Praxis 5266: Original Sample Questions with Worked Answers
These two original Praxis 5266 questions test how to use force and motion representations.
- In Question 1, calculate acceleration from net force and mass.
- In Question 2, read the slope of a velocity-time graph.
- Both are unofficial examples; the Study Companion remains the source for the exam’s official sample format.
On this page6 sections
What the Physics 5266 outline covers
The official 5266 companion organizes physics into five approximate areas: Nature and Impact of Science and Engineering, Principles and Models of Matter and Energy, Mechanics, Electricity and Magnetism, and Waves. Half or more of the questions integrate Science and Engineering Practices. Approximately one-quarter to one-third apply physics in teaching scenarios or instructional tasks. The exam may include questions that do not count toward the score.
A worked acceleration example
A cart moves from rest to 6 meters per second in 3 seconds. If the change is uniform, acceleration is the change in velocity divided by elapsed time, or 2 meters per second squared. A velocity-time graph would show a straight rising line, and its slope gives the same acceleration. This original practice example assumes constant acceleration; it is not an ETS item.
When reviewing a solution, connect the equation to the graph and the motion description. Check units and ask whether the direction and magnitude make sense. Practice different representations of the same situation so that a formula is not used mechanically. The official companion provides code-specific samples and explanations.
Measurement, models, and evidence
Atomic models explain matter at scales that are not directly visible. Atoms contain protons, neutrons, and electrons, while isotopes differ in neutron number. A model may represent particles as points or paths, but its picture is not a literal scale map. Distinguish chemical changes involving electrons and bonds from nuclear changes involving the nucleus. Use evidence in a prompt to identify which model feature is relevant rather than memorizing a diagram without its assumptions.
Temperature relates to average particle kinetic energy, while heat describes energy transferred because of a temperature difference. During a phase change, energy may change particle separation without a temperature increase. Calorimetry uses mass, specific heat, and temperature change under stated assumptions. Track energy into and out of the chosen system and keep units consistent. Avoid describing cold as a substance flowing into an object or treating temperature and total thermal energy as interchangeable.
Motion and kinematic representations
Position, displacement, velocity, and acceleration describe different features of motion. The slope of a position-time graph gives velocity; the slope of a velocity-time graph gives acceleration, while area under that curve gives displacement. Read axes and sign conventions before interpreting the shape. A horizontal line can mean constant position or constant velocity depending on the graph. Translate between a graph, a verbal description, and equations, then check whether the result fits the physical situation.
A free-body diagram isolates one object and shows external forces acting on it. Net force determines acceleration, not velocity itself. An object can move at constant velocity while forces balance, and action-reaction pairs act on different objects. Friction, tension, normal force, gravity, and applied forces depend on the system and contact conditions. Draw the diagram before selecting an equation. Explain a change in motion from the resultant force and avoid using a force as a synonym for motion.
Work transfers energy when a force acts through displacement along its direction. Kinetic and potential energy can change form while total energy is conserved in a defined system, though thermal transfer may move energy to surroundings. Choose a system boundary and account for the relevant interactions. Power describes the rate of energy transfer or work. A problem may use energy methods more simply than forces, but the result still must match the stated initial and final conditions.
Momentum is mass times velocity and is a vector. In an isolated system, total momentum is conserved during an interaction. Impulse connects force and the time interval over which it acts to a change in momentum. Distinguish elastic collisions, where kinetic energy is conserved, from inelastic ones, where some kinetic energy becomes other forms. A longer stopping time can reduce average force for the same momentum change. Use signs consistently and define the system before applying conservation.
Torque depends on force, lever arm, and the angle between them. Rotational equilibrium requires zero net torque, while translational equilibrium requires zero net force. Rotational inertia depends on how mass is distributed relative to the axis. Compare angular and linear quantities carefully: angular velocity is not ordinary speed, and torque is not simply force. A diagram showing pivot points and perpendicular distances often clarifies a lever or balance problem.
