NRSB RRS Mitigation Passing Score
70% or better is required to pass the 125-question RRS exam.
- That threshold is an official NRSB rule, not a guarantee of state licensure or a published pass rate.
- The Board’s sources do not establish a universal raw-score conversion method, so do not infer more than they publish.
On this page13 sections
- Use feedback without reconstructing the exam
- Use practice scores as feedback, not a promise
- A passing score and certification decision are different
- The published passing threshold
- Why percent and raw count may differ
- Score threshold is not a pass-rate statistic
- What the score does and does not certify
- How to prepare for a threshold without chasing it
- Interpret practice results carefully
- What happens if you pass
- What happens if you do not pass
- Avoid common scoring misunderstandings
- Use the score in a professional context
A score of 70% or better is required to pass the RRS exam. The test has 125 multiple-choice questions. Candidates should verify this threshold on the live Board materials before scheduling, because certification policy can change.
- Credential
- NRSB Radon Reduction (Mitigation) Specialist
- Topic
- NRSB RRS Mitigation Passing Score
- Design principle
- Diagnose, design, install, verify and document
- Source guide
- NRSB Certification Exams Study Guide, April 2026 v1.1
Use feedback without reconstructing the exam
A topic-level score report can show where study time may help, but it is not a transcript of individual items. Keep your review focused on concepts and source material. Do not infer which exact questions appeared from a broad subject indicator.
Write fresh cases that test the same skill with different building facts. This guards against remembering a specific answer while misunderstanding why it was right.
If a score detail is unclear, ask NRSB what it means. Avoid interpreting an unexplained scale or letter grade from a third-party forum.
Use practice scores as feedback, not a promise
A practice set is useful when its questions are original, explanations are accurate and topic coverage is broad. It is not an official score report. Do not compare a self-written 80% with NRSB’s 70% threshold as though the items were equated.
Track confidence as well as correctness. A guessed answer may indicate a latent gap even if marked correct. Explain why the best option fits and name a new fact that would change the decision.
If a score fluctuates, inspect the questions. A set heavy in familiar installation content may conceal weak performance on water treatment or ethics. Use domain-level review instead of relying on a single total.
A passing score and certification decision are different
The exam threshold answers whether a candidate met NRSB’s knowledge criterion. The certification process separately checks the approved training, continuing education and ethics conditions. A passing result may therefore be followed by an administrative request or application step.
The credential itself is different from legal permission to provide services. Ask the state radon program whether NRSB RRS is accepted and what additional documents are required. If the work includes plumbing or electrical installation, check those trade rules separately.
Avoid turning the score into a claim about job quality. A test result is one piece of evidence about knowledge. Safe installation, accurate reporting and ongoing maintenance still depend on professional practice.
The published passing threshold
The threshold is a criterion set by NRSB for its exam. It does not describe how difficult a particular form is, how many candidates pass or whether the exam is scaled. Unless NRSB publishes those technical details, candidates should not invent a raw question count or score conversion.
The easiest reliable answer is also the most honest: NRSB publishes a 70% threshold. If a question asks what score is required, cite the Board. If it asks how many items you need correct, check whether the Board states that the score is calculated as a simple percentage of raw correct answers before doing arithmetic.
Why percent and raw count may differ
A 70% threshold applied to 125 equally weighted scored questions would correspond arithmetically to 87.5 questions, but the official source does not state that candidates can pass with a particular rounded raw count. Exam scoring can involve procedures not fully described on the public page, including how items or forms are scored. Avoid turning arithmetic into an official rule.
When studying, use percentages as a progress measure rather than reverse-engineering the live exam. A practice score of 70% on self-written items does not ensure an official pass because item quality, coverage, difficulty and scoring can differ.
If the Board publishes a detailed score policy later, update your understanding from that primary source. Until then, state the threshold and explain that exact raw-score mapping is not confirmed in the current materials.
Score threshold is not a pass-rate statistic
A passing threshold tells you what standard a candidate must meet. A pass rate tells you what share of a candidate group passed over a defined time period. Those are different statistics. The current NRSB materials do not provide an official public RRS pass-rate series.
Do not trust a third-party claim that the exam has a certain pass rate unless it cites the population, period, denominator and NRSB source. A course provider’s student outcomes may not represent all exam candidates and may use a different cohort or definition.
For preparation, use the syllabus and your own diagnostic performance. Missing pass-rate data do not prevent useful study planning. They simply mean that a public percentage should not be claimed.
What the score does and does not certify
Passing demonstrates that you met NRSB’s knowledge threshold for the exam. It is one requirement in a broader certification process that includes approved mitigation training, hands-on learning, measurement training, continuing education and ethics. Review the current application steps to learn what remains after the result.
The score does not automatically grant permission to perform regulated work in every state. State radon programs may require licensing, registration, additional examination, insurance or specific business credentials. Other trades may require separate licenses. Ask the regulator before advertising or accepting a project.
