Sitonce
Country: US
Show exams for United States Hong Kong
Sign in

CIH Original Questions and Answers

Updated 10 min read
Key takeaway

These original CIH practice questions illustrate how to apply exposure assessment, sampling, statistics, control selection, ventilation, and risk communication principles.

  • They are educational examples, not BGC questions, a complete practice exam, or a simulation of the official scoring process.
  • Use each rationale to identify a principle and verify technical details against current sources.
On this page10 sections
  1. How to use these original questions
  2. Question 1: Select a representative exposure assessment
  3. Question 2: Interpret a non-detect carefully
  4. Question 3: Choose a control in the hierarchy
  5. Question 4: Interpret a noisy exposure data set
  6. Question 5: Verify ventilation performance
  7. Question 6: Communicate uncertainty to management
  8. Question 7: Verify a corrective action
  9. Review the reasoning, not just the answer
  10. Use fixed-form practice responsibly

How to use these original questions

Answer each stem before reading the rationale. Identify the decision being tested, the evidence given, and any missing information. Then explain why the chosen response is appropriate and why the alternatives do not resolve the stated problem. This process helps you transfer a principle to a new workplace scenario instead of memorizing a letter.

The items below are original and were written for explanation. They are not taken from BGC’s sample questions or operational examination. BGC says its own public sample questions are intended to show question form and that their topic and difficulty do not necessarily reflect its examinations. These examples also cannot predict a candidate’s result or reproduce the official exam.

Question 1: Select a representative exposure assessment

A plant has three tasks involving solvent use. Workers report that open-container transfer occurs for about 20 minutes per shift, but existing full-shift area samples were collected on days when transfer did not occur. A manager asks whether the area data alone characterize workers’ exposure during transfer. The central issue is representativeness: the sampling plan did not include the task that may produce the relevant exposure.

A defensible next step is to review the work process, identify workers with similar exposure potential, and design a task-relevant assessment using a suitable personal or task-based method. Consider the question, duration, workers, analytical method, and variability. Do not jump directly to a new control or claim an exposure level from measurements that missed the task.

Question 2: Interpret a non-detect carefully

A laboratory report states that an analyte was not detected above the method’s reporting limit. A supervisor wants the hygienist to write that the exposure was zero. The correct response is to explain that “not detected” means the result was below the stated analytical capability under the method conditions; it does not prove absence. The reporting limit, sample quality, timing, and sampling design matter.

A useful report describes the result, method, detection or reporting limit, and the decision question. If the limit is too high to evaluate the relevant criterion, the method may not have answered the question. Communicate this limitation and determine whether a more sensitive or differently timed assessment is warranted. Do not replace a measurement limitation with a false zero.

Question 3: Choose a control in the hierarchy

A maintenance task creates repeated visible dust at a transfer point. Workers currently wear respirators, but dust still escapes into the surrounding area. The question asks for a preferred control direction. First investigate whether the material or process can be eliminated or substituted; if not, evaluate an engineering control that captures or contains the dust near its source. PPE may remain part of the program but is not automatically the first choice.

The best recommendation depends on material hazards, process design, feasibility, and potential effects on the operation. A local exhaust system may be appropriate, but its design and performance require qualified evaluation. A generic fan may spread contamination or fail to capture the source. The hygienist should recommend a control grounded in the exposure pathway and validate its performance after installation.

Question 4: Interpret a noisy exposure data set

Several exposure measurements from a group of workers span a wide range. One high value occurred during an unusual upset, while the remaining samples reflect routine production. The analyst is asked to report a single average without context. The sound response is to examine the task and process conditions, verify data quality, describe variability, and determine whether the upset belongs in the routine exposure population or requires a separate evaluation.

A mean without context can hide exposure patterns and atypical conditions. Review the sampling design, analytical uncertainty, distribution, similar exposure group definition, and work records. The decision may require both a routine characterization and a separate incident assessment. Do not discard a high value merely because it complicates the summary; explain why it is included or analyzed separately.

Question 5: Verify ventilation performance

A local exhaust hood is installed beside a task that emits vapor. Workers report that the odor remains, but odor alone does not quantify exposure or prove control failure. The hygienist should inspect the system against its design and operating criteria, review capture conditions, and assess whether the worker’s position and task create a pathway around the hood. Measurements and exposure monitoring may be needed to determine performance.

Do not conclude that a system works because its fan is running or that it fails solely because an odor is noticeable. Check airflow, capture geometry, maintenance, process conditions, and relevant exposure results. Compare performance with the design basis and applicable criteria. If the system is deficient, identify a corrective action and verify that it controls exposure under representative work.

Question 6: Communicate uncertainty to management

An assessment finds that results are below a comparison value, but the sampling covers only one shift and excludes a less frequent high-production task. Management asks for a statement that the workplace is “safe.” A professional response should report what was measured, what was not measured, the comparison used, and the limits of inference. The evidence supports a bounded conclusion, not an unlimited assurance.

Risk communication should state the decision, evidence, assumptions, uncertainties, and recommended follow-up in language the audience can use. A clear caveat is not a sign of indecision; it prevents a narrow sample from being overextended. If the omitted task could materially change the conclusion, recommend an assessment that includes it and explain why.

