Sitonce
Country: US
Show exams for United States Hong Kong
Sign in

TExES Science 4-8 116 Master Guide 2026

Updated 15 min read
Key takeaway

TExES Science 4-8 (116) is a computer-administered Texas educator certification exam with 100 selected-response questions and a five-hour appointment.

  • The listed fee is $116, the passing score is 240 on a scaled-score scale, and the framework spans inquiry, physical science, life science, Earth and space science, and science instruction.
On this page12 sections
  1. Who takes the exam
  2. Registration, appointments and locations
  3. Cost and fee questions
  4. Format, time and the supplied reference
  5. Framework and topic weighting
  6. Scoring and what a 240 means
  7. Is the exam difficult, and how long should you study
  8. A study sequence that follows the framework
  9. Original worked example: net force
  10. Official resources and practice
  11. Results, retakes and certification after a pass
  12. A simple readiness check

The TExES Science 4-8 exam evaluates content and teaching-related knowledge for an entry-level Texas public-school science educator in grades 4 through 8. Its current code is 116. The code matters: nearby Texas exams may serve different grade spans, certification routes, or candidate purposes. Before studying, compare your assignment and approved certification route with the current TEA requirements and the exact Pearson TestView page for Science 4-8 (116).

Exam code
116
Question format
100 selected-response questions on a computer-administered test
Appointment
5 hours total, including 15 minutes for tutorial and compliance agreement; 4 hours 45 minutes testing time
Passing score
240 scaled score
Listed fee
$116; additional fees may apply
Booking
By appointment year-round, subject to availability
On-screen reference
Periodic table

The five-hour figure describes the total appointment. Pearson lists 15 minutes for the computer tutorial and compliance agreement, followed by 4 hours and 45 minutes of testing time. The exam is not a five-hour block of science questions. Read the live appointment and confirmation details when registering because the testing vendor controls current site availability and scheduling terms.

Who takes the exam

Candidates pursuing Texas certification in Science 4-8 may need this content examination, but the test is one step in a larger certification pathway. Texas Education Agency guidance says candidates must have test approval before registering for a Texas Educator Certification Examination Program exam. Candidates in an educator preparation program should coordinate with that program about approval and required steps. A person who already holds a Texas classroom teaching certificate and meets the agency conditions may have an additional-certification-by-exam route. Out-of-state and out-of-country educators need a review of credentials for testing approval.

Do not infer your route from the exam title alone. Requirements can depend on whether you are seeking initial certification, adding an area, transferring credentials, or testing in another permitted category. Ask your approved educator preparation program or TEA which content exam is required for your certificate and whether a separate pedagogy examination, coursework, clinical experience, application, background review, or other step applies. Passing 116 by itself is not a teaching certificate.

Registration, appointments and locations

Start with eligibility and approval, then use the exam registration page to create or access the testing account and select Science 4-8 (116). Pearson lists appointments year-round at computer-based testing sites in Texas and nationwide. Year-round testing means candidates can search for available appointments throughout the year; it does not guarantee an open seat on a preferred day, at a particular site, or near a deadline. Appointments are first-come, first-served, so search early once your authorization is active.

The exam does not use a single annual testing window in the way a paper-based test might. Your practical date depends on approval, open seats, the vendor's registration rules, and your own preparation. Before paying, confirm the exact test code and name, date, location, cancellation or rescheduling rules, identification requirements, and the total shown at checkout. Keep the confirmation. If a program deadline or certificate timeline is involved, leave room for score reporting and any required follow-up rather than booking the last possible day.

The official page provides a test-center locator and current appointment search. Those tools are more reliable for local availability than an old list copied into a study guide. A location can offer fewer dates than another site, and a seat can disappear while you are comparing. Treat a displayed date as available only when the registration system lets you reserve it and returns a confirmation.

Cost and fee questions

Pearson currently lists an exam fee of $116 and cautions that additional fees may apply. Use the payment page for the amount charged to your account. Total certification cost is a separate calculation: it may include preparation-program tuition, required coursework, application charges, fingerprinting, other required examinations, and travel or rescheduling costs, depending on the candidate's route. This master guide does not combine those variable expenses into a made-up universal total.

