Sitonce
Country: US
Show exams for United States Hong Kong
Sign in

Construction Emergency Plans: CHST Exam

Updated 10 min read
Key takeaway

OSHA 29 CFR 1926.35 sets emergency action plan requirements when another construction standard requires a plan.

  • It covers reporting, evacuation, critical operations, accountability, rescue and medical duties, and contacts.
  • Employers with ten or fewer employees may communicate the plan orally under the stated exception.
  • Keep routes and roles current as the site changes.
On this page16 sections
  1. When a plan is required
  2. Plan elements and site conditions
  3. Recognize likely emergencies
  4. Evacuation routes and accountability
  5. Critical operations and shutdown
  6. Rescue and medical duties
  7. Communication and alarm systems
  8. Training and plan review
  9. Small-employer oral communication exception
  10. Worked site example: changing exit route
  11. Worked site example: small fire near equipment
  12. Worked site example: excavation emergency
  13. Coordinate contractors and visitors
  14. Avoid common plan failures
  15. Exam reasoning
  16. Maintain readiness through feedback
Applicability
1926.35 applies when an emergency action plan is required by another standard
Plan topics
Reporting, evacuation, critical operations, accountability, rescue/medical duties and contacts
Small employers
Ten or fewer employees may communicate the plan orally under the stated exception
Review
Update when procedures or site conditions change

When a plan is required

OSHA 29 CFR 1926.35 sets requirements for emergency action plans when another construction standard requires an employer to have one. Do not claim that every construction employer must maintain a written plan regardless of the applicable rule. Identify which standard triggers the plan and follow the exact scope. The plan is an operational document, not a generic binder kept in an office.

An employer with ten or fewer employees may communicate the plan orally under the stated exception. That does not remove the need for workers to understand emergency duties. Whether written or communicated orally, the plan must fit the workplace, hazard and crew. Verify the current rule and any additional site or jurisdictional requirements.

Plan elements and site conditions

Required plan elements address emergency reporting, evacuation procedures and routes, critical operations that must continue, accounting for employees, rescue and medical duties, and responsible contacts. The plan should tell workers what to do, where to go, who is in charge and how to get help. A list of phone numbers without assigned responsibilities is incomplete.

Build the plan around actual construction phases. A site may have multiple access gates, changing floors, temporary stairs, cranes, excavations, hot work, confined spaces or remote work areas. Identify how emergency responders reach each location and what hazards they could encounter. Update routes as the project changes.

Recognize likely emergencies

Consider fire, severe weather, structural instability, trench collapse, hazardous-substance release, electrical contact, medical emergency, violence and other credible site hazards. The plan should be proportionate to the work and applicable standards. It need not predict every imaginable event, but it should address foreseeable emergencies and critical operations.

Use the hazard assessment and incident history to prioritize. A high-rise project needs reliable vertical evacuation and responder access. A remote site needs location details and communications. A trench project needs a collapse response that does not send unprotected workers into the excavation. Emergency planning connects hazard recognition with realistic action.

Evacuation routes and accountability

Routes should be marked, accessible, clear and suitable for the worksite. Identify primary and alternate exits, assembly areas, alarm signals, and procedures when a normal route is blocked. For multilevel construction, explain how workers reach a safe level and how stairs or temporary access change as the building progresses.

Accountability requires knowing who was present and who has reached the assembly point. Use a reliable method such as crew rosters, sign-in systems or assigned head counts. Assign a person to report missing workers to responders. Do not permit workers to reenter a hazardous area to search unless assigned and trained under the response plan.

Critical operations and shutdown

Some operations may need to continue or be shut down safely during an evacuation. Identify the tasks, who performs them, and the conditions under which they stop. Examples may involve securing equipment, isolating energy or maintaining a critical process, subject to the actual hazard and standard. Avoid requiring a worker to remain in danger merely to complete a shutdown.

The plan should state which role makes the decision and what trigger applies. A vague direction such as “secure the site” can create conflicting actions. Workers should know whether they should evacuate immediately or perform a specific safe shutdown step first. If the operation cannot be shut down without risk, prioritize life safety and coordinate with responders.

Rescue and medical duties

Define who calls emergency services, provides first aid within their training, guides responders, and performs specialized rescue when appropriately trained and equipped. Do not assign technical rescue to a worker who lacks competence or equipment. For fall arrest, plan for prompt retrieval of a suspended worker. For a trench collapse, prevent secondary entry and coordinate qualified rescue.

Describe emergency access points, site address and landmarks, gate control, hazards responders need to know, and the person meeting them. Keep access routes clear. If local responders need advance coordination, arrange it before work begins. A plan that assumes help can find a remote or obstructed worksite may fail when minutes matter.

