TExES History 7-12 233 Passing Score
Pearson lists 240 as the passing score for TExES History 7 - 12 (233).
- That is a scaled score, not a published percentage-correct threshold.
- Score reports are available at 10:00 p.m.
- Central on scheduled reporting dates.
- Use your report for the result and its diagnostic information.
On this page9 sections
- Current passing score
- 240 scaled score
- Exam code
- History 7 - 12 (233)
- Question format
- 100 selected-response questions
- Score reporting
- 10:00 p.m. Central on published score-report dates
- Raw score conversion
- Pearson’s public test page does not publish a fixed number-correct conversion
- Retake approval
- EPP candidates need approval for each attempt under TEA guidance
Pearson currently lists a passing score of 240 for TExES History 7 - 12 (233). The score is reported on a scale, and the public test page does not say that 240 means a particular percentage of questions correct. Use 240 as the official threshold and avoid converting it into “you need X out of 100” unless the testing program publishes that conversion for your administration.
What 240 means
The number 240 is a scaled passing score, not a raw count of correct responses. Selected-response tests can include items that Pearson is evaluating for future use and that do not affect a candidate’s score. Pearson’s overview notes this possibility for the exam program. The public page does not identify which items are unscored on a form or provide a raw-to-scaled conversion table for this test.
That is why a practice score of 72 out of 100 should not be treated as a guaranteed 240, and a practice score below that ratio should not be treated as a certain failure. Practice sets may differ in difficulty, coverage, and scoring. Use them to locate content or reasoning weaknesses, not to reproduce the official scaled score.
The 240 threshold tells you the score level Pearson uses to report a pass. It does not tell you how many people pass, how difficult your individual form will feel, or whether you are ready to teach. Those are separate questions. A pass-rate statistic describes a defined candidate group, while difficulty depends on the test and the candidate. The exam result is evidence about performance on this assessment.
How and when results are reported
Scores are available at 10:00 p.m. Central time on the published score-report dates. That is not the same as an immediate result on leaving the testing center. Before your appointment, check the current schedule and identify the reporting date associated with your exam. If a certification program has a deadline, ask when it needs the result and how it verifies the score.
When the report posts, use the official candidate account to view and save it. Check that the exam name, code, date, and result are correct. If you need to provide a result to an EPP or another entity, follow the program’s directions for access or transmission. A screenshot of a practice dashboard or a message saying “passed” from a commercial provider is not the same record as Pearson’s report.
A score report can include diagnostic information about performance. Use that information with your preparation notes, but do not assume a content category indicates exactly which questions you missed. The framework is organized by domains and competencies; the report’s detail supports review at the level the program supplies. A focused plan should combine the report with the actual questions and source types that challenged you during study.
How to use a score report
- Confirm the report is for History 7 - 12 (233) and the correct administration date.
- Read the overall result and any diagnostic information provided by Pearson.
- Compare performance categories with the official four-domain framework without assuming a precise item count.
- If you passed, ask your EPP what certification step comes next and verify that it has received the official result.
- If you did not pass, request the EPP approval required for a later attempt and build a study plan from the weaker areas and your error log.
- Save the report securely with your certification records and use official support if a score or identity detail appears incorrect.
Do not treat a borderline practice result as a forecast. A diagnostic is a sample of the knowledge and reasoning that the author chose to test. Its most useful output is not a prediction but a short list of actions: revisit a Texas period, distinguish primary and secondary sources, review constitutional documents, or practice teaching and assessment scenarios.
Passing score versus pass rate
A passing score answers, “What score does the program identify as passing?” A pass rate answers, “What share of a defined group passed during a specified period?” They are not interchangeable. The 240 figure is the threshold. A pass rate needs a date range, population, and denominator to mean anything. The current 233 TestView page reviewed here publishes the threshold and does not include a current pass-rate series.
Be wary of a percentage from an old technical report. The candidate pool may have been small, the reporting period may be several years old, or the group may not match current first-time test takers. A historical result cannot show what you personally will score. If an official annual report is used elsewhere, record the test code, year, number of examinees, and whether the measure counts all attempts or a defined subgroup.
The same caution applies to comparison claims. A higher average scaled score in a technical report does not automatically mean one exam is easier; groups can differ in size, preparation, retake status, and selection. Keep comparisons descriptive and sourced. For your own plan, focus on the current framework and your evidence of mastery.
What if you did not reach 240?
A non-passing report is a result for one administration, not a permanent judgment about your ability to teach history. Give yourself a short reset, then translate the diagnostic feedback into specific practice. If World History was weak, identify the relevant periods and connections. If U.S. or Texas content was strong but source questions were difficult, work on context, corroboration, and claims. Repeating the entire study routine unchanged is unlikely to address a specific gap.
