Forces and Motion: Praxis Physical Science 5485
For Praxis 5485, connect motion descriptions to graphs and forces.
- Velocity describes rate and direction of position change; acceleration describes velocity change.
- Newton’s laws relate net force to motion, while a force diagram and clear system definition prevent common errors about balanced forces, mass and weight.
On this page15 sections
- Position, velocity and acceleration
- Newton’s first law and balanced forces
- Newton’s second law and net force
- Newton’s third law and systems
- Mass, weight and support forces
- Friction, drag and terminal motion
- Work, energy and momentum links
- Worked graph and force checks
- Uniform circular motion
- Projectile motion as two components
- Momentum and collision reasoning
- Impulse links force and motion
- Choose a coordinate system and signs
- Free-body diagrams and common omissions
- Check equations with units and limiting cases
- Exam
- Praxis Physical Science 5485
- Format
- Selected response
- Outline
- ETS code-specific companion
Position, velocity and acceleration
Position identifies location relative to a chosen origin. Displacement is a change in position and includes direction. Velocity is displacement per time; speed is its magnitude. Acceleration measures change in velocity per time, so an object can accelerate by changing speed, direction or both. State which reference frame and time interval the prompt uses.
A position-time graph’s slope gives velocity. A straight line with constant slope indicates constant velocity, while a changing slope indicates changing velocity. A velocity-time graph’s slope gives acceleration, and signed area over an interval corresponds to displacement in the simple one-dimensional model. Always read axes and units before interpreting the curve.
Newton’s first law and balanced forces
Newton’s first law describes inertia: an object at rest remains at rest and an object in motion continues at constant velocity unless acted on by a nonzero net external force. Constant velocity includes both unchanging speed and direction. A moving object does not require a net force in the direction of its movement.
Several forces can act and sum to zero. A book resting on a horizontal table has downward gravitational force and upward support force in a simple model. Neither force disappears; their vector sum is zero. If the book begins accelerating upward, the forces no longer balance. Draw arrows and label interactions rather than equating “moving” with “force present.”
Newton’s second law and net force
For a constant-mass object in the classical regime, Newton’s second law can be written Fnet = ma. The net force is the vector sum of external forces on the defined system. In one dimension, choose a positive direction, add forces with signs and divide by mass. The direction of acceleration matches net force, not necessarily the object’s velocity.
A 6 kg cart experiences 26 N east and 8 N west. Net force is 18 N east, so acceleration is 18/6 = 3 m/s² east. If the cart is already moving west, it can still accelerate east while slowing its westward motion. This distinction between velocity and acceleration is a common conceptual trap.
Newton’s third law and systems
Newton’s third-law forces are equal in magnitude and opposite in direction, but they act on different objects. A foot pushes backward on the ground; the ground pushes forward on the foot. They do not cancel on one object’s force diagram because they belong to two interacting bodies.
Define the system before listing forces. If the system is a cart, include forces acting on the cart. If it is cart plus person, internal interaction forces may not appear in the external-force sum for that combined system. The boundary can change which forces belong in the calculation, while the physical interaction remains.
Mass, weight and support forces
Mass measures inertia and is expressed in kilograms. Gravitational weight is a force, approximately W = mg near a planetary surface. With g assumed to be 9.8 m/s², a 4 kg object weighs about 39.2 N. On a body where g is 1.6 m/s², the same object’s weight is 6.4 N while its mass remains 4 kg.
A scale reading can involve a support or normal force rather than directly reporting gravitational force under every acceleration condition. In a stationary setting, support force may balance weight. In an accelerating elevator, those forces can differ. Read what quantity the item asks for and distinguish gravitational force from apparent weight or a scale reading.
Friction, drag and terminal motion
Friction and drag oppose relative motion or motion through a medium under the model’s conditions. A moving object can experience balanced forces and maintain constant speed if forward and resistive forces sum to zero. An unbalanced resistive force produces acceleration opposite the direction of motion, causing slowing.
For a falling object, gravity and air resistance can balance at terminal velocity in a simplified model. The object still moves; its net force and acceleration are zero. If the prompt asks about the instant before terminal speed, drag may be smaller than weight. Avoid treating a force label as constant without reading how speed or conditions change.
Work, energy and momentum links
For a constant force aligned with displacement, work equals force times displacement. Work transfers energy and can change kinetic energy. If a force is perpendicular to motion, its work on that displacement is zero in the simple dot-product model, even though the force can change direction. The prompt’s geometry and system matter.
Momentum is mass times velocity and is a vector. In an isolated system, total momentum is conserved through interactions, while individual objects can change velocity. A force acting over time relates to impulse and momentum change. These ideas connect motion to interactions, but do not use a conservation rule without checking whether external forces or transfers are negligible.
