FTCE Engineering and Technology 055 Passing Score and Scoring
The canonical FDOE table lists 74% for Engineering and Technology Education 6-12, updated February 2, 2026 and effective January 1, 2026.
- This is form-related maximum-percent guidance, not a guaranteed raw score.
- FDOE notes quality review can slightly increase a percentage.
- FDOE maximum-percent table
On this page9 sections
- Technology systems and impacts
- Engineering design and problem solving
- Energy, power and electrical systems
- Technology laboratory management and safety
- Standards-based technology instruction
- How to analyze a technology scenario
- A practical review cycle
- Reading the passing guidance
- Keep official rules and study advice distinct
The FDOE maximum-percent table lists 74% for Engineering and Technology Education 6-12. Treat it as current form guidance, not a guaranteed raw count. The official Section 55 outline defines the examinable scope but does not publish fixed per-domain item counts. FDOE Engineering and Technology Education 6-12 Section 55
- Multiple-choice items
- 80 listed
- Appointment time
- 150 minutes
- Maximum-percent guidance
- 74% for current forms
Technology systems and impacts
Section 55 begins with technology's nature and impacts. A technological system can be analyzed through inputs, processes, outputs and feedback. A bicycle, for example, takes rider energy and control inputs, converts them through mechanical components into motion, and uses feedback from the rider and road conditions to adjust. This systems frame works across scales, from a hand tool to a communication network. Name the boundary before classifying a feature: a sensor may be an input device inside one system, while the same sensor can be an output of a separate monitoring subsystem.
Technology solves problems, but its development reflects economic, social, ethical, cultural, political and environmental conditions. A new product can improve access or reliability while introducing cost, privacy, waste or safety concerns. Analyze impacts across the product life cycle: materials, manufacture, use, maintenance and disposal. Emerging technologies should be assessed using evidence about performance and likely consequences, not novelty alone. Biotechnology provides another example of a technology application. Distinguish the technology itself from a policy decision about its use.
Feedback is information about a system's performance that can guide a change. A thermostat measures a condition and adjusts heating; a human operator may use a dashboard reading to adjust a machine. A control loop includes a goal or set point, measurement, comparison and response. If feedback is delayed or noisy, a system can overshoot or oscillate. When evaluating a design, identify what is measured, who or what interprets it and whether the response reaches the relevant component. This avoids calling any display “feedback” without explaining its role.
Engineering design and problem solving
Engineering design translates a need into constraints, criteria, alternatives, a selected solution, a prototype and testing. Criteria describe desired performance; constraints limit what is feasible, such as cost, size, materials, safety, reliability or time. Students should identify the user and context before selecting a solution. A design that meets one objective while violating a safety or access constraint is not successful. Document assumptions and make tradeoffs visible rather than treating design as a single brainstorm followed by construction.
Data acquisition supports design decisions. Select instruments and methods that measure the feature being evaluated, use appropriate resolution, collect repeatable observations and record conditions. A load test should specify the load, specimen setup and failure or deflection measure. A survey or research method should fit the user question and sample. Separate observed data from interpretation. If a prototype fails, the result can reveal a weak assumption or failure mode; change one design feature at a time when possible to learn what mattered.
Ergonomics concerns how people interact with tools, spaces and systems. Fit, reach, visibility, force, posture and cognitive demand can affect usability and safety. Reliability asks whether a system performs consistently over time under expected conditions. Economic factors include acquisition, operation, maintenance and disposal cost. Legal and ethical issues may include standards, intellectual property, privacy, accessibility and responsibility for foreseeable harm. A design review weighs these factors together and supports decisions with evidence.
Energy, power and electrical systems
Energy technologies include steam, fluid power, electrical systems and solid or liquid fuels, as well as nuclear and solar sources. Distinguish energy from power: energy is capacity or amount transferred, while power is a rate. A system's source, conversion stages, distribution and load determine how energy reaches a useful output. Efficiency compares useful output with input under a defined boundary. Trace the full system before judging a device by one component's rating.
AC and DC circuits differ in how current varies with time and direction. Identify source, load and conductive path, then map components and connections. In simple resistive circuits, Ohm's law relates voltage, current and resistance. Kirchhoff's current law expresses conservation of charge at a node, and the loop law expresses energy balance around a closed path. Series and parallel arrangements change equivalent resistance differently. Check units and topology before calculation, and do not apply ideal resistor assumptions to every electronic device.
Power choices have economic, social and environmental effects. A source may have low operating emissions but require storage, transmission or particular materials; another may be dispatchable but create fuel or pollution costs. Compare lifecycle, reliability, location and demand. A technology's impact depends on how it is deployed. In an engineering problem, state the objective and system boundary, then weigh performance and constraints. The outline does not prescribe a single preferred energy source; it expects analysis of characteristics and impacts.
Technology laboratory management and safety
A comprehensive technology lab safety program identifies hazards, controls access, trains students, provides emergency procedures, and maintains tools, machines, materials and records. Risk depends on the task, equipment, material, user and setting. Before activity, inspect guards, work holding, cords, ventilation and protective equipment. Explain the stop procedure and demonstrate safe operation. A rule is effective only if the workspace and supervision make it practical to follow.