Texas has published fee-waiver and reimbursement programs for certain candidates and certification areas. Those programs have eligibility conditions, dates, and scope. Do not assume a waiver for another subject applies to Science 4-8. Check current TEA guidance and the registration system using your own certification route before budgeting. If your program, district, or employer offers reimbursement, ask which expense is covered, who receives the payment, and what documentation or completion condition applies.

Format, time and the supplied reference

Science 4-8 (116) is a computer-administered test with 100 selected-response questions. Exams may include items being evaluated for future administrations that do not count toward the score. The public page does not state how many items, if any, in a particular sitting are unscored. Do not subtract an assumed number from 100 or try to identify experimental items during the exam.

A periodic table is provided on screen. Practice reading the supplied reference rather than assuming you can bring a printed copy. The official page and preparation manual should be checked for any additional tool or reference information. A table may help with element symbols and atomic data, but it does not replace understanding how to interpret formulas, compare atoms and ions, or reason through a reaction.

Selected-response does not mean that every item is a quick recall question. A prompt can describe an investigation, show a graph, set up a classroom decision, or ask you to interpret a model before selecting the best answer. Build the habit of identifying what the stem asks, which evidence matters, and why each distractor fails. Practicing with a timer can help you notice whether calculations or long stems are consuming disproportionate attention, but a private practice score cannot predict an official scaled score.

Framework and topic weighting

The official framework organizes the test into five domains. The first four cover scientific inquiry and processes, physical science, life science, and Earth and space science. The fifth covers science learning, instruction, and assessment. Pearson lists approximate percentages of 22 percent for each of the first four domains and 13 percent for the fifth. The page explicitly says the percentages do not total 100 because of rounding. They are planning guidance, not a promise of an exact question count for your administration.

DomainApproximate weightingStudy focus
I. Scientific Inquiry and Processes22%Safety, tools, measurement, investigation design, evidence, models, scientific reasoning, and science in personal and societal decisions
II. Physical Science22%Forces and motion; physical and chemical properties and changes; atoms, mixtures, bonds, reactions; energy, electricity, magnetism, light, sound, and waves
III. Life Science22%Cells and organisms, heredity, biological processes, interactions, populations, and change in living systems
IV. Earth and Space Science22%Earth materials and processes, systems, weather and climate, space systems, geologic history, and evidence about Earth
V. Science Learning, Instruction and Assessment13%How students learn science, inquiry-centered instruction, safety and inclusion, misconceptions, sequencing, and formative and summative assessment

Use the detailed competency statements, not only the five domain labels, to decide what to learn. A competency tells you the broad knowledge or skill; descriptive statements break it into eligible content. Convert each statement into something observable: define a concept, interpret a representation, solve a problem, identify a suitable investigation, or select an instructional response. That makes a wide outline more manageable than rereading the domain headings and hoping familiarity becomes recall.

A sensible first pass is to annotate each competency as secure, partly secure, or unfamiliar, with one piece of evidence for each judgment. For example, 'I can explain why this graph supports the conclusion' is stronger evidence than 'I remember this topic from college.' Mark weak areas by the actual skill involved. You may know the vocabulary of force but still struggle to draw a force model; you may know cell structures but confuse a structure's function; you may recognize formative assessment but choose a task that cannot answer the teacher's question.

Scoring and what a 240 means

The listed passing score is 240. It is a scaled score, not a published instruction to earn 240 raw points or answer a fixed percentage correctly. The public materials do not provide a universal conversion from number correct to scaled score for a particular test form. For that reason, avoid claims such as 'you need exactly 70 percent' unless the testing program explicitly defines that rule for this exam. Neither a third-party quiz percentage nor an estimate based on the domain weights can be translated reliably into the official score.

Pearson reports scores at 10:00 p.m. Central time on its published score-report dates. Check the current calendar and your account because a test date does not necessarily mean an immediate result. Keep your candidate record and share results with the educator preparation program or certification authority when instructed. A passing result establishes the examination outcome; the state or program still determines whether every requirement for the certificate has been met.

The framework percentages also do not reveal the raw scoring method. A test form may contain questions that do not count, and scaled scoring is designed to report performance on a common scale. A good preparation goal is therefore broad competency, not trying to reverse-engineer the number of correct answers from a guessed denominator. Focus on content and reasoning that transfer across versions.

