
  12. Temperature changes K
  13. Catalysts and equilibrium
  14. Heterogeneous equilibria
  15. Kp and Kc
  16. Common chemicals and safety
  17. Equilibrium and incomplete reaction
  18. Original selected-response item
  19. Misconceptions to correct
  20. A problem-solving routine
  21. Official scope and supplemental sources
  22. Solve and check an equilibrium amount
  23. Pressure example for a gas equilibrium
  24. Equilibrium constants and units
Framework
Domain III: Chemical Reactions
Competency
012: kinetics and equilibrium
Equilibrium idea
Forward and reverse rates equal; concentrations remain constant
Calculation tools
K expression, Q comparison and ICE table

Framework placement

Competency 012 in Domain III, Chemical Reactions, covers reaction rates and chemical equilibrium. Its statements expect candidates to analyze temperature, pressure, concentration and catalysts; determine rate laws from experimental data; understand equilibrium principles; solve equilibrium problems; and predict reactivity of common household chemicals. This article focuses on equilibrium and its calculation. Kinetics is related but distinct: rate describes how fast change occurs, while equilibrium describes the condition reached in a reversible system under specified conditions.

Dynamic equilibrium

A reversible reaction can proceed forward and backward. At dynamic equilibrium in a closed system, forward and reverse reaction rates are equal, so concentrations remain constant over time. They do not have to be equal to one another. A container can have much more reactant than product at equilibrium if the equilibrium favors reactants. The word dynamic matters: particles continue reacting even though macroscopic concentrations no longer show a net change.

Writing an equilibrium expression

For a general reaction aA + bB reversible to cC + dD, the concentration equilibrium constant is Kc = [C]^c[D]^d / ([A]^a[B]^b). Coefficients become exponents. Pure solids and pure liquids are omitted because their effective concentrations are constant in the equilibrium expression. Use the balanced equation as written; scaling the reaction changes the numerical value of K. Check phase labels before inserting every species.

What K tells you

At a specified temperature, K describes the relative product and reactant amounts at equilibrium according to the expression. A large K indicates products are favored relative to reactants for that written reaction; a small K indicates reactants are favored. K is not a rate constant and does not state how quickly equilibrium is reached. Nor does a large K mean the reaction is instantaneous or complete in a literal sense.

Reaction quotient Q

The reaction quotient Q uses the same expression form as K but can be calculated from current, not necessarily equilibrium, concentrations. Compare Q with K. If Q is less than K, the system can shift forward toward products; if Q is greater than K, it can shift in the reverse direction; if equal, the mixture is at equilibrium under the model. This comparison avoids guessing direction from a recent concentration change.

Original Q example

Suppose the model reaction A reversible to B has Kc = 4.0 at a stated temperature. A mixture currently has [A] = 1.0 mol/L and [B] = 1.0 mol/L, so Q = 1.0. Since Q is below K, the forward direction increases B relative to A until the ratio reaches the equilibrium relationship. These are invented values used to illustrate the comparison, not measured chemistry data.

ICE tables

An initial-change-equilibrium table organizes concentration changes for a reaction. Write initial amounts, express changes in terms of x with signs based on direction, and derive equilibrium amounts. Substitute those expressions into K and solve. Check that the solution is physically possible: concentrations cannot be negative, and x cannot exceed the amount available for consumption. If the algebra gives impossible values, revisit the setup, reaction direction, units or assumptions.

Setting up a simple ICE problem

For A reversible to B with initial [A] = 1.0 mol/L and [B] = 0, let x mol/L of A convert to B. Equilibrium amounts are 1.0 - x and x. If Kc is supplied, substitute x divided by 1.0 - x and solve for x. The table makes conservation visible and prevents using initial values in place of equilibrium concentrations. A more complicated reaction uses coefficients to scale each change.

Le Chatelier's principle

When a system at equilibrium experiences a change in concentration, pressure, volume or temperature, its composition shifts in a direction that partially opposes the change under the model. This principle predicts direction; it does not by itself calculate a new equilibrium composition. Use Q and K or an ICE table for amounts. Clearly name what was changed and which side of the balanced equation is affected.

Concentration changes

Adding a reactant or removing a product commonly makes Q smaller relative to K and prompts a forward shift. Adding product commonly produces a reverse shift. A catalyst changes the rate at which equilibrium is reached but does not change K or the equilibrium composition at a fixed temperature. Adding an inert species at constant volume generally does not alter reacting-gas partial pressures in the simple model; changing volume can.

Pressure and volume

For gas equilibria, changing volume changes partial pressures and can shift composition when the balanced reaction has unequal moles of gaseous species on the two sides. Compression increases pressure and tends to favor the side with fewer gas moles in the basic Le Chatelier model. If gas mole counts are equal, there may be no composition shift from this factor. Count gaseous coefficients, not solids or liquids.

Temperature changes K

Temperature is the condition that changes the equilibrium constant. Treat heat as a reactant for an endothermic forward reaction and as a product for an exothermic forward reaction. Raising temperature therefore favors the endothermic direction in the simplified equilibrium model; lowering temperature favors the exothermic direction. A concentration or pressure adjustment can shift composition without changing K at constant temperature. This distinction is often tested.

Catalysts and equilibrium

A catalyst provides a pathway that speeds both forward and reverse processes. It helps a system reach equilibrium sooner but does not alter the equilibrium constant or final equilibrium composition at a given temperature. This differs from changing temperature, which changes K. A catalyst also does not change the thermodynamic energy difference between reactants and products. Keep rate, activation barrier and equilibrium position separate.

