Sitonce
Country: US
Show exams for United States Hong Kong
Sign in

Electricity and Magnetism: TExES Physical Science 6-12 237

Updated 10 min read
Key takeaway

The TExES Physical Science 6-12 (237) framework covers electrostatic force, electric fields and potential, current, resistance, series and parallel circuits, magnetic fields, induction, electromagnetic waves, motors, generators and transformers.

  • Competencies 006 and 007 require candidates to connect field models with circuit behavior and practical devices.
  • Track units, directions and system boundaries when solving problems.
On this page11 sections
  1. Framework scope
  2. Charge, Coulomb force and electric field
  3. Potential difference and current
  4. Resistance and DC circuit calculations
  5. Magnetic fields, forces and induction
  6. Alternating current and electromagnetic waves
  7. Electric potential and energy per charge
  8. Series and parallel rules from conservation
  9. Use changing flux to reason about induction
  10. Measurement tools and common errors
  11. A repeatable problem-solving sequence
Framework
Domain II: Physics
Competencies
006: gravitational and electromagnetic forces; 007: electricity and magnetism applications
Core calculations
Coulomb relationships, circuit current, voltage, resistance and power
Exam tools
On-screen definitions, physical constants, periodic table and scientific calculator

Framework scope

The TExES Physical Science 6-12 framework places physics at approximately 36 percent of the test. Competency 006 includes electrostatic forces, fields and potentials; magnetic materials and fields; forces on moving charges and current-carrying conductors; induction; and electromagnetic waves. Competency 007 applies the ideas to electrostatics, current, resistance, direct-current and alternating-current circuits, electromagnets, meters, motors, generators and transformers. The official framework defines eligible outcomes; it does not promise a fixed number of questions on any one device or subtopic.

Electricity and magnetism can seem abstract because fields are not directly visible. Use diagrams, direction conventions and measurable effects to reason. A field describes how a source influences other objects at positions in space. Potential and potential difference describe energy per charge. Current describes charge flow per time. Resistance describes opposition to current under stated conditions. These related quantities have different units and roles; identify which one a question asks about before selecting a formula.

Charge, Coulomb force and electric field

Electric charge can be positive or negative. Like charges repel and opposite charges attract. Coulomb’s law relates the force magnitude between point charges to the product of their charges and the inverse square of their separation. Direction lies along the line joining the charges, with attraction or repulsion determined by signs. If the distance doubles while charges remain fixed, force magnitude becomes one quarter as large. This inverse-square relationship is a frequent conceptual check.

Electric field is force per unit positive test charge. The field direction is the direction a positive test charge would be pushed. Fields point away from a positive source charge and toward a negative source charge. To find the net field from multiple sources, add contributions as vectors. Do not add magnitudes alone if directions differ. Electric potential is a scalar; potential contributions can be added algebraically with sign, while electric field requires vector reasoning.

Worked example: A +2 μC source and a +1 μC source are separated by 0.30 m. At a point midway between them, the field contributions point in opposite directions because each positive source field points away from itself. The closer geometry is the same for both sources, but the larger charge produces the larger field magnitude. The net direction points from the stronger contribution toward the weaker side. A sign-and-arrow sketch prevents the common mistake of adding these two magnitudes as if they pointed the same way.

Potential difference and current

Potential difference is energy transferred per unit charge between two points. A battery establishes a potential difference that can drive charge motion in a complete conducting circuit. Conventional current direction is defined as the direction positive charge would flow; electron drift in a metal is opposite. In many circuit calculations, conventional current is used consistently even when electrons are the mobile carriers.

Current is the rate of charge flow and is measured in amperes, equivalent to coulombs per second. In a steady series circuit, the current is the same through each element. In a parallel network, current divides among branches and the branch currents sum to the total at a junction. These statements reflect charge conservation. A circuit diagram should be read as connected nodes and branches, not as a picture where visual left or right determines what components are in series.