Is the exam difficult, and how long should you study

There is no reliable single difficulty rating for every candidate. Someone who recently studied biology and chemistry may find different gaps from an experienced middle-school teacher who has not used physics recently. The breadth is a real challenge: four science content domains sit beside investigation skills and decisions about instruction and assessment. The fifth domain is smaller by its listed approximate share, but it is not filler. A candidate who only reviews college science content can miss questions about student thinking, safe inquiry, and choosing evidence of learning.

I would not plan by counting how many times you can reread the manual. Plan around retrieval and transfer. Can you explain a concept without looking, work an unfamiliar example, interpret a diagram or data table, and identify a common misconception? If not, another passive reread may feel productive without fixing the gap. Use short, closed-book attempts, then check the framework or a trusted teaching source and explain the correction in your own words.

The cited exam information does not establish a current, representative pass-rate figure for Science 4-8 (116). That is a limit on what can be stated, not evidence that the exam is unusually easy or unusually hard. Be cautious with prep-provider claims that present a rate without a date, denominator, candidate population, and source. Your own diagnostic across all five domains is more useful for scheduling study time than an unsupported national average.

Set a study horizon after completing that diagnostic. A candidate with strong recent science knowledge may need more time for targeted practice and the teaching domain; a candidate returning to chemistry, physics, or Earth science after several years may need a longer content rebuild. Reserve sessions for review and timed mixed practice. Leave room to revisit missed concepts after a delay, because immediately repeating a corrected question can overstate retention.

A study sequence that follows the framework

Begin by downloading or opening the official preparation manual from the 116 preparation-materials page. Read the framework and study-plan worksheet before choosing a commercial resource. Then take a short diagnostic made from original questions or carefully selected review prompts across every domain. Do not treat the official sample questions as a prediction of your score. Pearson itself says sample performance should not be viewed as a predictor; use those items to understand format, competency mapping, correct responses, and rationales.

Next, repair content in connected groups. For physical science, connect particle models to properties and changes in matter, then connect reactions to conservation of matter and energy. For life science, move from cell structures and processes to organisms and systems, then to populations and ecological relationships. For Earth and space science, practice explaining processes across scales and using evidence to support an inference. Keep a running list of terms you confuse, but pair each term with an example or representation so the list does not become a vocabulary-only study plan.

Study inquiry throughout, rather than leaving it for the end. Every time you review a science topic, ask what a learner could observe or measure, what evidence would support a claim, what alternative explanation might fit, and what limitations affect the conclusion. For Domain V, work from a classroom decision: identify what students currently understand, choose an inclusive activity that can reveal their reasoning, and select an assessment that informs the next instructional move. This links pedagogical knowledge to the science content it supports.

Finish with mixed practice and error analysis. Classify each missed item: content gap, misread stem, calculation or unit error, evidence mismatch, or teaching decision. Write one sentence that explains why the correct option fits and why your chosen distractor does not. Revisit that idea in a different form several days later. The official CAT tutorial can also familiarize you with the computer testing experience. That is useful for reducing interface friction, but it does not replace studying science.

Original worked example: net force

A cart of mass 6 kilograms is pulled right with a force of 26 newtons while friction acts left with a force of 8 newtons. What is its acceleration, assuming those are the only horizontal forces? First define the system as the cart and choose right as positive. The net horizontal force is 26 minus 8, or 18 newtons to the right. Newton's second law gives acceleration equal to net force divided by mass: 18 divided by 6 equals 3 meters per second squared to the right.

Why not use 26 newtons alone? Because the question asks for the combined effect of the forces, and friction opposes the pull. Why is the answer not 3 newtons? The calculation divides force by mass, and newtons per kilogram are equivalent to meters per second squared. The units help catch a conceptual slip. If the cart were instead moving to the right at constant speed, that motion alone would not establish a rightward net force; constant velocity corresponds to zero net force in the idealized model.

This example is newly written for this guide and is not an official Pearson item. The official framework includes force and motion; the example illustrates one reasoning route, not the full range of possible questions. For each equation you practice, state assumptions, choose a system, track direction, and check units. Those habits are useful beyond memorizing formulas.