TEA says EPP candidates are approved for one exam attempt at a time and must request approval for each retake. Check Pearson’s current retake and registration policies before selecting a new date. Waiting periods, authorization, and any fee should be confirmed through the official sources. Do not use a forum post to infer how many attempts remain under the rules for your route.
If you believe there is an error in a report or a test administration, follow Pearson’s official score-review or testing concern procedure within the applicable deadline. Keep the appointment confirmation and report. Do not assume that asking for a review pauses a certification deadline; ask the provider and EPP directly.
Preparing for a scaled score
Because a raw cutoff is not published on the page, prepare for the competencies rather than a target percentage on an unofficial quiz. The official framework weights U.S. History at approximately 36%, World History at 30%, Texas History at 20%, and Foundations, Skills, Research and Instruction at 14%. Use those proportions to allocate attention, then adjust for your own weaknesses.
The official sample questions include explanations that help reveal the reasoning the item tests. For each practice item, explain why the best answer is better than the alternatives. If you chose correctly by elimination but could not explain why, record it as uncertain. A student who can retrieve the content, evaluate evidence, and reject an unsupported inference is better prepared than someone who merely reaches a high score on memorized items.
Mix timed and untimed work. Untimed review helps you understand historical context and rationale. Timed sets help you make those judgments within the 4-hour-45-minute testing block. Afterward, look for a recurring source of mistakes. One error may be random; a pattern such as confusing chronology or treating a source as neutral calls for targeted practice.
A pass score is a necessary exam benchmark, not the only measure of preparedness as a teacher. The framework also covers using TEKS, selecting instruction, and assessing student learning. Practice those competencies by explaining how an activity will reveal student understanding, not simply by naming a memorable classroom project.
Why scaled scores are reported
A scaled score expresses performance on the program’s reporting scale. It is designed to communicate a result against the established passing standard, while a raw count is simply how many items a candidate answered correctly on one test form. The test provider controls the scaling and reports the official score. Candidates should use the scale the way the program explains it rather than reverse-engineering it from practice questions.
Two practice quizzes can each have 100 questions and still be unlike the official exam. They may sample different competencies, use different reading loads, or have answer choices of different quality. Even if a commercial publisher labels its set as a full-length practice test, its percentage is a local measure. It can show improvement on that material but cannot promise an official scaled result.
The five-hour appointment also includes tutorial time, so do not divide the total appointment by the number of questions and call that the exam pace. Pearson specifies 4 hours 45 minutes for testing. A simple average across the testing block can help you recognize when you are stuck, but the exam does not publish a per-item time allowance. Practice adapting to short recall prompts and longer evidence tasks.
Do not mistake confidence for a score prediction
Some candidates finish feeling uncertain because history items can present unfamiliar evidence or ask for a careful comparison. Others feel confident because familiar vocabulary appears in many options. Neither feeling establishes whether the reported scale reaches 240. During the exam, focus on the next decision: identify the question, use relevant evidence, select the best answer, and continue.
Afterward, avoid estimating your result by remembering a few hard questions. A difficult item can be experimental, scored, or simply challenging to you; the candidate is not told which. Likewise, a question that felt easy may still be one of many scored items. Wait for the official report rather than sharing a speculative raw score as though it were a result.
If your EPP or employer needs evidence by a deadline, plan around the published reporting schedule before booking. Ask how the result is transferred and how long internal processing takes. If an account does not show a result when expected, use Pearson’s support channel and tell the program that you are checking. A delay in display is not itself evidence of pass or fail.
Three separate numbers candidates often confuse
| Number | What it describes | What it cannot tell you by itself |
|---|---|---|
| 240 | Pearson’s listed passing scaled score for 233 | A fixed number of correct responses |
| A practice-set percentage | Performance on that provider’s selected questions | Your official score or certain pass/fail result |
| An annual pass-rate percentage | The share of a defined candidate group passing in a defined reporting period | An individual candidate’s probability of passing |
Keeping these measures separate avoids two bad decisions. A high practice percentage should not make you skip review of a weak domain, and a single low score should not convince you that success is impossible. Use each number for the question it answers: threshold, diagnostic performance, or group trend.
If you need a report for a licensing or hiring file, check whether the receiving office accepts an electronic result or wants a separate document. Pearson’s score page and TEA certification steps are not the same system. Confirm receipt with the organization that needs the record instead of assuming that a score automatically updates every account.
Read the report instructions while they are current; later applications may ask for a particular score record or candidate identifier. Save a copy in a secure location for future reference.
That record can make the next certification step simpler.