Resistance and DC circuit calculations

For an ohmic resistor under specified conditions, Ohm’s law relates potential difference, current and resistance: V = IR. In series, resistances add; in parallel, the reciprocal equivalent resistance is the sum of reciprocals. A parallel equivalent is less than the smallest branch resistance. Power can be calculated from P = IV, or using equivalent forms when Ohm’s law applies. Keep track of whether the question asks for a component value or the whole network.

Worked example: A 6 Ω and a 3 Ω resistor are connected in parallel across a 12 V ideal source. Each branch has 12 V across it. Currents are 12/6 = 2 A and 12/3 = 4 A, so total current is 6 A. The equivalent resistance is 12/6 = 2 Ω, which is lower than either branch. The source power is 12 V × 6 A = 72 W. These independent checks agree with one another.

A series example uses a different pattern. With 4 Ω and 8 Ω in series across 24 V, total resistance is 12 Ω and current is 2 A throughout. Voltage drops are 8 V and 16 V, summing to the source voltage. If an answer assigns 24 V across each resistor in a series circuit, it has confused a shared voltage in parallel with series voltage division.

Magnetic fields, forces and induction

Magnetic fields are produced by magnets and moving electric charges, including electric currents. A moving charged particle experiences a magnetic force perpendicular to both its velocity and the magnetic field when those directions are not parallel. A current-carrying wire can also experience a force in a magnetic field. Direction can be determined using a consistent hand rule, but first identify the charge sign, current direction and field direction. A negative charge reverses the direction predicted for a positive charge.

Electromagnetic induction occurs when magnetic flux through a circuit changes. A changing field, changing loop area or relative motion can induce an electromotive force. Lenz’s law says the induced current’s magnetic effect opposes the change in flux that produced it. It does not simply oppose the original magnetic field in every situation. State what is changing, determine whether flux increases or decreases, then choose the induced effect that resists that change.

An electromagnet uses current in a coil to create a magnetic field. Field strength can depend on current, coil geometry and a magnetic core. A motor converts electrical input into mechanical motion through magnetic forces on current-carrying conductors. A generator uses mechanical work to produce an induced electrical effect. A transformer uses changing magnetic flux to transfer energy between coils; in the ideal model, voltage ratio follows the turns ratio while power is approximately conserved.

Alternating current and electromagnetic waves

Direct current has a consistent direction in the ideal circuit model, while alternating current periodically changes direction and magnitude. AC circuits can include resistance, capacitance and inductance. The framework asks candidates to identify basic AC characteristics and device operation; follow the official level of detail rather than assuming a deep phasor analysis is required. Distinguish peak values from root-mean-square values if a problem explicitly provides them.

Electromagnetic waves consist of coupled changing electric and magnetic fields and can propagate through vacuum. The electromagnetic spectrum spans radio waves, microwaves, infrared, visible light, ultraviolet, X-rays and gamma rays. These categories differ by frequency and wavelength, with higher frequency corresponding to shorter wavelength for waves traveling at the same speed in vacuum. The framework includes production and applications. Match a device or use to the region when that relation is relevant, and do not confuse frequency with amplitude.

Electric potential and energy per charge

Electric potential energy changes when charges move in an electric field. Potential difference is change in electric potential energy per unit charge, which gives an energy-based interpretation of voltage. A positive charge released from rest tends to move toward lower electric potential energy; a negative charge responds oppositely to the field direction. Do not infer the direction of motion from voltage alone without considering charge sign and starting conditions. Keep the field, potential, force and energy descriptions connected but distinct.

For a uniform field between ideal parallel plates, potential difference relates to field magnitude and separation. A charged particle’s change in electric potential energy is proportional to its charge and potential change. These relationships explain why a larger potential difference can transfer more energy per unit charge. When solving, write the sign of the charge and state whether the question asks for energy change or energy magnitude.

Series and parallel rules from conservation

The resistor rules follow from conservation of charge and energy. At a junction, charge does not continuously accumulate in a steady circuit, so current entering equals current leaving. Around a closed loop, the total potential rises and drops balance. In series, one path carries the same current through each component, and voltage drops add. In parallel, branches connect across the same two nodes, so they share a potential difference while current divides.

