Acids, Bases, Solutions and Reaction Equilibrium (FTCE 003)
A solution is a homogeneous mixture of solute and solvent at the scale considered.
- Concentration describes the amount of solute relative to solution or solvent.
- Molarity is moles of solute per liter of solution.
- Apply that method to new examples, track the relevant conditions, and state any assumption needed to support the result.
On this page20 sections
- Solutions and concentration
- Acid and base models
- Strong and weak does not mean concentrated and dilute
- PH, pOH, and logarithms
- Buffers resist pH change
- Titration and equivalence
- Dynamic equilibrium
- Le Châtelier reasoning
- Worked example: weak acid buffer
- Worked example: equilibrium shift
- Common errors and a practice sequence
- Solubility and particle interactions
- Common-ion effect and solubility equilibrium
- Equilibrium constants and reaction direction
- Polyprotic acids and amphoteric species
- Indicators and titration curves
- Salt solutions and pH
- How to review this topic
- Additional reasoning and applications
- Apply the idea carefully
Solutions and concentration
A solution is a homogeneous mixture of solute and solvent at the scale considered. Concentration describes the amount of solute relative to solution or solvent. Molarity is moles of solute per liter of solution. When preparing a diluted solution, conserve solute amount while total volume changes. Solubility describes the maximum amount that can dissolve under specified conditions, not the speed of dissolution. Temperature, pressure for gases, solvent identity, and intermolecular interactions can all influence dissolution. Read whether a problem asks for concentration, solubility, or rate.
Acid and base models
The Arrhenius model describes acids as increasing hydrogen-ion concentration in water and bases as increasing hydroxide-ion concentration. The Brønsted-Lowry model defines acids as proton donors and bases as proton acceptors, which applies beyond aqueous hydroxide chemistry. Conjugate acid-base pairs differ by one proton. A stronger acid has a weaker conjugate base in the corresponding equilibrium model. The Lewis model broadens acid-base behavior to electron-pair acceptance and donation. Match the definition to the prompt rather than mixing the models.
Strong and weak does not mean concentrated and dilute
Strong acids and bases ionize extensively in water; weak ones ionize partially. Concentration measures amount per volume. A dilute strong acid can have lower concentration than a concentrated weak acid. Strength and concentration are different axes. For strong monoprotic acids under introductory assumptions, hydrogen-ion concentration approximates the formal acid concentration. Weak-acid calculations require an equilibrium expression and may use an approximation only when justified. Do not infer pH from the word strong alone without concentration information.
PH, pOH, and logarithms
PH is negative base-10 logarithm of hydrogen-ion activity, commonly approximated by concentration in introductory problems. A one-unit pH change corresponds to a tenfold change in hydrogen-ion concentration under that approximation. At 25 °C in dilute aqueous conditions, pH plus pOH is 14, and pOH is negative log of hydroxide concentration. Temperature and nonideal behavior can affect the relation. Preserve significant figures appropriately: decimal places in pH correspond to significant figures in concentration in common reporting conventions.
Buffers resist pH change
A buffer contains a weak acid and its conjugate base, or a weak base and conjugate acid, in useful amounts. It can consume added acid or base and reduce pH change over a range. Buffer capacity is limited; adding too much reagent overwhelms it. The Henderson-Hasselbalch relation links pH to pKa and the base-to-acid ratio for a suitable buffer system. A buffer works best near its pKa, but the exact useful range depends on the context. A mixture of strong acid and strong base is not automatically a buffer.
Titration and equivalence
In an acid-base titration, known solution reacts with an analyte until a stoichiometric equivalence condition is reached. The equivalence-point pH depends on acid and base strengths; it is not always seven. An indicator changes color over a transition range and should be selected to match the titration curve. A titration curve plots pH against titrant volume and can reveal buffering regions, equivalence behavior, and acid strength. Use balanced reaction ratios and volumes to find concentration; do not read an equivalence volume as a concentration by itself.
Dynamic equilibrium
At equilibrium, forward and reverse reaction rates are equal, so macroscopic concentrations remain constant. The reactions continue; equilibrium is dynamic. The equilibrium constant expression uses product and reactant activities or concentrations raised to stoichiometric powers, omitting pure solids and liquids in the usual expression. A large K indicates products are favored relative to reactants under the stated conditions, but it does not mean the reaction is fast. Compare Q with K to determine the direction of net change toward equilibrium.
Le Châtelier reasoning
A system at equilibrium responds to a disturbance in a way that partially counteracts it. Adding a reactant often shifts composition toward products; removing a product can do likewise. Changing pressure affects equilibria involving gases when total gas mole counts differ. A catalyst changes rates in both directions and does not shift equilibrium. Temperature is different: it changes K because heat can be treated as a reactant or product in the thermochemical equation. State the disturbance first, then reason from the balanced equation and conditions.
Worked example: weak acid buffer
A buffer contains a weak acid HA and its conjugate base A−. Adding a small amount of strong acid consumes A− to form HA; adding a small amount of strong base consumes HA to form A−. The ratio changes, but pH changes less than it would in unbuffered water if both components remain available. If one component is nearly depleted, capacity falls. This particle-level explanation makes the buffer action clear and prevents treating the buffer as a substance that locks pH at one exact value.
Worked example: equilibrium shift
For N₂(g) + 3H₂(g) ⇌ 2NH₃(g), increasing pressure by reducing volume favors the side with fewer gas moles in the standard introductory model, so product formation is favored. If a catalyst is added, equilibrium position and K stay the same, though equilibrium is reached faster. If temperature changes, the direction depends on whether forward reaction is exothermic or endothermic. Never predict a temperature shift without knowing the reaction’s heat direction.
