Sitonce
Country: US
Show exams for United States Hong Kong
Sign in

Praxis 5246: Original Sample Questions with Worked Answers

Updated 10 min read
Key takeaway

These original Praxis Chemistry 5246 examples show how to set up stoichiometry, identify a limiting reagent, track units, and explain assumptions.

  • They are practice material, not ETS questions.
  • Use the worked steps to check your reasoning, then solve a new problem with different quantities or conditions.
On this page24 sections
  1. What Chemistry 5246 covers
  2. How to use this guide
  3. A worked stoichiometry example
  4. Scientific models, evidence, and measurement
  5. Atomic structure and isotopes
  6. Electron configurations and periodic behavior
  7. Chemical quantities and the mole
  8. Composition, formulas, and mixtures
  9. Bonding and molecular structure
  10. Intermolecular forces and material properties
  11. States of matter and phase changes
  12. Thermochemistry and energy accounting
  13. Chemical equations and stoichiometry
  14. Reaction classes and oxidation-reduction
  15. Kinetics and reaction mechanisms
  16. Equilibrium and Le Chatelier reasoning
  17. Solutions, concentration, and solubility
  18. Acids, bases, and aqueous reactions
  19. Laboratory safety and experimental reasoning
  20. Interpreting representations and quantitative data
  21. Chemistry teaching tasks and misconceptions
  22. Explain each step, including assumptions
  23. Question: identify the limiting reactant
  24. Question: compare acidity on the pH scale

What Chemistry 5246 covers

The five approximate content categories are Nature and Impact of Science and Engineering (14%); Principles and Models of Matter and Energy (25%); Chemical Composition, Bonding, and Structure (20%); Chemical Reactions and Periodicity (23%); and Solutions and Acid-Base Chemistry (18%). Half or more of questions integrate chemistry with a Science and Engineering Practice, and approximately one-quarter to one-third apply content in a teaching task. Some items may not count toward the score.

How to use this guide

Work through an original limiting-reagent example and use the same explanation routine for other question types. The examples are written for practice and are not reproduced ETS test items.

A worked stoichiometry example

Suppose a balanced reaction uses 2 mol of A for each 1 mol of B. If a sample contains 3.0 mol A and 2.0 mol B, compare the product each reactant could form: A supports 1.5 mol of product, while B supports 2.0 mol. A is limiting, so the theoretical yield is 1.5 mol product. This original example tests coefficient ratios and limiting reagent logic; it is not an ETS item.

For every solution, show the balanced equation, conversion, coefficient ratio, and unit in the final result. Then ask whether the quantity is plausible and which assumptions were made. Practice a mix of calculations and conceptual questions. The actual test does not require calculator use, according to ETS, so train with estimation and careful arithmetic. Use the companion’s official samples to see how chemistry reasoning is framed.

Scientific models, evidence, and measurement

Chemistry explanations connect a model to measurable evidence. Identify the system, the substances present, the conditions, and the property being measured. Check units, significant figures, instrument limits, and whether the comparison is controlled. A particle model can explain macroscopic observations, but it is still a representation with assumptions. In a data question, distinguish observation from inference and state what additional measurement could test competing explanations. When students interpret a lab result, evaluate whether their claim follows from the data and whether the procedure controls relevant variables.

Atomic structure and isotopes

An atom contains a positively charged nucleus of protons and neutrons surrounded by electrons. Atomic number identifies the element; isotopes differ in neutron number and therefore mass number. Ion formation changes electron count without changing the identity of the nucleus. Models of the atom developed as evidence changed, so distinguish a useful diagram from a literal scale picture. For nuclear processes, compare the particles and energy before and after the change, and apply conservation to the quantities relevant to the process.

Electron configurations and periodic behavior

Electron arrangement helps explain periodic behavior and chemical bonding. Valence electrons are especially important for many main-group reactions, while transition elements show additional patterns. Across a period, effective nuclear attraction and shielding help explain trends such as atomic radius and ionization energy; down a group, added energy levels and shielding change those patterns. Treat trends as models for prediction, not as substitutes for supplied data. Relate element position to likely properties and explain where the prediction is approximate.

Chemical quantities and the mole

The mole links particle counts to measurable mass through Avogadro’s constant. Molar mass converts between grams and moles, while formula subscripts describe relative particle ratios. Dimensional analysis keeps units visible and helps catch inverted conversion factors. In a stoichiometry task, write a balanced equation first, convert the known quantity to moles, use the coefficient ratio, and convert to the requested unit. Check whether the result is chemically plausible and whether the question provides a needed constant or conversion factor.