These rules are useful even when a circuit drawing is visually complex. Trace a continuous conductor to identify nodes, then compare component endpoints. Two components sharing the same pair of nodes are in parallel even if they are drawn at different heights. Components in one uninterrupted branch with no junction between them are in series. Redrawing the circuit by nodes often prevents a superficial left-to-right reading from creating the wrong equivalent resistance.

Use changing flux to reason about induction

Magnetic flux depends on magnetic-field strength, area and the angle between the field and the surface normal. A loop rotated in a field can experience changing flux even if field strength stays fixed. Faraday’s law relates induced electromotive force to the rate of flux change; faster change produces a larger magnitude under the model. Lenz’s law supplies direction. For a coil with more turns, the induced effects from each turn contribute to the total emf.

A generator illustrates the conversion chain: external mechanical work rotates a coil or magnet, changing flux and inducing electrical energy in a circuit. A motor reverses the useful direction of conversion by using electrical input to produce mechanical motion. In both cases, energy is conserved, and real devices also transfer energy to heating, sound and other forms. Avoid describing a generator as creating energy from nothing or a transformer as increasing both voltage and current without an input tradeoff.

Measurement tools and common errors

Circuit meters must be connected appropriately. An ideal ammeter is placed in series with the branch to measure current; an ideal voltmeter is placed in parallel across a component to measure potential difference. Real meters have limitations, but introductory problems may state ideal assumptions. A meter connected incorrectly can alter a circuit or produce an invalid reading. Treat a diagram and the question’s measurement goal together.

Common errors include using scalar addition for fields, reversing conventional current and electron motion, applying series rules to parallel branches, assuming a magnetic field exerts force on a stationary charge, and using a hand rule without checking sign and orientation. Another mistake is to treat voltage as charge flow. Voltage is energy per charge; current is charge per time. Units can expose a mismatch before the answer is selected.

A repeatable problem-solving sequence

For a field problem, draw sources and the point of interest, mark each vector direction, calculate magnitudes with consistent units, and add components. For a circuit, redraw nodes if needed, identify series and parallel relationships, apply conservation at junctions and loops, then check power or equivalent resistance. For induction, state the flux change before deciding induced direction. This prevents familiar formulas from being used in a context where their assumptions do not hold.

Pearson lists an on-screen periodic table, definitions and physical constants, and scientific calculator for code 237. Practice retrieving a constant only after identifying the relevant relationship. The official preparation materials provide sample selected-response questions and rationales. The worked examples here are original, not released Pearson items. Use the framework as the scope authority and record whether an error came from concept, vector direction, circuit topology, units or arithmetic.

For an ideal transformer, the ratio of secondary to primary voltage equals the ratio of secondary to primary turns. If the secondary has more turns, its voltage is higher; because input and output power are approximately equal in the ideal model, current changes in the opposite direction. Real transformers have losses, so efficiency is below 100 percent. Apply the stated idealization instead of mixing ideal equations with assumptions about real-device losses.

Electromagnetic wave questions may use the relation speed = frequency × wavelength. For a wave traveling in vacuum, speed is the speed of light, so higher frequency corresponds to shorter wavelength. When a wave enters a medium, speed and wavelength can change while frequency is set by the source. Check which property the question asks about and whether the medium changes.

When comparing magnetic materials, use the framework-level distinction among their properties and applications. A coil can strengthen a magnetic effect, while a magnetic core can alter the field. Follow the problem conditions and material rather than assuming every magnet or conductor behaves identically.

Common questions

Does a stationary charge experience magnetic force?

In the standard magnetic-force model, magnetic force on a point charge depends on its velocity. A stationary charge has no magnetic force from that relation.

What is the equivalent resistance of parallel resistors?

For ideal resistors, add the reciprocals of branch resistances and take the reciprocal. The equivalent is less than the smallest branch resistance.

What does Lenz’s law predict?

The induced current produces a magnetic effect that opposes the change in magnetic flux that caused the induction.