Sitonce
Country: US
Show exams for United States Hong Kong
Sign in

Praxis Core Academic Skills For Educators: Mathematics 5733 Format and Timing

Updated 10 min read
Key takeaway

Praxis Core Mathematics 5733 is computer delivered, with 56 questions in 90 minutes.

  • ETS identifies selected-response and numeric-entry questions.
  • The exact scored and pretest split is not published.
  • Practice both choosing an answer and entering a calculated value, while following each item’s instructions.
On this page15 sections
  1. What the current 5733 format includes
  2. What the average pace means
  3. Selected response: evaluate the choices
  4. Numeric entry: calculate and enter deliberately
  5. Read data displays before calculating
  6. Use units as a reasoning check
  7. Manage uncertainty without losing time
  8. Scored and pretest items
  9. A practice routine for this format
  10. Format questions candidates often ask
  11. What to verify before test day
  12. Use estimation before numeric entry
  13. Treat instructions as part of the problem
  14. Check the units at the end
  15. Finish with a direction and scale check

What the current 5733 format includes

The code-matched ETS Study Companion describes Praxis Core Academic Skills for Educators: Mathematics (5733) as a computer-delivered test with 56 questions and 90 minutes of answering time. ETS identifies selected-response items and numeric-entry items. That combination matters: some questions ask you to evaluate alternatives, while others require you to calculate and enter a value directly.

Questions administered
56
Answering time
90 minutes
Delivery
Computer delivered
Response types
Selected response and numeric entry
Scored and pretest split
Exact number not published
Pass standard
Set by the requiring authority

Do not transfer a format description from another Praxis code. Some general Praxis materials describe other response modes, but the 5733-specific product page and companion are the sources for this test’s stated formats. Follow the directions attached to the item in front of you. Do not assume every selected-response question asks for exactly one choice unless its instructions say so.

What the average pace means

Ninety minutes divided by 56 questions gives about 1.61 minutes per question, or roughly 96 seconds. This is only a whole-test average. A short arithmetic item may take much less; a multi-step data or geometry problem may take longer. Treat the average as a checkpoint, not a command to stop a calculation at a fixed second.

During practice, note the time spent on each kind of task: reading a word problem, setting up an equation, carrying out arithmetic and entering the answer. If most time disappears before you choose a method, work on translating language into a model. If the setup is quick but arithmetic drags, practice efficient operations and checking strategies. Different causes need different remedies.

A reasonable timed practice run can use sections of 14 questions in about 22 to 23 minutes, followed by a brief review. Three such blocks approximate 42 questions and 66 to 69 minutes, leaving time for the remaining items and review. This is a practice structure, not an official ETS section schedule. Actual items may be mixed and the test need not divide evenly by topic.

Selected response: evaluate the choices

For a selected-response item, read the complete instruction before looking for a familiar formula. Underline mentally what the question asks for: a value, an equivalent expression, an estimate, a probability or a conclusion from data. Then solve enough of the problem to compare each option with your result. A distractor can reflect a common error such as using the wrong denominator or reversing an inequality.

Suppose a class has 18 students, and 12 submitted an assignment on time. If the question asks for the fraction who were late, calculate the complement: 18 minus 12 equals 6, so the fraction late is 6/18=1/3. An attractive distractor may be 12/18, which is the fraction on time. Reading the target group carefully matters as much as simplifying.

If an item allows more than one selection, test each option independently against the stated condition. Do not select a choice simply because it is true in general. It must answer the actual question. After selecting, check whether the instruction requests all applicable options or a specified number. The item directions govern the response.

Numeric entry: calculate and enter deliberately

A numeric-entry item removes the answer choices. Show the calculation mentally or on the permitted workspace, keep units attached and enter only what the prompt requests. If it asks for a decimal to the nearest tenth, do not enter a fraction unless accepted by the interface. If it asks for an exact fraction, do not round prematurely.

For example, if a rectangle has length 7.5 units and width 4 units, its area is 7.5 times 4, or 30 square units. If the question requests a numerical value, enter 30 in the requested format. The unit “square units” describes the quantity, but the response box may request only a number. Check the instruction before adding symbols.

Numeric entry makes estimation and substitution useful. For an answer near 30, a result of 300 or 3 should trigger a place-value check. For an equation, substitute the proposed solution back into the original expression. For a percent, estimate whether the result should be smaller or larger than the whole. These checks catch entry and arithmetic errors without requiring a second full solution.

Read data displays before calculating

Data questions reward careful reading of titles, labels, units and time periods. A table may report percentages, counts, averages or rates, which are not interchangeable. If the prompt asks for the difference between two values, subtract in the order requested. If it asks for percent change, identify the reference value used as the denominator.

Suppose a chart reports 48 library visits in March and 60 in April. The increase is 12 visits. Percent increase relative to March is 12/48, or 25 percent. Dividing by April’s 60 instead gives 20 percent and answers a different question. Mark the baseline before computing a percentage.

A graph’s visual slope can be misleading if axes use unequal intervals or start above zero. Read the scale and inspect units. If the horizontal axis moves by five years at each tick, the apparent steepness cannot be compared to a graph whose ticks represent one year without adjusting for scale. The numerical labels, not the drawing angle alone, establish the comparison.

