Praxis Elementary Education Fundamentals: Mathematics 8003 Sample Questions and Answers
Use the ETS Study Companion for official 8003 sample questions and format guidance.
- Independent practice examples can help you explain the math and evaluate student reasoning, but they do not reproduce the full test or predict an official scaled score.
On this page37 sections
- How to work original questions
- Place value example
- Fraction division example
- Percent example
- Linear relation example
- Geometry and measurement example
- Quick reference
- Original worked numeric-entry question
- Understand what the item is asking
- Check alternate response choices
- Type numeric answers with scale in mind
- Turn every worked answer into a new example
- Use explanations for integrated tasks
- Respect the test blueprint when practicing
- Use a worked solution format
- Keep practice original and secure
- Start by representing the problem
- Use a reasonableness check
- Explain distractors
- Distinguish exact answer and rounding
- Use category coverage
- Understand the original examples
- Practice under separate clocks
- Read all conditions before setting up
- Use more than one check
- Change one feature to test transfer
- Use original practice responsibly
- Explain why an answer fits
- Worked example: compare unit rates
- Worked example: solve a linear context
- Worked example: interpret a data outlier
- Explain the setup as well as the result
- Original rate comparison
- Original measurement conversion
- Original multi-step measurement example
- Original ratio example with a fixed amount
- Original example: compare two plans
How to work original questions
These examples are original and are not ETS questions. Identify the quantity, representation and constraints first. For numeric entry, verify the requested form and units.
After solving, explain why a tempting alternative uses the wrong operation or ignores a condition.
Place value example
In 4,206.35, the 2 represents 200, the 3 represents 0.3, and the 5 represents 0.05. The 2 in the hundreds place is 10,000 times the 2 in the hundredths place because 200 divided by 0.02 equals 10,000.
A place-value model helps distinguish a digit from its value. Moving one place left multiplies the value by ten; moving right divides it by ten.
Fraction division example
A ribbon is 9/10 meter long. How many pieces of 3/20 meter can be cut? Compute (9/10) ÷ (3/20) = (9/10)(20/3) = 6 pieces, assuming no waste and exact lengths.
Multiplying 9/10 by 3/20 answers a different question. Check the result by multiplying six pieces by 3/20.
Percent example
A price changes from $80 to $92. The increase is $12; relative to the original $80, the percent increase is 12/80 = 15%.
A change from 40% to 50% is 10 percentage points and a 25% relative increase from 40. State which comparison the prompt asks for.
Linear relation example
A club charges $12 to join plus $4 per meeting. With n meetings, total cost is C = 12 + 4n. The constant 12 is the starting value; 4 is the rate of change per meeting.
For five meetings, C = 32. Check that a table and graph show the same relationship.
Geometry and measurement example
A rectangle measuring 7 m by 11 m has perimeter 36 m and area 77 square meters. Doubling both dimensions gives perimeter 72 m and area 308 square meters. Perimeter doubles; area quadruples.
Keep meters and square meters distinct. A length scale factor applies differently to area.
Quick reference
| Current 8003 fact | Detail |
|---|---|
| Presented questions | 68 |
| Format | Selected response and numeric entry |
| Full-test timing | 100 minutes |
| Calculator | On-screen scientific calculator |
Original worked numeric-entry question
A rectangle has length 8 units and width 5 units. If both dimensions are doubled, what is the new area?
- A. 40 square units
- B. 80 square units
- C. 160 square units
- D. 26 square units
Understand what the item is asking
Before calculating, underline the unknown and its unit. A question asking how many groups differs from one asking how many objects per group. For a percent question, identify the original, change and new value. For a geometry task, identify the measure requested. This short setup prevents a familiar arithmetic operation from answering the wrong question.
Check alternate response choices
In a selected-response item, a distractor often reflects a recognizable error: reversing a ratio, using the ending value as the percent base, omitting a unit conversion or applying a right-triangle theorem to another shape. Explain why each tempting choice fails. For multi-select items, evaluate every option independently rather than stopping after finding one true statement.
Type numeric answers with scale in mind
Estimate the answer before entering it. If the prompt asks for a number of groups, determine whether a remainder means another whole group; if it asks for a measure, use the requested unit. Read the actual on-screen format instruction because accepted decimals, rounding or unit entry can depend on the test interface.
Turn every worked answer into a new example
After solving a fraction question, change the values and preserve the relationship. After a percent increase, reverse it into a decrease question. After a geometry calculation, change the unknown side. Transfer practice checks whether the method is understood rather than memorized from one solution.
Use explanations for integrated tasks
A teaching-task answer should identify the learner's thinking and evaluate it mathematically. For example, if a student treats 0.4 as less than 0.35, compare hundredths: 40 is greater than 35. Then select a place-value chart or number line that directly addresses decimal magnitude.
Respect the test blueprint when practicing
The number category is largest, but algebra and geometry/data each carry about 29 percent. Include all three in a mixed set and add teaching-task reasoning. The published weights are approximate and do not reveal which presented questions count, so sample practice should not imitate an assumed score distribution.
Use a worked solution format
Write the known values, the relationship, the computation, the unit and a reasonableness check. For a linear problem, interpret slope and intercept. For volume, show all three dimensions. For data, sort values before identifying a median. This structure makes errors easier to locate and explanation easier to follow.
Keep practice original and secure
Examples in this article are newly written for learning and are not copied ETS items. Do not reproduce remembered secure test questions. Practice the concepts and representations in the companion outline while protecting testing integrity.