Heterogeneous equilibria

In a heterogeneous equilibrium, species occupy different phases. Pure solids and liquids are excluded from the equilibrium expression, but gases and dissolved species appear. For example, a solid carbonate decomposing to a solid oxide and carbon dioxide has a gas term in Kp or an appropriate concentration expression, while the pure solids are omitted. Do not remove dissolved ions simply because they are in water; their phase is aqueous, not pure liquid.

Kp and Kc

For gaseous reactions, Kp uses partial pressures and Kc uses molar concentrations. Their relationship depends on temperature and the change in moles of gas between products and reactants. Use the relation only when the prompt supplies or expects the necessary quantities, and keep units and standard conventions clear. Do not substitute total pressure for each component's partial pressure unless the mixture information justifies it.

Common chemicals and safety

The competency mentions common household chemicals as contexts for predicting reactivity. Names such as baking soda, bleach and ammonia can appear in conceptual scenarios, but never infer that household products are safe to mix. Real products vary in composition and label instructions. Study the chemistry in the framework's intended way and follow manufacturer and institutional safety guidance. This article does not recommend experiments or combinations of consumer chemicals.

Equilibrium and incomplete reaction

A reversible reaction can reach equilibrium without consuming all reactants. Product yield depends on the equilibrium position and initial composition, but kinetics and separation processes may also matter. A catalyst can help reach the same equilibrium faster, while removing a product may shift the system and allow additional formation. Do not equate a reaction at equilibrium with a stopped reaction or a fully exhausted reactant.

Original selected-response item

For an exothermic forward reaction at equilibrium, what is the expected effect of increasing temperature? A. K increases and products are always made faster. B. The equilibrium shifts toward reactants and K changes. C. A catalyst is produced. D. K stays fixed because only concentration affects it. The best answer is B: heat acts as a product, so adding heat favors the reverse, endothermic direction and changes K. This is original practice content.

Misconceptions to correct

Typical errors include treating equilibrium concentrations as equal, using initial instead of equilibrium values in K, including pure solids in the expression, reversing the Q-versus-K comparison, and saying a catalyst changes K. Start each problem by writing the balanced reaction and the exact expression. Mark the system phases and temperature. Then calculate Q or organize an ICE table. This sequence catches conceptual errors before arithmetic begins.

A problem-solving routine

Write the balanced equation, identify phases, and form K with the correct exponents. For a direction question, compute Q from the current state and compare it with K. For an equilibrium amount, define changes in a table, substitute equilibrium concentrations, solve, and check physical validity. For a stress question, separate qualitative shift from numerical calculation and state whether temperature changed. Keep a brief explanation next to the math so the result has chemical meaning.

Official scope and supplemental sources

Pearson/NES defines the code 240 competency and provides preparation materials and sample question style. OpenStax Chemistry 2e can supplement explanations of chemical equilibrium, reaction quotient and equilibrium calculations. A supplemental textbook is not an exam blueprint, and calculations should follow the conditions given in each problem rather than an unstated universal assumption.

Example question

A system has equilibrium constant K = 4.0. Its current reaction quotient is Q = 1.0. Which direction is favored as it moves toward equilibrium?

  1. Forward, toward products
  2. Reverse, toward reactants
  3. Neither; Q equals K
  4. The catalyst direction
Answer: A. Because Q is less than K, the current product-to-reactant ratio is below the equilibrium ratio, so the forward direction is favored.

Solve and check an equilibrium amount

For the fictional A reversible to B system with [A] initially 1.0 mol/L and no B, let x be the amount converted. At equilibrium, [A] is 1.0 minus x and [B] is x. If Kc is 4.0, then x divided by 1.0 minus x equals 4.0. Solving gives x = 0.80 mol/L, leaving 0.20 mol/L A. The values satisfy the given model and conserve the total concentration in this one-to-one isomerization example. After solving any quadratic, reject a root that makes a concentration negative.

Pressure example for a gas equilibrium

Imagine X2 gas in equilibrium with two X gas particles. Compression raises pressure, so the simplified Le Chatelier prediction favors the side with fewer gas moles, X2. Expansion favors the side with more gas moles, X. This qualitative comparison counts only gaseous coefficients and does not calculate the new mixture. A catalyst changes neither direction preference nor final composition. This invented example helps isolate pressure effects; actual applications require the correct balanced reaction and conditions.

Equilibrium constants and units

The exact conventions for reporting equilibrium constants depend on the thermodynamic standard states and how the course presents concentration or pressure expressions. In many introductory calculations, Kc is handled as a numerical expression from molar concentrations. Follow the notation, units and conventions provided by the question rather than adding assumptions from a different source. In all cases, exponents come from the balanced reaction coefficients, and pure solids and liquids are omitted in the standard expression used for heterogeneous equilibrium.

Common questions

Are reactant and product concentrations equal at equilibrium?

No. At dynamic equilibrium, forward and reverse rates are equal and concentrations are constant, but their values need not match.

Does a catalyst change the equilibrium constant?

No. A catalyst speeds the approach to equilibrium but does not change K or the equilibrium composition at a fixed temperature.

What is the difference between K and Q?

K uses equilibrium concentrations or pressures. Q has the same expression form but uses current values; comparing Q with K predicts the direction of shift.

What changes the value of K?

Changing temperature changes K. Concentration or pressure changes may shift the composition while K remains fixed at the same temperature.