Sitonce
Country: US
Show exams for United States Hong Kong
Sign in

TExES Life Science 7-12 238 Format and Timing

Updated 9 min read
Key takeaway

TExES Life Science 7-12 (238) is a computer-administered test with 100 selected-response questions.

  • Pearson lists a five-hour appointment, including 15 minutes for the CAT tutorial and compliance agreement, leaving four hours and 45 minutes for testing.
  • The official code-specific page does not list a constructed-response section; some items may be unscored and are not identified individually.
On this page12 sections
  1. How many questions are on TExES 238?
  2. How long is the test appointment?
  3. What selected response asks you to do
  4. Computer-based testing
  5. Reference materials and tools
  6. Timing strategy for a long appointment
  7. Original question-format example
  8. Common format misunderstandings
  9. Study and practice implications
  10. What the public format information does not tell you
  11. The key facts
  12. A practical way to apply this topic
Question count
100 selected-response questions
Appointment length
5 hours total
Tutorial and agreement
15 minutes
Testing time
4 hours 45 minutes
Delivery
Computer-administered test (CAT)
Scored-item split
Not published on the test page

How many questions are on TExES 238?

The exam has 100 selected-response questions for Life Science 7-12 (238). Selected response means the candidate chooses among answer options displayed by the computer. The test page does not list an essay, constructed response or laboratory performance section for this code. Do not transfer a format from another TExES code or a newer assessment simply because it is also a science exam.

The 100-question figure refers to the listed presented question count, not necessarily the number of items used to calculate the final result. An exam may contain questions evaluated for future administrations that do not affect a candidate's score. The reviewed public page does not state how many such items may appear or provide a way to identify them during a session. Treat each question as if it matters; do not try to spot unscored items.

How long is the test appointment?

The total appointment is five hours. Pearson allocates 15 minutes to the CAT tutorial and compliance agreement and four hours and 45 minutes to testing. That means five hours is the appointment window, not the time available to answer questions. Plan transportation and personal arrangements around the full appointment rather than leaving immediately after the nominal test portion begins.

If you want to estimate pacing, dividing four hours and 45 minutes by 100 gives an average of about 2.85 minutes per presented question. This is only arithmetic, not an official pacing rule. Some questions may take less time and others more. A candidate can use a first pass to answer straightforward items and mark uncertain items if the interface permits, then return with remaining time. Review the CAT tutorial and current provider instructions rather than assuming navigation features.

Part of appointmentPublished timePlanning implication
CAT tutorial and compliance agreement15 minutesFollow on-screen instructions before testing
Testing portion4 hours 45 minutesBudget this as question time
Total appointment5 hoursArrange travel and obligations around the full period

What selected response asks you to do

Selected-response questions can test recall, application, interpretation and judgment. The response format does not reveal the cognitive difficulty. An item may require you to interpret a graph, identify a sound investigation, apply a biological model or choose the best instructional move. A distractor can be factually plausible but fail because it contradicts a condition in the prompt.

Read the full stem before looking for a familiar keyword. Note what the question asks: identify a mechanism, predict an outcome, evaluate evidence, or choose a teaching strategy. Then examine the options and rule them out against the given information. If an option relies on an assumption not stated, or treats a probability as certainty, it may be attractive but unsupported.

The official preparation manual provides sample selected-response questions with explanations. Study the rationale for the correct response and the alternatives, not just the answer letter. These examples demonstrate formats and ways competencies may be assessed; it cautions that performance on them should not be treated as a predictor of the actual score.

Computer-based testing

The test is delivered as a computer-administered CAT. Candidates should review the official test experience tutorial to understand how the screen and controls work. The code-specific materials include a CAT tutorial and test-taker information. The tutorial at the appointment is part of the published total time. Practicing with a random website may help with content but cannot guarantee the same navigation, display or available controls.

Before test day, review the rules and appointment confirmation. Pearson's test center instructions cover arrival and compliance. The exam page's five-hour time does not provide every check-in detail, so consult current candidate instructions for identification, arrival time and permitted items. Do not assume that a study-room calculator or personal reference sheet can be taken into the room.

Reference materials and tools

The official page for code 238 does not list an on-screen periodic table, constants page or calculator among its references in the same way some other science codes do. Do not assume a tool from Chemistry 240, Physical Science 237 or Science 236 is also provided on Life Science 238. The preparation manual and current TestView page for the exact code are controlling. If a specific tool is unclear, ask the provider before test day rather than relying on a generic TExES tutorial.

For life science, preparation should center on the published framework and its sample items. A test item may include a visual, data display or experimental description as part of selected response; that does not convert it into a constructed response. Candidates answer using the response controls and choices specified by the item.

Timing strategy for a long appointment

Practice attention in longer blocks so that the exam's appointment length feels familiar. Begin by reading for the task and constraints, then make a decision, and move on. Spending several minutes on one unfamiliar item can damage time for questions you know. If the interface allows marking for review, use it deliberately. Do not leave every uncertain answer blank with an intention to return; the final minutes can disappear quickly.