A wave transfers energy and information while the medium’s particles oscillate around equilibrium in mechanical waves. Frequency, period, wavelength, and wave speed are related, but amplitude describes a different feature. Sound requires a medium, and its speed depends on that medium. Higher frequency corresponds to higher pitch; amplitude relates to loudness in ordinary listening contexts. Read a wave diagram’s axes and identify whether it shows displacement over distance or time.
Reflection and refraction describe changes in ray direction at surfaces or boundaries. The law of reflection equates incident and reflected angles measured from the normal. Refraction depends on the optical properties of the media and can change both direction and wavelength while frequency remains the same across a stationary boundary. Ray diagrams help locate images for mirrors and lenses, but conventions matter. Identify the surface, object distance, and sign convention before calculating or describing an image.
Electric charge is conserved, and like charges repel while unlike charges attract. An electric field describes force per unit positive test charge and points in the direction a positive charge would accelerate. Electric potential energy depends on charge and location; potential difference is energy per charge. Distinguish field from force and voltage from energy. In a diagram, field lines indicate direction and relative density, but they are not physical paths. Use symmetry and superposition when several charges contribute.
Current is rate of charge flow, voltage is energy per charge, and resistance relates voltage and current for an ohmic element under appropriate conditions. Series components share current; parallel branches share voltage. Conservation of charge and energy underlies circuit rules. Electrical power can be expressed using voltage, current, or resistance relationships. Draw a simplified circuit and label known quantities before calculating. Do not assume an ideal rule applies to a non-ohmic device unless the prompt supports that model.
Magnetic fields exert forces on moving charges and currents, with direction depending on velocity or current and field orientation. A changing magnetic flux can induce an electromotive force. The effect depends on the rate of flux change, not simply on the presence of a magnetic field. Use a right-hand rule carefully and state the object whose force direction is sought. In induction, a change in field, area, or orientation can matter. Connect the observation to energy conservation rather than treating induced current as energy from nowhere.
Electromagnetic waves do not require a material medium. In a vacuum, their speed is constant, while wavelength and frequency vary inversely. The spectrum spans radio waves through gamma rays, with different interactions and applications. Photon energy increases with frequency. Distinguish a wave’s frequency from the frequency of a source’s signal as modified by relative motion. Use the question’s scale and units and avoid assuming every wave requires air or another medium.
Pressure is force per area. In a fluid at rest, pressure depends on depth, fluid density, and gravitational field. Buoyant force equals the weight of displaced fluid in the usual Archimedes model. Whether an object floats depends on its average density and displaced volume, not simply its mass. For moving fluids, continuity and energy relationships apply under specified assumptions. Identify whether a problem concerns a static or flowing fluid before choosing a model.
Half or more of questions integrate Science and Engineering Practices, and roughly one-quarter to one-third place physics in a teaching task. Such items may ask how to evaluate a student model, design a measurement, interpret a graph, or select evidence. Identify the science concept and the instructional goal. Choose the response that exposes or addresses the reasoning, not an activity disconnected from the misconception.
Question: relate force, mass, and acceleration
A 3.0 kg cart experiences a net force of 12 N along a straight track. Ignoring friction, what is its acceleration?
- 0.25 m/s²
- 4.0 m/s²
- 9.0 m/s²
- 36 m/s²
Question: interpret a velocity-time graph
A velocity-time graph is a straight line rising from 2 m/s at t = 0 s to 10 m/s at t = 4 s. What does the slope represent, and what is its value?
- Displacement; 2 m
- Acceleration; 2 m/s²
- Acceleration; 8 m/s²
- Force; 12 N
Common questions
How long is Praxis Physics 5266?
The exam has 125 questions in 2 hours 30 minutes.
Can I use a calculator?
A calculator is not required. Reference information is available through the Help screen.
What is the passing score?
The state licensing agency sets the accepted test and qualifying score for each credential, so requirements vary by state and credential.
Does the exam include teaching scenarios?
Approximately one-quarter to one-third of questions may apply physics in a teaching task.