Start by representing the problem
Draw a number line for magnitude, a table for paired quantities, an equation for equality or a labeled figure for geometry. Choose the representation that reveals the relationship. A representation should support the reasoning, not decorate the page. Check that units and labels correspond to the problem.
Use a reasonableness check
Estimate before exact calculation. For a percent, benchmark 10%, 25% or 50%; for area, compare with a bounding rectangle; for a linear model, test a nearby point. If exact work differs substantially from the estimate, review the setup and unit.
Explain distractors
A useful solution explains why a tempting alternative is wrong. For a percent change, show why dividing by the new value changes the reference; for a right triangle, show why the right-angle condition matters. This supports deeper review and the exam's integrated reasoning tasks.
Distinguish exact answer and rounding
Check whether the prompt asks for a whole number, fraction, decimal or rounded measurement. Keep exact values until the final step. For a number of containers, a nonzero remainder may require rounding up, whereas a length can remain fractional. Context determines the proper treatment.
Use category coverage
Practice examples from all three domains and include an instructional reasoning item. The weights are approximate, so a small sample should not mimic an assumed exact exam mix. Include numeric entry and selected response as documented.
Understand the original examples
The worked problems in this guide are original practice, not ETS questions. They demonstrate method and common reasoning checks. Use the current ETS Study Companion for official examples and directions, then use new examples to test transfer.
Practice under separate clocks
After learning a method, use the current category durations. Keep a record of difficult items and revisit them untimed. If speed causes errors, strengthen the method before repeating a full rehearsal.
Read all conditions before setting up
Check words that define units, bounds, equal groups, right angles or rounding. These can change the mathematical model. Underline the unknown and write its unit before calculating.
Use more than one check
Estimate magnitude, substitute a solution into an equation or interpret the result in the story. Independent checks catch different error types.
Change one feature to test transfer
After solving a worked problem, change the unit, number or requested quantity and solve again. If the method changes, explain which feature caused the change.
Use original practice responsibly
The examples here are original teaching examples and not ETS items. Use secure official samples for format orientation and these problems for concept practice.
Explain why an answer fits
State the relationship, calculation, unit and contextual meaning. This makes a response useful for reviewing both reasoning and calculation.
Worked example: compare unit rates
A 6-ounce snack costs $2.10 and a 10-ounce snack costs $3.20. The unit prices are $0.35 and $0.32 per ounce. The larger pack is cheaper per ounce. Divide price by ounces and include the same unit in each rate. Comparing total prices alone would favor the smaller package but would not answer the value question.
Worked example: solve a linear context
A club has $25 and adds $8 each week. After w weeks, balance B=25+8w. At week 6, the balance is $73. The slope is dollars per week and the intercept is the starting balance. If the question asks when the balance reaches $65, solve 25+8w=65 to get five weeks and verify.
Worked example: interpret a data outlier
For 8, 9, 9, 10 and 34, the median is 9 and mean is 14. The outlier pulls the mean upward. If 34 is removed, the mean is 9 and median remains 9. The range also changes from 26 to 2. Explain which statistic the prompt asks for rather than selecting a measure from habit.
Explain the setup as well as the result
Each original item should be reviewed for the model, operation, unit and reasonableness. If a result is wrong, change one part of the context and solve again. This isolates whether the gap concerns reading, calculation or selecting a relationship.
Original rate comparison
A cyclist travels 18 miles in 1.5 hours. The unit rate is 12 miles per hour. Another cyclist travels 25 miles in 2 hours, or 12.5 miles per hour. The second rate is faster even though the first trip's total distance may look competitive. Convert both to a common unit rate before comparison and state the unit.
Original measurement conversion
A rectangle measures 150 centimeters by 80 centimeters. In meters the dimensions are 1.5 and 0.8, so area is 1.2 square meters. Multiplying 150 by 80 gives 12,000 square centimeters, equivalent to 1.2 square meters because 10,000 square centimeters equal one square meter. This checks both conversion and area units.
Original multi-step measurement example
A rectangular garden is 2.4 meters long and 150 centimeters wide. Convert 150 centimeters to 1.5 meters, then find area 2.4 × 1.5 = 3.6 square meters. If instead the question asks for border fencing, perimeter is 2(2.4+1.5)=7.8 meters. The same dimensions support two different measures. Units distinguish them and reveal which calculation answers the prompt.
Original ratio example with a fixed amount
A fundraiser starts with $20 in a donation jar and receives $5 per event. After e events, total is T=20+5e. This is linear but not proportional. After 4 events, T=$40. The ratio T/e is not constant because the initial $20 changes the average. A question about the additional amount per event asks for the slope; a question about the starting balance asks for the intercept.
Original example: compare two plans
Plan A charges $10 plus $4 per month; Plan B charges $6 plus $5 per month. Write A=10+4m and B=6+5m. Set them equal: 10+4m=6+5m, so m=4. At four months each costs $26. Before four months Plan B is cheaper, while after four months Plan A is cheaper. The intersection has a contextual meaning and both equations are linear with nonzero intercepts. Checking m=4 in both confirms the calculation.
Common questions
Are these official ETS questions?
Only items identified as ETS samples are official. Use the Study Companion for those.
Can this set predict my score?
No. It is practice, not a validated scaled-score predictor.
How should I review a wrong answer?
Explain the underlying math, check the units, and try a changed example.