NRSB RMS Measurement Results and Retakes
Candidates receive a preliminary RMS score, followed by a final result and detailed score letter after audit within 72 hours.
- After an unsuccessful attempt, the board requires a 14-day wait before registering again.
- The exam fee is currently listed as $120 and non-refundable; verify current terms before a retake.
On this page5 sections
NRSB’s current digital-exam information describes two result stages for the Radon Measurement Specialist (RMS) exam: a preliminary score after testing and a final result with a detailed score letter after an audit, stated within 72 hours. If the attempt is unsuccessful, the board says candidates must wait 14 days before registering again. The exam fee is $120 and says fees are non-refundable, so confirm the current terms before purchasing another attempt.
- Preliminary score
- Provided after the exam
- Final score report
- Detailed result after audit, stated within 72 hours
- Retake wait
- 14 days after failing
- Current listed exam fee
- $120; NRSB says fees are non-refundable
- Next step after failure
- Use detailed feedback and verify current registration terms
Preliminary and final results
A preliminary score is an initial indication, while the final score letter follows the board’s audit. Use the final communication for official records, employment documentation, and any application that requires proof of an exam result. A screen capture of a preliminary result may not be accepted by a state or employer. Ask the recipient which document it needs rather than assuming the formats are interchangeable.
The final result and detailed score letter follow within 72 hours. Keep the registered email and Prolydian account accessible after the test, and check filtered folders. If the stated period passes without the final communication, confirm that the contact address is correct and use NRSB’s official support channel. Include the exam date and account identifier, but do not send passwords or payment credentials in an ordinary message.
The detailed report can help a candidate understand where additional study is needed. Preserve the complete document and any explanation from NRSB. If a score category is unclear, ask the board what its terms mean. Avoid interpreting a category as an exact number of missed questions unless NRSB confirms that calculation. The published guide notes overlapping exam categories, so category counts do not necessarily translate into independent item totals.
What the 14-day retake rule means
NRSB requires a 14-day wait after an unsuccessful attempt before registering again. This is the board’s minimum stated interval; it does not guarantee that an appointment will be open on a particular day or prescribe how much study time a candidate needs. Use the interval to review the score letter, identify gaps, and make a deliberate decision about when to sit again.
The RMS exam costs $120, and exam fees are non-refundable. A failed attempt does not include a free retest. Allow for another registration charge when budgeting for a further attempt.
NRSB also says an appointment cannot be cancelled or changed within 24 hours. Review the current scheduling rule before selecting a new date, especially if you need time for training, equipment checks, or an accommodation. Do not pay for another attempt until you are satisfied that the credential is correct and that the appointment conditions work for you.
Turn feedback into a retake plan
Start by translating feedback into study questions. If a topic area was weak, identify the relevant section of the April 2026 v1.1 study guide and its primary references. If errors involved a protocol, consult the current applicable standard. If they involved client communication or ethics, practice explaining the scope and limits of an RMS measurement. Avoid rereading every page equally when the score report identifies a narrower need.
Next, practice with fresh scenarios. Repeating the same items can make answers familiar without improving transfer. Write down your reasoning and the fact that controls each decision. Track whether an error came from a knowledge gap, a missed condition, a unit issue, a calculation, or time pressure. Revisit the question after a delay to check that you can still solve it.
Include mixed-topic timed practice as the retake approaches. The exam has 100 questions and a two-hour limit, an average of 72 seconds per item. Practice balancing quick questions against complex scenarios and use any mark-and-review function only as the current exam interface allows. Review both the content and the pacing pattern; a rushed answer and an unfamiliar concept require different interventions.
If your score feedback suggests broad gaps, consider additional instruction from an NRSB-approved source. Verify training approval and current cost before enrolling. The RMS credential requires 16 hours of approved classroom training as described by the current guide, but a candidate should confirm how previously completed training applies and whether the board requires any additional documentation.
What happens after a passing result
A passing score completes the examination requirement, not necessarily the entire certification process. The April 2026 v1.1 NRSB guide lists 16 hours of approved classroom training, passing the knowledge exam, eight hours of approved continuing education per certification year, and adherence to the code of ethics. Verify the current application and documentation steps directly with NRSB.
If you need the result for a state license, contact that state’s radon program. NRSB advises candidates to confirm which exam the state accepts. A final NRSB score letter is not automatically a state license, firm registration, or permission to perform all radon-related services. Each regulator determines its own credential and application rules.
The board says the exam is valid for one year for NRSB certification. Coordinate training records and application timing with the board, and separately confirm any state deadlines. Save the final score letter, course certificate, ethics documents, and correspondence in a secure location. If an employer needs proof, ask whether it needs the board certificate or the exam score report.
Avoid unsupported claims about results
NRSB’s public materials reviewed here do not provide a verified RMS pass rate. A passing threshold of 70 percent is not a statistic about how many candidates succeed. Be cautious about claims that a specific resource predicts a result or guarantees a retake outcome. The official score letter is the authority for your attempt.
Likewise, do not rely on anecdotal result timelines from another candidate if they conflict with the board’s current process. The published expectation is a final audited result within 72 hours. Platform or administrative circumstances may vary; contact NRSB when your own result is delayed rather than generalizing from an online post.
Whether you pass or need to retest, keep the distinctions clear: preliminary indication, final exam result, NRSB certification, and state authorization are separate steps. Following the correct path helps you use the score report for its intended purpose and prevents an exam result from being mistaken for permission to practise.
Common questions
How soon do NRSB RMS results arrive?
A preliminary score is provided after the exam and a final result with detailed score letter follows after audit within 72 hours.
How long must I wait to retake NRSB RMS?
Candidates must wait 14 days after failing before registering again. Check current account availability and terms before booking.
Is the NRSB RMS retake free?
NRSB lists the current exam fee as $120 and says fees are non-refundable. The reviewed public page does not establish a free retake, so verify current terms for a new registration.
What should I do if my final score report is late?
Check the registered email and account, then contact NRSB through its official channel if the 72-hour stated period passes. Use the final audited communication for records.