Sitonce
Country: US
Show exams for United States Hong Kong
Sign in

Praxis Middle School Science 5442 Sample Questions and Answers

Updated 12 min read
Key takeaway

These original Praxis 5442 sample questions practise science concepts, evidence and teaching decisions across the four content categories.

  • Answer each one before reading its explanation, then review the cause of any mistake.
  • This short worked set is not an official paper, full mock or predictor of your scaled score.
On this page11 sections
  1. Use the questions as a learning check
  2. Controlled investigation
  3. Data and causal claims
  4. Net force and acceleration
  5. Chemical equations
  6. Atoms, isotopes and ions
  7. Energy and catalysts
  8. Inheritance probabilities
  9. Ecosystem energy
  10. Seasons and models
  11. Review the pattern of errors

Use the questions as a learning check

These original questions cover selected ideas in the four Praxis Middle School Science 5442 categories: Nature and Impact of Science and Engineering, Physical Science, Life Science, and Earth and Space Science. They include interpreting evidence and responding to a student's misconception. They are a short explanatory set, not an official paper, a full mock or a blueprint-weighted score predictor. Each question here asks for one best answer, with its reasoning immediately below.

Try each question before reading its explanation. State why your choice answers the specific task and why another option is tempting but wrong. Record a concept error separately from an arithmetic error or a missed condition. The official companion describes 125 selected-response questions in 150 minutes, with possible unscored questions. It also integrates science and engineering practices and tasks of teaching science. This short set does not reproduce those proportions or establish your official scaled score.

Controlled investigation

Example question

A teacher wants to compare two light conditions for seedlings. Which design most directly separates the light treatment from a chamber effect?

  1. Put all bright-light plants in one chamber and all dim-light plants in another, then call every plant a chamber replicate
  2. Use independently replicated chambers for each treatment, with comparable seedlings and other conditions controlled
  3. Measure one plant 30 times under bright light and another plant once under dim light
  4. Change water, soil and light together so that more conditions are tested
Answer: B. Replicating the treatment at the chamber level helps distinguish light from a chamber-specific influence. Comparable conditions and appropriate allocation further strengthen the design. Many plants in a single chamber do not by themselves replicate the chamber-level treatment.

Identify the experimental unit before counting sample size. Repeated ruler readings can improve measurement information, but they do not create independently assigned plants or chambers. If light treatment is applied to a whole chamber, the chamber is a critical unit for evaluating that treatment. A large count of plants inside it cannot erase a systematic temperature difference between chambers. The explanation depends on how treatment is applied, not on a slogan that more measurements always produce a stronger experiment.

A useful extension is to define the outcome as height change over the same interval, with baseline heights recorded. Random allocation helps prevent treatment groups from systematically aligning with preexisting differences, but it does not guarantee that every finite group is identical. Decide in advance how missing or damaged seedlings will be recorded. A classroom teaching task can ask learners to critique this design without conducting a potentially unsuitable experiment. The original scenario supplies design conditions; it does not present observed results or prove that a particular light condition improves growth.

Data and causal claims

Example question

An original survey finds that students who report more outdoor activity also report higher well-being. Which conclusion follows from the survey alone?

  1. Outdoor activity caused the difference for every student
  2. Well-being caused all outdoor activity
  3. The two reported measures are associated in this sample
  4. The survey proves the best treatment for a mental-health condition
Answer: C. The survey describes an association between reported measures. Without a design that addresses alternative explanations, it does not establish the direction or existence of a causal effect, and it does not supply clinical treatment evidence.

A possible third variable, selection into the survey or reporting differences can contribute to the pattern. The correct response does not dismiss the association; it states what the evidence supports. To teach the distinction, ask what data were collected and what conditions were not controlled. An observation can motivate a new investigation while remaining insufficient for a causal conclusion. This question concerns reasoning about evidence, not advice for diagnosing or treating a student.

Change the wording from all students to students in this sample and the scope becomes more accurate, but causation still has not been established. Similarly, a large sample can estimate an association more precisely without correcting every design limitation. Ask whether a proposed revision changes measurement, sampling or causal identification. These are different improvements. An explanation that distinguishes them is more useful than choosing a scientific-sounding option merely because it mentions a large number of participants.

Net force and acceleration

Example question

In an original idealized horizontal model, a 4 kg cart experiences 18 N to the right and 6 N to the left. What is its acceleration?

  1. 6 m/s² to the right
  2. 3 m/s² to the right
  3. 3 m/s² to the left
  4. Zero because two forces act
Answer: B. The net horizontal force is 18 - 6 = 12 N to the right. For the stated constant-mass classical model, acceleration is net force divided by mass: 12/4 = 3 m/s² to the right.