Select equipment for the learning objective and learner needs. A hands-on task may need an alternative or adjusted access method while preserving the intended concept. Keep tools maintained, labeled and stored so hazards are controlled and inventory is accurate. Materials require safe handling, storage and disposal. Safety data and manufacturer instructions should be available where relevant. If a machine or material is unsuitable, choose another process rather than improvise.
Fire prevention and response depend on the fuel, ignition source and surrounding materials. Keep exits and emergency equipment accessible, control ignition sources and store combustible materials appropriately. Use only the extinguisher and procedure appropriate to the fire class and trained setting; evacuate and call emergency services when required by the plan. Conduct drills and review near misses so procedures improve. A classroom article cannot replace site-specific training or applicable OSHA and school rules.
Standards-based technology instruction
Technology education combines design, systems thinking, technical skill and reflection. A project should align its task, materials, instruction and assessment with a learning objective and applicable standards. Project-based learning works when students have clear criteria, checkpoints, feedback and an opportunity to revise. Making an artifact alone does not prove the intended learning. Ask learners to document decisions and explain how test evidence shaped a design change.
Assess cognitive learning, psychomotor processes and problem solving with measures that fit each outcome. A rubric can distinguish safe process, technical accuracy, design reasoning and communication. A written quiz cannot fully show machine operation, and a finished product may conceal unsafe steps. Use observation, portfolios, explanations and performance evidence as appropriate. Provide accessible tools and accommodations while maintaining the learning target. Assessment data should guide reteaching and next steps.
Technology education can integrate science, mathematics, literacy and career readiness. For example, students can use measurement and geometry in a drawing, physics in a mechanism, and persuasive writing in a design brief. Career and technical student organizations can provide leadership and professional context, but participation should not replace instruction. Professional learning matters because tools and industries change. Maintain a plan for technical updating, pedagogy, assessment and evidence-informed improvement.
How to analyze a technology scenario
Identify the user's need, system boundary, inputs, process, outputs and feedback. List the criteria and constraints before choosing an option. Look for evidence: dimensions, measured performance, user feedback, cost or safety requirements. A plausible design still needs testing. Explain the tradeoff and what data would change your decision. This sequence keeps the response connected to the scenario rather than to a familiar tool name.
A practical review cycle
Retrieve one concept without notes, sketch or map it, apply it to a new case, then check your reasoning against the official competency outline. Record the specific error and retry later with a different example. For a calculation, show units; for a drawing, label views and dimensions; for safety, name the hazard and control; for instruction, connect assessment to the learning goal. Mixed review helps expose gaps that a topic-by-topic reread can hide.
Reading the passing guidance
The table describes the maximum percentage correct needed to reach the passing scaled score on current forms; it accounts for equating. FDOE notes additional quality-control review can slightly increase listed percentages. Item counts can vary and experimental items may appear, so multiplying 80 by 74% does not produce a guaranteed raw-score threshold. FDOE canonical maximum-percent table
Keep official rules and study advice distinct
The official outline defines content scope. Current FDOE pages control structure, scoring, registration and certification guidance. The design explanations and practice examples here are independent educational material. For real construction, electrical work, machine operation or fire response, follow current codes, manufacturer instructions, site safety plans and qualified professional direction. An exam-preparation example is not authorization to perform regulated work.
The passing scale score and a practice percentage answer different questions. The official result reports whether the test standard was met; a home set reflects its own selected items and conditions. Use a broad practice set to check knowledge, but do not promise a pass from a percentage that was not equated to the FTCE scale. The maximum-percent table offers current form guidance with a quality-review caveat, and the published item count can vary by version.
Treat the 74% listing as an upper form-related percentage in the current maximum-percent table, not a safe score target or a guaranteed number of items. The table explains test-form equating and says further quality review may slightly increase a listed value. The structure table separately warns that counts vary and experimental questions can appear. A candidate cannot know a future form's scored denominator by dividing a practice result into 80. Prepare across the competencies and aim for consistent performance on varied, original material.
A scaled score and a raw percentage are different measures. The FTCE reports a scaled passing score, while a home quiz uses its own content and difficulty. A practice score can identify trends, but it cannot be converted exactly to the official result unless the items and form have been equated. Use an error analysis: identify the competency, diagnose whether the miss came from terminology, a drawing, a circuit model, a design constraint or a safety judgment, and repeat with a new context.
The maximum-percent table is current evidence, not a permanent rule. Its update and effective dates should be stated with the 74% figure, and candidates should verify the source again if planning later. Do not call the figure the “passing score” without explaining that the scale-score threshold and form-related maximum percentage are different concepts. Direct readers to current FDOE scoring information for the official scale score and result.
A percentage from a practice set is useful only alongside the set's scope and difficulty. If it contains mostly familiar CAD terms, it says little about safety, construction or technology impacts. Tag each item to a competency and look for a pattern across domains. Use new questions after review so improvement reflects understanding rather than recall of an answer. The 74% maximum-percent entry is dated form guidance, and the official scored result remains the decision source.
State the table's update and effective dates whenever you use the 74% figure.
Common questions
Is this an official FTCE study guide?
No. This is independent study guidance. The FDOE Section 55 outline and current policy pages linked here are the official sources for scope and program rules.
Are these official FTCE questions?
No. Any questions here are newly written learning examples, not official, recalled or predictive test items.