Official resources and practice

The Pearson preparation page links the exam framework and preparation manual, sample selected-response questions with explanations, a planning worksheet, and test-experience tutorials. Start there. Read the competency attached to an official sample item before analyzing it, then use its rationale to see what the item is assessing. Do not copy the question into a public quiz or treat the sample set as a complete question bank. It demonstrates format and selected examples, not every possible item or a guaranteed blueprint-by-blueprint rehearsal.

Use outside learning resources to close a specific gap. An introductory physics text can help rebuild force, energy, or circuits; a biology text can revisit cells or heredity; a trustworthy Earth science source can clarify plate processes. Check that the explanation matches the framework and the grade-band level of the exam. More advanced detail is not automatically better. A concise explanation that lets you interpret a new example is often more useful than memorizing specialist vocabulary the framework does not call for.

A good practice set includes explanations for the right answer and the distractors, balanced coverage, and original questions. A self-score is a study signal only. It is not an official scaled score, pass probability, or substitute for the program's current requirements. If you use a commercial course, verify the exact exam code and inspect how it covers science teaching, assessment, inquiry, and the full content outline before relying on it.

Results, retakes and certification after a pass

Check Pearson's current score-report calendar for the date attached to your appointment. If you do not pass, read the result information and contact your educator preparation program or TEA as appropriate before registering again. TEA says an EPP candidate must request approval each time they want to retake an exam; approval is issued for one attempt at a time. Do not assume you can book another attempt immediately or that a previous authorization remains active.

Use the score report and your own notes to diagnose the next preparation cycle. Return to the framework, identify the competencies that need attention, and create new practice around the underlying idea instead of memorizing the missed prompt. Confirm current retake limits, waiting periods, fee treatment, registration steps, and approval rules with the testing program. These are operational requirements and can change; rely on the current official policies at the point you act.

After a passing score, complete the rest of your certification checklist. Depending on your route, the state may still require an approved educator preparation program, coursework, pedagogy testing, an application, fingerprinting, or other action. Ask your program or use TEA's current certification guidance to verify what remains. The exam measures a defined set of knowledge and skills; it does not itself issue a certificate or guarantee a job.

A simple readiness check

Before test day, make sure you can do more than recognize the domain names. Can you explain the difference between a physical and chemical change with evidence? Interpret force, energy, or matter models? Connect an organism's structure and function? Explain an Earth process with a defensible causal chain? Choose an investigation that distinguishes competing explanations? Identify what an assessment response would tell a teacher and what to do next? If several answers are no, the framework gives you a map for the remaining study.

Also confirm practical readiness: the approved exam code, current authorization, appointment details, score-report date, payment terms, and the instructions supplied by the testing vendor. Use Pearson's CAT tutorial if the computer format is unfamiliar. A calm routine will not replace content knowledge, but avoidable confusion about the exam account or schedule can take attention away from the work you have done.

The most defensible plan is straightforward: follow the exact 116 framework, find gaps with evidence, learn concepts well enough to transfer them, and practice explaining your reasoning. Keep official policies separate from study advice. That lets you prepare for the assessment without confusing an unofficial quiz score, a rounded domain estimate, or a study-provider promise with a Texas certification decision.

Common questions

How many questions are on TExES Science 4-8 (116)?

The exam has 100 selected-response questions on the computer-administered test. The exam may contain items evaluated for future administrations that do not affect the score; the public page does not say how many.

How long is the TExES Science 4-8 exam?

The appointment is five hours total. Pearson allocates 15 minutes for the tutorial and compliance agreement and 4 hours 45 minutes for testing.

What is the passing score for TExES Science 4-8 (116)?

The listed passing score is 240 on the scaled-score scale. Do not convert that to a raw percent correct unless the testing program publishes a valid conversion.

Can I take TExES Science 4-8 any time of year?

Exam arrangements include year-round appointments, subject to first-come, first-served seat availability at testing centers in Texas and nationwide.

Does passing 116 certify me as a Texas science teacher?

No. It is an exam result. TEA and your educator preparation program determine which additional preparation, tests, application, and certification steps apply to your route.