Choose a positive direction and include all relevant external forces for the defined system. Adding the magnitudes of opposite forces gives the wrong resultant. A nonzero force does not by itself tell you the cart's current direction of motion; it tells you the direction of acceleration in this model. A cart moving left can accelerate right while slowing down. To infer velocity after an interval, you also need its initial velocity and the relevant time assumptions.

Now change the forces to 10 N right and 10 N left. The net horizontal force becomes zero, and horizontal acceleration is zero under the same assumptions. That does not require the cart to be stationary; it can move at constant velocity. This changed case is useful for a teaching question in which a learner claims that motion always needs a net force in the direction of travel. Ask the learner to separate velocity from acceleration and individual forces from their vector sum.

Chemical equations

Example question

Which adjustment balances the original equation N₂ + H₂ → NH₃ without changing the substances?

  1. Change NH₃ to NH₂
  2. Use N₂ + 3H₂ → 2NH₃
  3. Use 2N₂ + H₂ → NH₃
  4. Remove the subscript from N₂
Answer: B. One N₂ molecule supplies two nitrogen atoms, and three H₂ molecules supply six hydrogen atoms. Two NH₃ molecules contain the same totals. Changing a subscript changes the chemical formula rather than simply balancing the equation.

Coefficients count particles or moles in the reaction ratio. Subscripts specify the composition of each particle. Write an atom inventory for each side: two nitrogen atoms and six hydrogen atoms. The balanced equation conserves those counts. It does not say that two moles of ammonia have the same mass as two moles of nitrogen, nor that any arbitrary starting mixture reacts completely. Stoichiometric interpretation needs the amounts supplied and the stated reaction assumptions.

An original follow-up supplies one mole of N₂ and one mole of H₂, with only this reaction proceeding to completion. Hydrogen limits the reaction because one mole of nitrogen would require three moles of hydrogen. The maximum ammonia amount is two-thirds of a mole under those assumptions, while nitrogen remains. The exact fraction follows the coefficient ratio. This is a theoretical calculation, not a laboratory procedure or a prediction about reaction conditions. Keep balancing, amount calculation and actual experimental feasibility separate.

Atoms, isotopes and ions

Example question

An original particle description has 12 protons, 13 neutrons and 10 electrons. Which statement is correct?

  1. Its atomic number is 13
  2. It has mass number 22
  3. It has a charge of +2
  4. It is neutral because neutrons exceed electrons
Answer: C. Twelve positive proton charges and ten negative electron charges give net charge +2. Its atomic number is 12, and its mass number is 12 + 13 = 25. Neutrons contribute to mass number but not electrical charge.

Keep three separate quantities in view. Proton count identifies the element, proton plus neutron count gives mass number, and the difference between proton and electron counts gives charge in elementary-charge units. Changing the electron count changes the ion's charge rather than its elemental identity. Changing neutron count produces another isotope of the same element. A periodic table's average atomic mass is also different from the mass number of one specified isotope.

To check understanding, retain 12 protons and 13 neutrons but change the electrons to 12. The particle is then neutral while its atomic number and mass number stay unchanged. Next retain 12 electrons and change neutrons to 14: it remains a neutral atom of the same element, with mass number 26. Working these changes one at a time reveals whether a learner has memorized one answer or understands which count controls which property.

Energy and catalysts

Example question

An original reaction-energy model begins at 50 arbitrary units and ends at 30. Its uncatalyzed peak is 110, while a catalyzed path peaks at 80. Which statement fits this model?

  1. The catalyst changes the reaction energy difference from -20 to -50
  2. The catalyst lowers the forward activation barrier from 60 to 30 units
  3. The catalyst makes the ending energy 80 units
  4. The catalyst changes the initial energy to 110 units
Answer: B. The barrier is peak energy minus initial energy. It changes from 110 - 50 = 60 to 80 - 50 = 30 units. The final-minus-initial difference stays 30 - 50 = -20 units for the represented reaction.

Read initial state, peak and final state separately. A catalyst supplies an alternative pathway with a lower activation barrier; it does not redefine the reactant and product energy difference in this representation. Students often confuse the height of a peak with the ending energy. Ask them to point to the two states used in each subtraction. The arbitrary numbers are original teaching values, not measured thermodynamic data or a biological treatment claim.

Reverse the represented reaction and the initial energy is now 30, with final energy 50. The energy difference becomes +20. The uncatalyzed reverse barrier is 110 - 30 = 80, and the catalyzed reverse barrier is 80 - 30 = 50. This extension reinforces that a barrier is measured from the relevant starting state. It also demonstrates why a catalyst does not turn an energetically unfavorable direction into a favorable one merely by lowering the peak. The example addresses the model, not detailed rate constants.

Inheritance probabilities

Example question

For an original single-locus model with complete dominance, two heterozygous parents Aa produce offspring. What is the probability of the recessive phenotype under the stated model?