Composition, formulas, and mixtures

Percent composition describes the mass contribution of each element in a compound. Empirical formulas express the simplest whole-number atom ratio, while molecular formulas give the actual count in a molecule and may be multiples of the empirical formula. Mixtures contain substances physically combined, whereas compounds have elements chemically bonded in definite proportions. Separate these ideas when classifying samples or interpreting a composition table. Show how data lead to a formula rather than guessing from a familiar name.

Bonding and molecular structure

Ionic bonding commonly involves electrostatic attraction among ions, while covalent bonding involves shared electron pairs. Lewis structures organize valence electrons and help show connectivity, lone pairs, and possible formal charges. Molecular geometry depends on electron-domain repulsions, and polarity depends on both bond polarity and three-dimensional shape. A polar bond does not guarantee a polar molecule because dipoles can cancel. For a structure question, move from electron count to bonding pattern to geometry and then to the property being asked about.

Intermolecular forces and material properties

Intermolecular attractions influence boiling point, melting point, viscosity, and solubility. Relevant interactions include dispersion forces, dipole attractions, and hydrogen bonding when appropriate atoms and bonds are present. These attractions are distinct from the covalent or ionic bonds within a substance. When comparing properties, hold other factors in view, such as molecular size and shape. A stronger intermolecular attraction often requires more energy to separate particles, but avoid applying a one-factor rule where multiple structural features differ.

States of matter and phase changes

The particle model describes solids, liquids, and gases by particle arrangement, motion, and interactions. Heating can increase average kinetic energy or drive a phase change in which energy changes particle separation and potential energy. During a pure-substance phase transition at constant pressure, temperature may remain steady as energy is transferred. Read heating curves by identifying segments and plateaus, and distinguish a change of state from a chemical reaction. Use pressure and composition information when interpreting unusual phase behavior.

Thermochemistry and energy accounting

Thermochemistry tracks energy transfer during physical and chemical change. System and surroundings must be defined before calling a process exothermic or endothermic. Calorimetry relates heat transfer to mass, specific heat, and temperature change when the stated assumptions apply. Enthalpy changes can be combined using balanced equations and reaction scaling. Keep signs and units consistent, and distinguish heat transferred during a process from temperature itself. A useful solution explains what evidence supports the direction and magnitude of energy flow.

Chemical equations and stoichiometry

A balanced chemical equation conserves atoms and charge, and its coefficients provide mole ratios. They do not directly represent masses or individual molecules in a macroscopic sample. For limiting-reagent problems, calculate how much product each reactant could form, then identify the smaller yield. Theoretical yield follows from the limiting reagent; percent yield compares actual and theoretical amounts. A low yield may reflect incomplete reaction, side reactions, transfer losses, or measurement error, so do not assume one cause without evidence.

Reaction classes and oxidation-reduction

Common reaction patterns include synthesis, decomposition, combustion, acid-base neutralization, and single or double replacement. Classifying a reaction is only the first step; check reactants, products, and conservation. Oxidation numbers help track electron transfer: oxidation is an increase in oxidation number and reduction is a decrease. Identify what is oxidized and reduced, and consider the role of spectator ions in ionic equations. In electrochemical settings, connect electron flow to the paired oxidation and reduction processes.

Kinetics and reaction mechanisms

Reaction rate describes how concentration changes over time. Collision theory relates successful reactions to particle collisions with sufficient energy and suitable orientation. Concentration, surface area, temperature, and catalysts can affect observed rates in ways the experimental setup can isolate. A catalyst changes a pathway and lowers activation energy without changing the net reaction or equilibrium position. Rate laws are determined from experimental evidence, not generally from balanced-equation coefficients. Read axes and conditions before inferring a rate relationship.

Equilibrium and Le Chatelier reasoning

At dynamic equilibrium, forward and reverse reaction rates are equal while concentrations remain constant under fixed conditions. The equilibrium constant describes a relationship among species at a given temperature; it does not state that concentrations are equal. Changes in concentration, pressure, or temperature can shift the composition according to the system and reaction. A catalyst speeds approach to equilibrium but does not change the equilibrium constant. When evaluating a prediction, specify the disturbance and the response rather than relying on a slogan.