Common errors and a practice sequence
Do not confuse strength and concentration, or assume every equivalence point is neutral. A catalyst does not change equilibrium composition. Pressure effects depend on gaseous mole counts, and pure solids do not appear in the usual K expression. Practice by writing the reaction, identifying the acid-base model or equilibrium species, setting up units, and checking whether the requested quantity is pH, concentration, or direction of shift. For logarithms, estimate the order of magnitude before calculating.
Solubility and particle interactions
Dissolution depends on interactions among solute particles, solvent particles, and the mixed state. “Like dissolves like” is a qualitative guide: polar solvents often interact favorably with ionic or polar solutes, while nonpolar solvents better accommodate nonpolar solutes. It is not a law guaranteeing complete miscibility. A saturated solution is in dynamic balance between dissolution and precipitation when undissolved solute is present. Temperature can change this balance. Explain a solubility prediction through particle interactions or given data, not only the slogan.
Common-ion effect and solubility equilibrium
Adding an ion already present in a dissolution equilibrium can shift the balance toward the undissolved solid under the common-ion effect. For a sparingly soluble ionic compound, the solubility-product expression relates dissolved ion concentrations at equilibrium. A common ion can reduce solubility, but complex formation, pH, and other reactions may alter the full outcome. Write the balanced dissolution equation and its equilibrium expression before predicting the effect. Do not insert pure solid into the usual equilibrium-constant expression.
Equilibrium constants and reaction direction
For a balanced reaction, K is built from equilibrium product concentrations over reactant concentrations, each raised to its coefficient, omitting pure solids and liquids. The reaction quotient Q uses current concentrations in the same form. If Q is less than K, the system tends toward products; if Q exceeds K, it tends toward reactants, within the reaction model. Reversing a reaction reciprocates K, and multiplying its coefficients raises K to that power. Temperature changes K; concentration and pressure disturbances change Q and composition, not K at a fixed temperature.
Polyprotic acids and amphoteric species
Some acids can donate more than one proton in successive equilibria, each with its own dissociation constant. Later proton loss is often less favorable because the species becomes more negatively charged, though actual values depend on structure and solvent. Amphoteric substances can act as acids or bases depending on partners and conditions. When a species has multiple possible proton-transfer steps, write the specific reaction being asked about. Avoid treating every acid as monoprotic or assigning a single pH from its name alone.
Indicators and titration curves
An indicator is useful when its color-transition interval overlaps the steep region of the titration curve near equivalence. A strong acid titrated by a strong base has a different curve from a weak acid titrated by a strong base. At half-equivalence for a simple weak-acid titration, pH equals pKa under the standard model. Use the curve to identify initial pH, buffer region, equivalence volume, and post-equivalence behavior. An indicator endpoint approximates equivalence; the two terms are not identical.
Salt solutions and pH
Salts can produce acidic, basic, or near-neutral solutions depending on their ions and hydrolysis. The conjugate base of a weak acid may react with water to form hydroxide; the conjugate acid of a weak base may donate a proton to water. Ions from strong acids and bases often have negligible acid-base reaction in introductory models. Analyze each ion rather than assuming every salt is neutral. Concentration and equilibrium constants determine the extent of pH change.
How to review this topic
Use the official competency outline to identify which actions are expected, then practice explaining each process in your own words. Work at least one example with units and one unfamiliar scenario. Keep a short error log that names the reasoning step you missed, such as choosing the wrong model, skipping a conversion, or overclaiming from limited evidence. Revisit the same skill later with changed values or conditions. Retrieval and explanation make it easier to transfer knowledge when the test presents a new context.
Additional reasoning and applications
Weak-acid equilibrium calculations often begin with an initial-change-equilibrium table. For HA ⇌ H⁺ + A⁻, the initial concentration of HA decreases by x while hydrogen ion and conjugate base increase by x in the simplest model. Substitute equilibrium concentrations into Ka = [H⁺][A⁻]/[HA]. If x is small relative to the initial concentration, an approximation may simplify the quadratic, but check its validity after solving. If not, solve the quadratic or use the method specified. For a weak base, write the corresponding water reaction and use Kb. At 25 °C, Ka times Kb for a conjugate pair equals Kw under the standard aqueous model. These equations show why the acid name alone does not determine pH: both equilibrium strength and starting concentration matter. For polyprotic systems or mixtures, additional equilibria may matter, and a simple one-step approximation can fail. Read the question to determine whether it expects conceptual comparison or full calculation. Keep logarithms and concentration units consistent, then check whether the pH range makes chemical sense.
Apply the idea carefully
A useful acid-base check is to estimate before calculating. Strong acid concentration near one hundredth molar should produce an acidic pH near two under the simple complete-ionization model, not a value near neutral. A basic solution should have pH above the neutral value for the stated temperature. For equilibrium shifts, write the reaction quotient and identify which concentration was perturbed. These checks do not replace calculation, but they catch powers-of-ten and direction errors. State assumptions about temperature and dilute aqueous behavior when the problem depends on them.
Common questions
How should I approach polyprotic acids and amphoteric species?
Some acids can donate more than one proton in successive equilibria, each with its own dissociation constant. Later proton loss is often less favorable because the species becomes more negatively charged, though actual values depend on structure and solvent. Amphoteric substances can act as acids or bases depending on partners and conditions. When a species has multiple possible proton-transfer steps, write the specific reaction being asked about. Avoid treating every acid as monoprotic or assigning a single pH from its name alone.
How should I approach indicators and titration curves?
An indicator is useful when its color-transition interval overlaps the steep region of the titration curve near equivalence. A strong acid titrated by a strong base has a different curve from a weak acid titrated by a strong base. At half-equivalence for a simple weak-acid titration, pH equals pKa under the standard model. Use the curve to identify initial pH, buffer region, equivalence volume, and post-equivalence behavior. An indicator endpoint approximates equivalence; the two terms are not identical.