A useful pacing check is to notice progress at natural intervals, not after every question. The arithmetic average is only a rough reference because questions vary. If you are far behind, choose the best-supported answer and continue rather than trying to solve one difficult item perfectly. If you finish early, revisit marked questions, check that each response is recorded and look again for misread qualifiers such as 'best,' 'most likely' or 'based on the data.'

Do not treat the selected-response format as a reason to guess randomly. Eliminate options that violate a known mechanism or contradict the setup. In a scientific investigation question, evaluate whether the design can support the conclusion. In an instruction question, align the action with the learning objective and evidence of student understanding. A disciplined comparison often removes two distractors before you decide between the remaining options.

Original question-format example

A fictional item presents a small table of plant growth under two light conditions and asks which conclusion is supported. A candidate should compare the measured outcome and groups, then check whether other variables were controlled. If water, soil or starting size differs too, the data may show an association without isolating the light effect. The response choices might contain a strong causal claim and a narrower description of the observed pattern. Select the one the evidence supports.

Example question

Students compare seedling height after two light treatments, but one group also receives more water. What is the strongest conclusion from a difference in final height?

  1. Light alone caused the difference.
  2. The results show a difference between treatment groups, but water is a confounding factor.
  3. The study proves that all seedlings need the higher light level.
  4. The data are invalid because any experiment must use no water variation.
Answer: B. Because both light and water differ, the design does not isolate the effect of light. A careful response states what was observed and identifies the confound rather than overclaiming.

This original example illustrates reasoning in a selected-response setting. It is not copied from Pearson and does not claim to match the actual item's wording or difficulty.

Common format misunderstandings

  • The appointment is five hours, but only four hours and 45 minutes are listed for testing.
  • The exam has 100 selected-response questions, but some test questions may not count toward the score.
  • Selected response does not mean every question is a simple definition.
  • A CAT tutorial is part of the appointment; review current Pearson test experience materials beforehand.
  • Do not assume reference tools listed for another TExES science code are available on 238.
  • Pearson sample questions illustrate the format but do not predict a candidate's score.

Study and practice implications

Use Pearson's 238 preparation manual to connect sample questions to the competencies they illustrate. When you miss an item, record whether the problem was subject knowledge, an assumption, data interpretation or reading the task. Then create a fresh example and explain the answer without looking. A copied test item may make a candidate remember its surface features without understanding the science; original variations reveal whether the model transfers.

Because selected response allows comparison among alternatives, practice articulating why each distractor fails. For example, a question about genetic probability may offer the expected proportion as a guaranteed family count. A question about selection may imply that individuals mutate because they need a trait. A question about an experiment may treat correlation as causation. Naming the error sharpens discrimination and supports later teaching.

My opinion is that timing improves most when candidates reduce indecision, not when they rush every stem. The concession is that no public page provides a universal seconds-per-question requirement; the average is just a planning calculation. Use practice to find a sustainable pace and leave time to review recorded answers.

What the public format information does not tell you

The overview establishes the response mode and appointment length, but not every operational detail. It does not disclose a fixed raw-score cutoff, a scored-item count, a time limit per item or the exact mix of competencies on your test form. Avoid treating omissions as permission to invent a rule.

That distinction matters when comparing prep products. A practice set can be selected response without being a faithful simulation of code 238. Look for alignment to the current framework and thoughtful rationales. A timer may create pressure, but it does not validate an unofficial claim about real test pacing or score conversion.

The key facts

QuestionOfficial answer for code 238
Question typeSelected response
Presented count100 questions
Appointment time5 hours
Question time4 hours 45 minutes
Tutorial and agreement15 minutes
Constructed response listed?No, not on the current exact-code TestView page

A practical way to apply this topic

The distinction between total appointment time and active testing time matters when planning pacing. The five-hour appointment includes the tutorial and required agreement period, leaving four hours and forty-five minutes for the assessment. One hundred selected-response items across that interval give a planning average of just under three minutes per item, but actual item difficulty and reading demands vary. Treat that calculation as a reference, not a fixed timer for every question. Practice explaining why distractors are wrong, because the format rewards sound interpretation rather than racing to complete a fixed number of items. Reserve time to revisit flagged questions if the interface permits it, and follow on-screen directions.

A pacing average is useful only when paired with a review habit. If an item is taking unusually long, identify what information is needed, eliminate unsupported choices and decide whether to move on. Rehearse this judgment during practice rather than inventing it on test day.

Common questions

Does TExES Life Science 238 include constructed response?

The computer-administered test has 100 selected-response questions and does not list a constructed-response component. Check the exact current code page before testing.

Is the TExES 238 appointment five hours of testing?

No. Pearson lists five hours total, including 15 minutes for the CAT tutorial and compliance agreement. The testing portion is four hours and 45 minutes.

Are all 100 questions scored?

Exams may include questions evaluated for future administrations that do not affect the score, but it does not publish an exact scored versus unscored count. Treat every item seriously.