Sitonce
Country: US
Show exams for United States Hong Kong
Sign in

FTCE Middle Grades General Science 5-9 004 Sample Questions and Explanations

Updated 9 min read
Key takeaway

These original FTCE Middle Grades General Science 5-9 questions let you practice reasoning across matter, physical science, Earth and space, life science, ecosystems, and inquiry.

  • They are study examples, not released test items or a full practice test.
  • Read each prompt, solve before checking, and note which evidence supports the answer.

How to use these questions

The questions below are original study items. They do not reproduce secure Florida Teacher Certification Examinations content, and they do not guarantee a particular item mix or score. Their purpose is to practice a method: identify what the question asks, select a relevant model, use the evidence provided, and explain why a tempting alternative fails.

Try each item without looking at its explanation. Write a short reason for your answer, including a unit or evidence clue where appropriate. Then compare your reasoning with the explanation. If you guessed correctly, record that as uncertain and revisit the concept later in a different context. A correct letter without a defensible reason is weak evidence of readiness.

The exam has 80 multiple-choice items and 150 minutes for this exam, but item counts can vary and experimental items may appear. No supplemental material is listed for this exact exam in the current structure table. These short examples are not a timed form.

Example question

A student pushes a cart to the right across a level surface. The cart moves at constant velocity. What is the net horizontal force on the cart?

  1. It points right because the cart is moving.
  2. It is zero because the cart has no acceleration.
  3. It points left because friction must be greater than the push.
  4. It equals the cart’s mass.
Answer: B. Constant velocity means velocity is not changing, so horizontal acceleration is zero. Newton’s second law connects net force to mass and acceleration; therefore the net horizontal force is zero in this model. A push and friction can both act and balance. The direction of motion does not by itself determine the direction of net force. A is a common misconception. C contradicts constant velocity because an unbalanced leftward force would cause leftward acceleration. D gives a mass quantity, not a force. Always distinguish individual forces from their vector sum.
Example question

A sealed syringe contains a fixed amount of gas. The plunger is pushed inward slowly while temperature remains approximately constant. Which change is expected in the simple gas model?

  1. Volume decreases and pressure increases.
  2. Volume increases and pressure decreases.
  3. Both volume and pressure remain fixed.
  4. The gas turns into a liquid automatically.
Answer: A. For a fixed amount of gas at approximately constant temperature, the simple Boyle relationship treats pressure and volume as inversely related. Reducing volume increases pressure. The prompt explicitly supplies the conditions that make this model useful. The gas does not automatically become a liquid; phase depends on material and conditions. Do not apply a gas relationship without checking which variables are held constant.
Example question

A map uses contour lines that are very close together on one hillside and widely spaced on another. What can the student infer?

  1. The closely spaced region has a steeper slope.
  2. The widely spaced region is necessarily higher.
  3. Each contour line shows a different rock type.
  4. The map gives the age of the hillside.
Answer: A. Contour lines join locations of equal elevation. If adjacent contours occur over a short horizontal distance, elevation changes more rapidly across that distance, indicating a steeper slope. Widely spaced contours generally indicate a gentler slope. The absolute elevation depends on the labels and contour interval; spacing alone does not establish which region is higher. Rock type and age require other map information or evidence. Check the legend and scale before extending an inference.
Example question

A diagram shows the Moon between Earth and the Sun, with its illuminated half facing away from Earth. Which phase is most consistent with the diagram?

  1. Full moon
  2. First quarter
  3. New moon
  4. Lunar eclipse
Answer: C. When the Moon lies near the direction of the Sun as viewed from Earth, the illuminated side mostly faces away from the observer and the phase appears new. A full moon occurs when Earth is between the Sun and Moon in the basic geometry, so the illuminated side faces Earth. A lunar eclipse requires Earth’s shadow to fall on the Moon, a particular alignment distinct from the regular phase sequence. The diagram concerns illumination geometry; it is not to scale.
Example question

In a simple monohybrid model, two heterozygous parents have one dominant and one recessive allele each. What fraction of offspring is expected to be homozygous recessive?

  1. 0
  2. 1/4
  3. 1/2
  4. 3/4
Answer: B. Each parent can pass either allele. The four equally likely combinations in the basic model are two heterozygotes, one homozygous dominant, and one homozygous recessive. Thus one quarter is expected to be homozygous recessive across many offspring. It is a probability, not a guarantee that exactly one of four children has the genotype. This result depends on the assumptions in the prompt, including the simple inheritance model.
Example question

In a food web, arrows lead from grass to a rabbit and from rabbit to a fox. In which direction should the arrow point?

  1. From fox to rabbit because the fox is larger.
  2. From rabbit to grass because matter is recycled.
  3. From grass to rabbit, showing the direction of energy transfer.
  4. Both directions because populations interact.
Answer: C. In this common food-web convention, arrows point from the food source toward the consumer and show energy transfer. Grass is the source consumed by the rabbit, and the rabbit can be consumed by the fox. Matter cycles through ecosystems, but that does not reverse the arrow convention in this diagram. Read the legend when one is provided because representations can vary. The arrow does not mean the grass intentionally provides energy; it represents a relationship.
Example question

A student investigates whether a lamp’s distance affects a plant’s growth. Each plant receives a different amount of water, and there is one plant at each distance. What is the main design problem?