Question 7: Verify a corrective action

A facility changes a process enclosure after an exposure assessment. The project team reports that the enclosure has been installed and asks to close the action. Installation confirms that equipment is present, but does not show that exposure is controlled under normal work. Verify the engineering performance and assess worker exposure in representative conditions before concluding that the corrective action is effective.

Validation can include review of design and commissioning records, direct observation, measurements, maintenance criteria, and follow-up sampling. The appropriate evidence depends on the hazard and control. Define acceptance criteria before evaluation where possible. If work practices change or the enclosure is bypassed, revise the assessment and communicate the remaining risk.

Review the reasoning, not just the answer

After the set, tag each item as correct with confidence, correct by guess, or incorrect. A correct guess still identifies a review need. For a missed item, write the underlying principle and the evidence needed to support the decision. Then consult a source such as the BGC blueprint, NIOSH, OSHA, or a technical reference appropriate to the topic.

These scenarios are conceptual and do not supply every engineering or regulatory detail required for a real workplace decision. Actual sampling and control design should be performed by qualified professionals using current methods, applicable requirements, and site-specific evidence. The practice objective is to strengthen reasoning, not to replace professional review.

Use fixed-form practice responsibly

A fixed set helps candidates rehearse reading, calculation, and explanation. It does not reproduce BGC’s operational content or the statistical properties of the exam. The official examination contains scored and pilot questions, is built from the job analysis, and reports results under BGC’s scoring procedures. A percentage on this sample has no official interpretation.

Use practice alongside broad blueprint study. If you repeatedly miss one kind of decision, review the topic and test it again in a different context. Avoid memorizing these scenarios as expected questions. The important outcome is being able to explain why the assessment, control, or communication decision fits the evidence.

Example question

A full-shift area sample was collected on a day when a short high-emission task did not occur. What is the best next step?

  1. Use the area result as a complete characterization
  2. Review the task and plan a representative assessment that includes it
  3. State that the task has no exposure because it is brief
  4. Select a respirator before clarifying the exposure question
Answer: B. The existing data do not include the task of concern. Define the exposure question and sampling population, then select a representative method. A short task can still matter; its duration alone does not establish that exposure is negligible.
Example question

A report says a contaminant was not detected above the reporting limit. Which conclusion is justified?

  1. The contaminant was absent
  2. Exposure was zero
  3. The result was below the stated analytical capability under the method conditions
  4. All workers were below every applicable limit
Answer: C. A non-detect is bounded by the method and sample conditions. It does not prove absence or characterize every worker. Report the limit and assess whether the method could answer the decision question.
Example question

Visible dust escapes at a transfer point while respirators are used. Which control direction should be evaluated first?

  1. Eliminate or substitute the source if feasible, then evaluate source capture
  2. Increase respirator use without further assessment
  3. Install a general fan without checking airflow direction
  4. Assume the process is controlled because workers wear PPE
Answer: A. The hierarchy favors elimination or substitution and engineering controls when feasible. A local capture design may be suitable but requires qualified evaluation. PPE does not prove that the source is adequately controlled.
Example question

A ventilation hood is installed and its fan runs. What evidence best supports closing the corrective action?

  1. The installation invoice
  2. A worker says the odor is lower
  3. Verification of performance and representative exposure conditions
  4. A photograph of the hood
Answer: C. Presence and operation alone do not establish effective exposure control. Verify the system against its design and evaluate representative work conditions. The required evidence depends on the hazard and control.
Example question

Sampling is below a comparison value but excluded a less frequent high-production task. What should the report say?

  1. The workplace is completely safe
  2. The result supports a bounded conclusion and the unmeasured task may require follow-up
  3. The excluded task can be ignored
  4. The comparison value is automatically a guarantee of no risk
Answer: B. A conclusion should match the evidence. State the conditions sampled, the comparison used, and the limitation. If the excluded task could change the decision, recommend additional assessment.
Use the rationales to learn the decision process, not to infer an official exam score.
Review stepQuestion to askWhat it develops
Identify the decisionWhat is the stem asking me to decide?Prevents solving an unrelated problem
Check evidenceWhat do the measurements and records establish?Keeps conclusions tied to data
Name uncertaintyWhat limitation could change the result?Avoids overstating the evidence
Choose a next stepWhat assessment or control fits the issue?Connects reasoning to action
Explain alternativesWhy are other choices less suitable?Tests transfer rather than recall

Its suggested references are not exhaustive and the Board does not endorse specific preparation providers. Use the current blueprint and technical sources to guide independent study.

Common questions

Are these official CIH questions?

No. They are original educational examples and are not taken from BGC’s sample questions or operational examination. They do not reproduce official content or predict which questions a candidate will see.

Can I use my score on these questions to predict passing?

No. This fixed practice set does not reproduce BGC’s exam form, scored and pilot item mix, or scoring process. Use responses to identify concepts to review, not as a pass prediction.

Why is a non-detect not the same as zero exposure?

A non-detect means the analyte was below the method’s reporting or detection capability under the sample conditions. It does not prove absence. Interpret the result with the method limit, sampling design and decision context.

Should PPE be the first control choice?

Not automatically. Consider the hierarchy of controls and the hazard, process and feasibility. Engineering or other source controls may reduce exposure more directly. PPE can be part of a complete program but needs proper selection and management.

Can these questions replace CIH technical references?

No. They are short practice scenarios. Use the BGC blueprint and current technical sources for the underlying material, and rely on qualified industrial hygienists for real workplace assessments and controls.