A passing score also does not guarantee that a particular system design will work in every building. Practical judgment and field competence remain essential. Certification is an important signal, but it is not a substitute for site-specific diagnosis and performance verification.
How to prepare for a threshold without chasing it
Aim for a buffer on practice rather than trying to land exactly at 70%. Since practice questions may not match exam difficulty, build competence across all syllabus domains. Diagnose weak areas from errors and use current sources to repair the underlying misunderstanding.
For each scenario, state what evidence supports a mitigation approach, what standard controls the detail, what safety issue could arise and how performance will be checked. This helps with questions that combine multiple subject areas. Published domain counts overlap because some items cover more than one area.
Use a mixture of retrieval practice, worked examples, technical reading and supervised field learning. An RRS candidate who only memorizes isolated terms may struggle when the stem changes the foundation, substrate, HVAC condition or client objective.
Interpret practice results carefully
A practice score can help identify patterns but should not be treated as a prediction. Track both accuracy and confidence. If you answered correctly by guessing, mark it for review. If you answered incorrectly because you missed a word, practice reading the stem more carefully; if you lacked a concept, return to the standard or study guide.
Keep a simple error log with topic, error type, source to revisit and follow-up question. Review after a few days to see whether the idea is retained. This is more helpful than repeating the same question until its answer is memorized.
Avoid using leaked or purported live questions. They may be inaccurate, violate exam rules or teach the wrong reasoning. Original practice scenarios can test the same concept without pretending to be an official paper.
What happens if you pass
The result first appears preliminarily and is followed by an audited final result and detailed score letter within the stated period. Use the final result for records and complete the remaining certification requirements. Store training proof, ethics documents and CE information together.
Ask NRSB whether the final score letter is sufficient for your application or whether additional documents are needed. Employers and state regulators may request specific verification. Do not assume an unofficial screenshot will satisfy their process.
Set a reminder for the exam-validity period and certification renewal. An exam is valid for one year for NRSB certification. Confirm how that applies to your application and any state route.
What happens if you do not pass
A result below the threshold means the exam requirement remains unmet. NRSB currently states a 14-day wait before registering again. Check the current rule and fee at the next registration. Review the detailed score letter for topic feedback and revise your preparation accordingly.
Do not interpret a failed attempt as evidence that you cannot perform the work. It identifies a gap relative to one test form and threshold. Return to the course, standards and supervised practice where the score feedback points. Rebuild knowledge rather than memorizing exam recollections.
Protect exam integrity. Do not share or solicit live item content. Describe the concepts you need to study without reproducing questions. This keeps the next attempt focused on competency and follows the Board’s rules.
Avoid common scoring misunderstandings
Candidates sometimes say “I need 88 correct” because they multiply the threshold by the total question count and round up. That is arithmetic under an assumed raw-score model, not a number confirmed by the published guide. Do not present it as NRSB’s official rule unless the Board states it.
A second misunderstanding is to call 70% a pass rate. It is a candidate score threshold. A third is to assume a pass provides state licensure. These errors can spread in marketing and peer discussion, so use exact wording from NRSB and identify the credential issuer.
If a course promises a guaranteed result, read the terms. No study method can promise a score. The Board controls the official scoring and certification process.
Use the score in a professional context
When telling an employer or client about the credential, state that you hold NRSB RRS only after certification is issued. Passing the exam alone may not mean the application is complete. Use accurate initials and the full credential name so clients do not mistake mitigation expertise for measurement licensing.
If a state application asks for an exam score, provide the official document through the approved channel. Protect account credentials and personal information. Ask the regulator what evidence it accepts and whether the score must be sent directly from NRSB.
The score is a confidential professional record. Share it only with those authorized or required to receive it. If a client asks whether 70% predicts project quality, explain that exam performance and job outcome are related only in a limited way; design and installation must still meet standards and be verified.
This article uses the current NRSB April 2026 v1.1 study guide and digital exam page. It does not claim a raw score conversion, public pass rate or guaranteed result because those were not verified in the primary sources.
The Board may publish new scoring information. Check its current exam page before relying on a score detail. If a question asks something not stated, ask NRSB rather than infer a policy from arithmetic.
The practical takeaway is to learn the official threshold, prepare broadly and treat the final score communication as authoritative. Avoid claims that exceed those facts.
Common questions
What is the passing score for the NRSB RRS exam?
NRSB’s current April 2026 v1.1 study guide states that 70% or better is required to pass the RRS knowledge exam.
How many questions do I need to answer correctly?
NRSB publishes a 70% threshold, but the cited current materials do not confirm a raw-count conversion method. Do not present a rounded item count as an official rule unless the Board specifies it.
Does NRSB publish an RRS pass rate?
The cited primary sources provide no official public RRS pass-rate series. Treat third-party percentages cautiously unless they identify a verifiable NRSB source and period.
Does a passing score give me a state license?
No. A passing score is an exam requirement for NRSB certification. State radon, business, electrical or plumbing requirements may apply separately.