  1. The dependent variable is not a plant.
  2. Water is a confounding condition, and replication is limited.
  3. Distance cannot be measured.
  4. The investigation must use a telescope.
Answer: B. If water differs along with lamp distance, an observed growth difference could be caused by either factor. Water is a confound. One plant per condition also provides little information about variation among individuals. A stronger design would keep water and other conditions consistent, define the growth measure, use multiple plants per condition when feasible, and repeat measurements. The dependent variable could be height, leaf number, or another defined outcome.
Example question

Two measurements of the same object are 12.1 cm and 12.2 cm. What is the best scientific response?

  1. Report whichever value supports the hypothesis.
  2. Average or compare them according to the protocol and preserve the raw readings.
  3. Delete the lower measurement.
  4. Claim the instrument is perfectly accurate.
Answer: B. Keep both raw readings and follow the stated measurement protocol. Repeated measurements can be summarized or compared, but the choice depends on the method and purpose. A small difference may reflect instrument resolution or ordinary variation. Selecting a value because it supports a hypothesis is bias. Two close readings suggest some repeatability, but they do not prove perfect accuracy because there may be a systematic offset.
Example question

A sealed transparent container with water is weighed before and after some water evaporates and condenses on its inner surface. Which result is expected if the entire sealed container is weighed each time?

  1. The total mass stays approximately the same.
  2. The mass doubles because vapor is lighter.
  3. The container loses all water mass.
  4. Mass is not conserved during phase changes.
Answer: A. Evaporation and condensation change the state and location of water inside the closed system, but the water remains within the container. The total mass of the sealed system should remain approximately the same, subject to measurement precision. If only the dish or liquid portion were weighed, a different result could occur because the system boundary changed. This question tests conservation and careful measurement rather than a chemical reaction.
Example question

A graph shows that two variables rise together in a field study, but the researchers did not manipulate either one. Which conclusion is strongest?

  1. The first variable caused the second.
  2. The variables are associated in the observations; more evidence is needed for causation.
  3. The graph proves the variables are identical.
  4. The study has no scientific value.
Answer: B. The graph supports an observed association under the study’s conditions. Without an appropriate design or additional evidence, it does not establish that one variable caused the other. A third variable could influence both, or the relationship could be indirect. Observational studies can be scientifically valuable, especially when manipulation is impossible or unethical, but conclusions should match the evidence.
Example question

A student warms one end of a metal rod and feels the other end become warmer. Which transfer process best explains energy moving through the solid rod?

  1. Conduction
  2. Convection
  3. Reflection
  4. Condensation
Answer: A. Conduction transfers thermal energy through interactions within material without bulk motion of the material as a whole. Convection involves bulk movement in a fluid. Reflection describes a wave or light interaction, and condensation is a phase change. In the rod, energy moves from the warmer region toward the cooler region. The example does not require calculating a transfer rate; that would need additional measurements and material properties.
Example question

In an undisturbed sequence of sedimentary layers, a fossil is found in a lower layer than a second fossil. What is the strongest relative-age inference?

  1. The lower layer is generally older than the upper layer.
  2. The lower fossil is necessarily a different species.
  3. Both fossils formed at exactly the same time.
  4. The upper layer must be igneous.
Answer: A. The law of superposition supports the inference that lower sedimentary layers are generally older than layers above them when the sequence has not been overturned or otherwise disturbed. This is relative dating, not an exact numerical age. Fossil identity and rock type require additional evidence. If a fault or intrusion cuts across the layers, the relationships must be interpreted with that feature in mind.

These additional examples extend the sample across thermal transfer and Earth history. They still represent only a small portion of the official competencies, so use the nine-domain outline to find gaps. When you build your own questions, avoid disguising copied items as original. Write a fresh scenario, define the model, check the answer independently, and explain why each distractor fails.

Use the explanations to build a study plan

Sort missed questions by the underlying competency rather than by question number. A force error might come from confusing motion with net force. A map error might come from skipping the contour interval. A genetics error might come from treating expected probability as certainty. An inquiry error might come from claiming cause from an observational association. Write the missing reasoning step in one sentence, then solve a new example after a delay.

Use the official FDOE outline to confirm the full scope. These examples sample only a few skills and do not stand in for a complete practice examination. Before booking, check the current official test structure, registration instructions, and any linked contractor materials.

Practice with answer choices that are plausible but differ in one important assumption. That forces you to read carefully and distinguish the correct model from familiar but mismatched facts.

Then revisit the official objective behind each item.

Do not memorize the answer letters.

Learn the reasoning behind them.

That skill transfers to new problems.

Keep a useful error log.

Common questions

Are these released FTCE questions?

No. They are original instructional examples and do not reproduce secure or released FTCE items. Their explanations teach selected concepts, not a guaranteed live-test item mix.

Do these questions make a full-length practice test?

No. They are a short sample set across selected domains, not a timed or full-length mock. Use official materials and a broader plan for complete coverage.

How do I review an incorrect answer?

Name the underlying concept, identify the reasoning step that failed, explain why the distractor was tempting, and retry a new example after a delay.