Worked graph and force checks
Suppose a velocity-time graph rises linearly from 2 m/s to 8 m/s over 3 seconds. Acceleration is the slope: (8 − 2)/3 = 2 m/s². If the object’s mass is 5 kg, the net force in the graph’s direction is 10 N under a constant-mass model. Units verify the chain: m/s divided by s gives m/s²; kg times m/s² gives newtons.
Now suppose a position-time line is horizontal. Its slope is zero, so the object’s position is constant during that interval. It is at rest relative to the chosen frame, not necessarily subject to zero individual forces. A balanced set of forces can act while position remains unchanged. The graph reports motion; the force diagram explains interactions.
Uniform circular motion
An object moving in a circle at constant speed still accelerates because its velocity direction changes. The acceleration points toward the center of the path in the uniform circular model, and the net force points in the same direction. The force is sometimes described as centripetal, meaning center-seeking; it is supplied by a real interaction such as tension, gravity or friction.
Do not add “centripetal force” as an extra force on top of tension or gravity. Identify which physical force provides the inward net force. If the string breaks, the object moves along the instantaneous tangent in the ideal model because the inward force is removed; it does not fly directly outward due to a continuing outward force.
Projectile motion as two components
For an ideal projectile near Earth with negligible air resistance, horizontal velocity remains constant while vertical acceleration is approximately downward with magnitude g. The horizontal and vertical motions are components of one trajectory. Initial velocity direction determines the components; gravity affects vertical motion throughout the flight.
A ball launched horizontally from a table has initial vertical velocity zero but immediately accelerates downward. It does not first travel horizontally and then suddenly fall. In a classroom model, use separate equations for horizontal and vertical components and reunite them at each time. State assumptions about air resistance and local gravity.
Momentum and collision reasoning
Momentum is p = mv, with direction inherited from velocity. In an isolated system, total momentum before and after an interaction is conserved. Individual object momenta can change as forces act between them. In a one-dimensional collision, choose a positive direction and include signed velocities; omitting signs can make a numerical balance appear correct while the physical direction is wrong.
A 2 kg cart moving east at 3 m/s has momentum 6 kg·m/s east. If it collides and sticks to a 4 kg cart at rest, the final velocity under an ideal isolated-system model is 6/6 = 1 m/s east. This assumes external impulse is negligible and the carts move together afterward.
Impulse links force and motion
Impulse is the change in momentum and can be represented as force multiplied by time when force is constant, or as area under a force-time graph. A smaller force acting over a longer time can produce the same momentum change as a larger force over a shorter time. The direction of impulse matches the momentum change.
A safety restraint increases stopping time for a passenger in a simplified collision model, reducing average force for a given momentum change. Such a model supports a physical explanation but does not replace current safety design guidance. When a test item asks about a graph, identify whether its area represents impulse and preserve units.
Choose a coordinate system and signs
For one-dimensional motion, choose a positive direction before assigning signs to displacement, velocity and force. A westward force may be negative if east is positive. The final magnitude can be correct while the direction is wrong, so carry the sign through acceleration and then interpret it in words.
For two-dimensional motion, resolve vectors into components when the problem allows. A projectile’s horizontal and vertical accelerations can differ; a circular path changes direction continuously. Do not combine perpendicular components by ordinary addition of magnitudes unless the vector geometry calls for it.
Free-body diagrams and common omissions
A free-body diagram includes forces acting on the chosen object, not forces the object exerts on others. Include gravity, contact, tension, friction, drag or applied forces when present. Do not add velocity as a force. After drawing, resolve components and sum them.
An elevator and rider system differs from the rider alone. If the system is the rider, the cable does not act directly; the floor or scale exerts a support force. If the system is the full elevator assembly, cable tension is external. Stating the system prevents double-counting and makes Newton’s laws consistent.
Check equations with units and limiting cases
Dimensional analysis can detect a formula error. Force has units kg·m/s²; velocity has m/s. An expression for acceleration should reduce to length per time squared. Carry units in every calculation and convert before comparing values given in different systems.
A limiting case gives a second check. If two horizontal forces become equal and opposite, net force should be zero. If mass doubles while net force stays fixed, acceleration should halve. If a result contradicts these relationships, revisit the diagram and arithmetic.
Common questions
Does a moving object need a net force to keep moving?
No. In the absence of a net external force, an object continues at constant velocity. A net force changes velocity.
What is the difference between mass and weight?
Mass measures inertia in kilograms. Weight is gravitational force, approximately mg, measured in newtons.
Can acceleration point opposite velocity?
Yes. An object moving west can accelerate east if the net force is east; it then slows its westward motion.
What does the slope of a velocity-time graph show?
Acceleration. The signed area under the graph over a time interval gives displacement in the basic one-dimensional model.