Sitonce
Country: US
Show exams for United States Hong Kong
Sign in

FCC GROL Elements 1 and 3 Format and Timing

Updated 5 min read
Key takeaway

GROL uses two separately scored multiple-choice elements: Element 1 has 24 questions and Element 3 has 100.

  • Remote FCC Exam allows two hours per element.
  • That timing belongs to the provider’s arrangement; it is not a universal two-hour total for the 124 questions.
On this page8 sections
  1. Two examinations, two results
  2. Multiple-choice questions
  3. Provider timing
  4. What technical diagrams require
  5. Calculations under time pressure
  6. Pace a practice sitting
  7. An original format example
  8. What the format does not include

Two examinations, two results

ElementQuestionsCorrect answers to pass
1: operating rules2418
3: technical knowledge10075

Elements 1 and 3 serve different purposes. Element 1 covers basic maritime radio law and operating practice. Element 3 covers general radiotelephone technical knowledge. Their separate identities matter for preparation, timing and scoring.

Element 1 requires 18 correct answers out of 24. Element 3 requires 75 out of 100. Both thresholds equal 75 percent, but a high result on one does not compensate for a failed result on the other.

The combined count of 124 describes the workload when both are taken. It does not create one examination with one averaged score. Record practice results by element and keep the same distinction when reviewing official results.

A candidate can be technically strong yet fail the shorter rules element. Conversely, a strong rules score does not excuse technical gaps. The format rewards preparation across both.

Multiple-choice questions

The written questions use one correct selection. Read the whole stem and all options before committing. A plausible technical statement may be wrong because it answers a different quantity or ignores a condition.

Rules questions may ask for a priority, channel purpose or appropriate action. The options can differ by one detail, such as routine versus distress traffic or voice versus digital communication.

Technical questions may ask for a definition, circuit function, calculated value or interpretation of a diagram. Identifying the task first makes the answer method clearer.

The test format does not reduce preparation to recognizing an answer letter. Question ordering and option wording are poor substitutes for understanding why a relationship applies.

Provider timing

Remote FCC Exam states a two-hour allowance for each element. At that arrangement, Element 1 and Element 3 each have their own allowance despite different lengths.

For Element 3, 120 minutes divided by 100 questions gives an average of 1.2 minutes, or 72 seconds. This is a planning calculation. It is not a rule that every question deserves exactly that time.

Many recall questions can be answered quickly, preserving time for calculations and diagrams. A rigid equal-time approach can waste time on easy items and rush more involved ones.

Do not label the combined exam “two hours” without naming the provider and per-element basis. Other examination arrangements are administered by their COLEM, so timing and session structure belong to that arrangement.

What technical diagrams require

A schematic depicts connections rather than physical placement. Identify the supply, reference node, components and output point. Two resistors are parallel only when connected across the same pair of nodes.

A drawing may ask what a component does rather than demand arithmetic. A coupling capacitor, rectifier diode and transistor bias network perform different jobs. Trace the signal path to find which job is relevant.

For a fault question, separate open from short-circuit behavior. An open series path stops current; a shorted resistance can increase current through remaining components. The answer follows from topology.

Read labels and units on the diagram. A voltage measured across one component is not necessarily the supply voltage. A current in one parallel branch is not the total current.

Calculations under time pressure

Write the requested quantity, known values and equation before substituting. Convert prefixes early. For example, 20 milliamperes is 0.02 amperes; leaving it as 20 in a watt calculation creates a thousandfold error.

Use simple trends to check the result. Added series resistance lowers current at fixed voltage. Added parallel branches lower equivalent resistance. Greater capacitive reactance is inconsistent with raising frequency in the ideal capacitor model.

For decibels, identify whether the quantity is a power ratio or a voltage ratio under appropriate impedance conditions. Subtracting a 3 dB loss from a watt value is not valid arithmetic.

One brief unit or trend check is often more useful than recomputing the same expression without inspecting the assumption that caused the error.

Pace a practice sitting

Begin with fresh or shuffled questions rather than the exact sequence used in study. Familiar order can make performance look faster and stronger than it really is.

Use separate timers and score records for each element. A combined average hides Element 1 risk. Record how much time goes to recall, diagram interpretation and calculations.

If the examination interface permits returning to questions, preserve time for unresolved items and a final check. Navigation and review functions depend on the actual delivery arrangement, so do not assume a particular interface from a paper practice set.

The useful goal is to complete accurately within the booked conditions. Finishing as fast as possible offers no benefit if it increases preventable errors.

An original format example

A question asks which of two equal resistors connected in parallel has the full supply voltage across it. Both do, because each is connected across the same source nodes. The problem tests topology before arithmetic.

Change the drawing to a series connection and each equal resistor receives half the source voltage in the simple unloaded model. The same component values now require a different answer because the connections changed.

A rules example asks whether a long routine exchange should remain on channel 16 after contact. It should move to a suitable working channel. The task is identifying an appropriate procedure rather than calculating anything.

These examples illustrate the mix of reading, recognition and reasoning. Prepare for the task types, not merely the total number of questions.

What the format does not include

The ordinary GROL Elements 1 and 3 route is written. A Morse-code examination is not part of those two elements. Other commercial credentials have different requirements, so their element lists should not be imported into GROL.

Ship Radar Element 8 is a separate qualification. Taking it in the same appointment, where offered, does not make it part of the 124-question GROL pair.

The written exam also is not a practical equipment-repair assessment. Passing shows the required examination achievement; workplace competence needs the relevant practical experience and procedures.

Common questions

How many questions are there?

Element 1 has 24 and Element 3 has 100, for 124 across the pair.

Is there one combined passing score?

No. The separate thresholds are 18/24 and 75/100.

How long does Remote FCC Exam allow?

Two hours per element, under its stated arrangement.

Is Morse code required for Elements 1 and 3?

No. The ordinary GROL route uses these written elements.