Solutions, concentration, and solubility

A solution is a homogeneous mixture of solute and solvent. Concentration may be expressed in several ways, including molarity, which is moles of solute per liter of solution. Dilution changes concentration while conserving the amount of solute in the ideal calculation. Solubility depends on the solute, solvent, temperature, and sometimes pressure. Distinguish dissolving from reacting, and distinguish a saturated solution from a concentrated one. Interpret tables and curves using their stated conditions and units.

Acids, bases, and aqueous reactions

Acid-base models include proton transfer and electron-pair interactions, with the appropriate model depending on the question. Strong and weak describe extent of ionization, not concentration. The pH scale is logarithmic, so equal numerical steps represent tenfold changes in hydrogen ion concentration in the usual dilute aqueous context. Neutralization can form water and a salt, but not every acid-base reaction has the same simple products. Use the provided concentrations and definitions, then check whether the requested quantity is pH, pOH, or a species concentration.

Laboratory safety and experimental reasoning

A chemistry investigation needs a question, safe procedure, controlled conditions, clear measurements, and a conclusion tied to evidence. Identify independent and dependent variables, repeated trials, and possible sources of systematic or random error. Safety decisions depend on the specific hazard and institutional procedure; consult the current safety data and instructor guidance rather than guessing from a chemical name. In an instructional scenario, choose a response that preserves student safety while allowing meaningful observation and analysis.

Interpreting representations and quantitative data

Chemistry moves between symbolic equations, particle-level diagrams, and macroscopic observations. Translate carefully: a coefficient, subscript, charge, and phase label each carry different information. For graphs, read axes, units, and conditions before describing a trend. For tables, compare like quantities and notice uncertainty or significant figures. If a calculated value disagrees with an observation, revisit assumptions, units, and the model rather than forcing a match. Explain the relationship among representation, evidence, and chemical claim.

Chemistry teaching tasks and misconceptions

The official description says approximately one-quarter to one-third of items place chemistry in a teaching or instructional task, and half or more integrate Science and Engineering Practices. A classroom item may ask what a student model reveals, which evidence would test an explanation, or what instructional move is appropriate. Identify the target idea and the student’s reasoning before choosing a response. Address the underlying misconception with a representation or investigation that yields observable evidence. Avoid selecting a classroom activity simply because it is engaging if it does not answer the instructional need.

Explain each step, including assumptions

A worked solution should show the balanced equation, conversion factors, limiting reagent decision, and units. A conceptual answer should name the model and connect it to the evidence in the prompt. For multiple-selection practice, explain why each selected option is supported and why each rejected option is not. This makes feedback more useful than a bare answer key. After correction, change one condition and predict how the result should change.

Question: identify the limiting reactant

Original practice question

Hydrogen and oxygen react according to 2H₂ + O₂ → 2H₂O. A mixture contains 4.0 mol H₂ and 1.0 mol O₂. Assuming the reaction proceeds to completion, which statement is correct?

  1. H₂ is limiting and 1.0 mol H₂O forms.
  2. O₂ is limiting and 2.0 mol H₂O forms.
  3. O₂ is limiting and 4.0 mol H₂O forms.
  4. Neither reactant is limiting because the coefficients are balanced.
Answer: B. The balanced equation requires two moles of H₂ for each mole of O₂. One mole of O₂ reacts with two moles of H₂, leaving two moles of H₂ unused and producing two moles of H₂O. The coefficients describe ratios, not equal quantities.

Question: compare acidity on the pH scale

Original practice question

At the same temperature, solution X has pH 2 and solution Y has pH 4. Which statement best compares their hydrogen-ion concentrations?

  1. X has about 2 times the hydrogen-ion concentration of Y.
  2. X has about 100 times the hydrogen-ion concentration of Y.
  3. Y has about 100 times the hydrogen-ion concentration of X.
  4. They have equal hydrogen-ion concentrations because both are acidic.
Answer: B. Each one-unit pH difference represents a tenfold change in hydrogen-ion concentration. A two-unit difference therefore corresponds to about a hundredfold difference, with the lower-pH solution having the higher concentration.

Common questions

How many questions are on Praxis Chemistry 5246?

The exam has 125 questions and a 2-hour-30-minute test.

Can I use a calculator?

A calculator is not needed. The test page describes reference information available through the Help screen.

What is the passing score?

It varies by state and credential. Check the current ETS requirements lookup and confirm with your licensing agency.

How should I prepare for teaching scenarios?

Review chemistry concepts alongside evidence interpretation and student reasoning. Approximately one-quarter to one-third of questions may use an instructional task.