Use units as a reasoning check

Units can reveal a wrong operation. Multiplying miles per hour by hours yields miles; dividing miles by hours yields miles per hour. Adding a length to an area is not meaningful. Before entering a result, ask whether its units match the quantity requested. This simple check can expose a formula choice error even when the arithmetic is fluent.

For example, if a bus travels 150 miles in 3 hours, its average speed is 150/3=50 miles per hour. Multiplying those values gives 450, whose units would not represent speed. If a later question asks for distance at the same rate over 2.5 hours, multiply 50 miles per hour by 2.5 hours to get 125 miles. Carrying units through both steps prevents confusing rate with total.

Manage uncertainty without losing time

When a method is not immediately clear, identify the smallest next step. Rewrite the unknown, list the given values, sketch a simple diagram or test a manageable number. If progress stalls, move on when the interface permits review and return with remaining time. Spending several minutes repeatedly rereading the same sentence rarely helps unless you identify what new information you are looking for.

When you return, start with a fresh representation. A ratio problem may become clearer as a table; a geometry problem may need a labeled sketch; a probability problem may need an organized list of outcomes. Do not repeat a failed setup unchanged. A different representation can expose which relationship is missing.

Scored and pretest items

ETS does not publish the exact scored versus pretest split for 5733 in the cited exam information. That means candidates cannot know which item will count. Treat every question as potentially scored, follow its directions and use the full test time responsibly. Do not skip a question because it looks unusual or assume that an unfamiliar format is experimental.

Likewise, no response-mode description here implies a particular scoring weight. The number of items in a domain and their contribution to a scaled score are separate questions. Use the official score report and the requiring authority’s cutoff for decisions rather than estimating a scaled score from the count of correct answers.

A practice routine for this format

Practice with a mix of selected-response and numeric-entry problems. After each item, record whether the miss came from concept knowledge, setup, arithmetic, units, reading or answer entry. For a selected-response miss, explain why the distractor was tempting. For a numeric-entry miss, redo the calculation and inspect the final input separately from the mathematical work.

Include occasional timed sets, but reserve time to review every uncertain answer. Use new values and contexts when repeating a skill so that you test transfer rather than recall of a memorized answer. If your practice material uses a different screen or calculator from the official testing setup, treat it as subject practice and check ETS’s current instructions for the permitted tools.

Format questions candidates often ask

The test is computer delivered and combines selected-response and numeric-entry formats. The published length is 56 questions in 90 minutes. ETS has not published an exact scored versus pretest split in the materials used for this guide. The score required for a credential depends on the receiving state or institution.

What to verify before test day

Review the current 5733 page and code-specific companion for format, tools and sample questions. The current Bulletin governs appointment policies. Check your registration confirmation for the booked mode and time, and check the credential authority for the score it requires. This keeps exam format, appointment logistics and licensing rules tied to the organization responsible for each one.

Use estimation before numeric entry

Estimation gives a quick check on numeric-entry work. For 19% of 310, 20% is 62, so the result should be slightly lower. The exact calculation is 0.19×310=58.9. If you enter 589 or 0.589, the estimate reveals a place-value error. Use the prompt’s precision rule only after calculating with sufficient accuracy.

For an equation, substitute the entered value into the original relation. If x=4 solves 3x+2=14, check 3(4)+2=14. For a probability, make sure the answer remains from zero through one. For volume, verify cubic units. A check should test the model as well as the arithmetic.

One response-mode practice pair can use a discount problem. First solve a selected-response item asking for 15% of $80: choices might include 12, 15, 68 and 92, and the answer is 12. Then remove the options and enter 12 in a numeric field. The skill stays the same, but the second version removes recognition cues.

Treat instructions as part of the problem

An item may specify units, precision or the quantity to report. Those details define the response, not cosmetic formatting. If an answer is 0.375 and the instruction asks for the nearest hundredth, the response is 0.38. If it asks for an exact fraction, preserve 3/8. Practice reading the final sentence before calculating so the response matches the requested form.

When you review a timed set, mark whether extra time would have fixed the result. If the model was wrong, practice setup; if arithmetic was wrong, practice calculation and checking; if the model and arithmetic were right but the final entry was wrong, practice the answer format. This makes the next practice session more targeted.

Check the units at the end

Units can expose a wrong operation even when the number looks plausible. Multiplying a speed by time yields distance, while dividing distance by time yields speed. Multiplying two lengths gives area; multiplying an area by another length gives volume. Keep units through the calculation and confirm that the final unit answers the prompt.

Finish with a direction and scale check

Read whether the item asks for an increase, decrease, difference or total. Then inspect the number line, graph or units before calculating. A correct operation performed in the opposite direction can still produce a plausible result. State the expected direction first and compare it with your final value.

Common questions

How many questions are on Praxis 5733?

The exam has 56 questions with 90 minutes of answering time. Its materials identify selected-response and numeric-entry formats.

Does Praxis 5733 have numeric-entry questions?

Yes. ETS identifies both selected-response and numeric-entry items for this test. Follow each item’s directions for the response it requests.

How many Praxis 5733 questions are unscored?

The exact scored and pretest split is not published in the reviewed ETS materials. Treat every item as consequential.