  1. 0
  2. 1/4
  3. 1/2
  4. Exactly one offspring in every group of four
Answer: B. The equally likely combinations are AA, Aa, aA and aa. Only aa has the recessive phenotype under complete dominance, giving probability 1/4. This is an expected probability, not a guaranteed pattern in every small group.

The assumptions matter: a single locus, the stated parental genotypes, the simple inheritance model and complete dominance. Do not extend this calculation to every human trait or use it as personalized genetic guidance. In a set of four independent outcomes, zero, one or several recessive-phenotype offspring are possible. A probability of one-quarter is not a rule that nature distributes the outcome evenly in blocks of four.

A teacher can respond to the misconception by asking learners to distinguish possible outcomes from a guaranteed family count. An original classroom simulation might record many independent draws under the model, then compare the overall proportion with smaller groups. Deviations in a small sample do not automatically invalidate the assumed probability. The instructional aim is reasoning about variation and expectation, not copying a diagram's answer without noticing its assumptions.

Ecosystem energy

Example question

Which statement best distinguishes energy flow from matter cycling in an ecosystem?

  1. All energy cycles indefinitely without transfer to the surroundings
  2. Matter can cycle through organisms and the environment, while energy is transferred and eventually dispersed as heat
  3. Consumers create new energy from nothing
  4. Decomposers remove all matter from the system permanently
Answer: B. Matter can move through repeated biological and environmental pathways. Energy passes through the system and is transferred to the surroundings, including as heat. Organisms transform energy rather than create it from nothing.

A food web represents feeding relationships and energy transfer, but arrows must be interpreted using its stated convention. Distinguish energy flow from the movement of a particular atom through a nutrient cycle. A decomposer's role does not imply that all material disappears; decomposition transfers and transforms matter. Likewise, saying that energy is dispersed does not mean it is destroyed. Conservation and the usefulness of energy for biological work are different ideas.

An original explanatory exercise supplies a fictional transfer efficiency of 20% for one step, rather than claiming a universal value. If 500 units are available at the preceding level, the stipulated transferred amount is 100 units. The result follows that assumption. Real transfer efficiencies differ, so do not treat the calculation as a fixed law for every food chain. Changing the stipulated percentage tests proportional reasoning while preserving the conceptual distinction between transferred energy and cycled matter.

Seasons and models

Example question

A learner says both hemispheres have summer when Earth is closest to the Sun. Which explanation best addresses the error?

  1. Distance alone explains opposite seasons
  2. Earth’s tilted axis changes the sunlight received by each hemisphere during the orbit
  3. The Sun turns off in one hemisphere
  4. The hemisphere with fewer oceans has no winter
Answer: B. The axial tilt changes illumination as Earth travels around the Sun. Opposite hemispheres have opposite seasonal timing, which a single shared Earth-Sun distance cannot explain on its own.

A useful teaching response connects the model to an observation it must explain: opposite seasonal timing. Ask learners to track which hemisphere tilts toward the Sun at two different positions in the orbit, while keeping the axis orientation approximately consistent over that yearly illustration. Avoid making the axis point toward the Sun at every orbital position, which can hide the very mechanism being taught. The model is a representation rather than a scale replica of distances or sizes.

Do not confuse daily rotation with yearly revolution. Rotation explains the regular alternation of daylight and darkness at a location; the orbit and tilt explain seasonal changes in solar illumination. A correct response can state both mechanisms without treating them as competing explanations for the same phenomenon. NASA's seasonal explanation supports the tilt concept. This original question and teaching discussion do not reproduce its artwork or claim that every locality has identical weather whenever a hemisphere is in summer.

Review the pattern of errors

After completing the set, group mistakes by reasoning need: experimental units, association versus causation, vectors, atom counts, energy references, probability, or interpreting a model. Select unfamiliar follow-up problems that change a relevant condition. Explain each revised answer before checking it. This is more useful than repeating the same letter sequence. The set gives a starting diagnosis across several domains, but it leaves substantial outline content untested and cannot establish readiness by itself.

For an original revision schedule, use 20 minutes to explain two missed concepts, 20 minutes for fresh changed-condition questions, and 10 minutes to record remaining uncertainties. That totals 50 minutes and is an illustrative study block, not an official test timing recommendation. If the problem involves a teaching decision, explain the student's reasoning and the evidence an activity could reveal. If it involves calculation, show the equation, units and assumption. Preserve those distinctions when you move to a broader preparation plan.

Common questions

Are these official ETS questions?

No. They are original teaching exercises linked to selected topics in the 5442 outline. They do not reproduce the official sample items.

Is this a complete mock exam?

No. It is a short explanatory set and does not reproduce the official length, domain proportions or interface.

Can I convert the result into a scaled score?

No. The exercise has no established official raw-to-scaled conversion and does not sample the full assessment.

Should I memorize the explanations?

Use them to explain the mechanism and solve changed-condition problems. Remembering an answer letter does not demonstrate transfer.