Communication and alarm systems

Select alarm and communication methods workers can perceive under expected noise, distance, weather and language conditions. Explain the signal, who can activate it, and how to report an emergency. Provide an alternate method if radios or power fail. Use a common language or translated instruction that the crew understands.

Test the system. A siren unheard inside a noisy area is not effective. A radio channel shared by several contractors may be unusable unless call signs and priority rules are clear. Assign a contact for responders and give workers a way to report when their assigned route is blocked.

Training and plan review

Train workers on their roles, routes, alarms, assembly points, reporting steps and relevant hazards. New workers, subcontractors and visitors need appropriate information. A briefing should match the current phase, not rely on an outdated orientation. Practice can reveal blocked exits, confusing signals or accountability gaps.

Review the plan when it is developed, when responsibilities or procedures change, or when the plan is revised. Construction changes quickly: stairs move, access gates close, work shifts to another floor and temporary hazards appear. Make sure workers know what changed. A plan update that never reaches the crew has not changed readiness.

Small-employer oral communication exception

For employers with ten or fewer employees, 1926.35 permits communicating the plan orally. The exception concerns written form; it does not make emergency duties optional. Workers still need to understand how to report an emergency, where to evacuate, how accountability works, who performs rescue or medical duties, and which contacts matter.

A spoken plan should still be organized and consistent. Assign clear roles, explain routes and assembly points, and confirm understanding. The employer may keep supporting notes as a practical matter, but do not misstate them as universally required by the rule. Site owners, other standards or local requirements may impose additional obligations.

Worked site example: changing exit route

A crew is working on an upper floor when a temporary stair is closed for material delivery. The existing plan names that stair as the only route. Stop work in the affected area until a safe alternate route is established and communicated. Update the route signs and briefing, control access to the closed stair, and verify workers can reach the assembly area.

A supervisor’s verbal reminder is not enough if the substitute route is blocked or unclear. Check lighting, access, travel path and who will account for the crew. Tell emergency responders which gate and route remain available. Reassess when material delivery ends and the stair reopens. The case tests plan maintenance as site conditions change.

Worked site example: small fire near equipment

A small fire starts near a generator. The plan should identify how to alarm, who calls responders, whether trained personnel may use an extinguisher, how workers evacuate, and how accountability occurs. Workers should not remain near an expanding fire to protect equipment. Shutdown duties must be safe, specific and assigned.

After evacuation, account for workers and tell responders about fuel, electrical sources and access. Do not reenter until authorized. Later, review whether the alarm was heard, access was clear, equipment was maintained and workers understood the route. Even if no injury occurs, the event can reveal a need to correct fuel storage or site layout.

Worked site example: excavation emergency

If a worker becomes trapped after a trench wall moves, trigger the response plan, keep others away, notify emergency services and give the competent person or responders current information. Do not send unprotected coworkers into the trench. Identify the protective system, trench depth, soil conditions, utilities, equipment location and any atmospheric hazards for responders.

The plan should name who controls traffic and access, who meets responders, and how the rest of the crew is accounted for. Rescue resources should be identified before the event. The exact response depends on training and local capabilities; this example does not prescribe technical rescue methods for unqualified workers.

Coordinate contractors and visitors

Multiple employers share construction sites. Make sure each employer’s workers understand site alarms, routes, assembly areas and how to report emergencies. Coordinate duties so one contractor’s evacuation does not conflict with another’s shutdown procedure. Visitors should receive concise instructions and an escort or a reliable way to follow the route.

Identify who has authority to issue site-wide alerts and who updates contact information. If a contractor moves a barrier or closes a route, require communication to the affected crews. Emergency responsibilities should be clear across shifts and language groups. A plan can fail even when each employer has a document if they are not coordinated.

Avoid common plan failures

Common failures include outdated routes, untested alarms, no head-count responsibility, incomplete responder directions, vague shutdown assignments and rescue roles beyond worker training. Another failure is relying on a generic corporate plan that does not show the current site entrance or floor access. Review the plan from the worker’s location and ask whether each instruction can be followed under stress.

Do not add detailed actions that create risk. For example, an instruction to secure equipment should not delay evacuation when there is imminent danger. The plan needs a clear priority and trigger. Check the applicable standard, site risk and responder advice when choosing the details.

Exam reasoning

If asked whether a written plan is required, look for the triggering standard and the small-employer exception. If asked what belongs in the plan, identify routes, reporting, accountability, critical operations, rescue or medical duties and contacts. If asked for the immediate response, protect life, raise the alarm, evacuate or isolate hazards as the situation requires, and avoid unqualified rescue.

A distractor may state that every site needs a written plan regardless of context, or that an oral plan means no training is needed. Both are overbroad. Another may say to wait for the final investigation before updating routes. The best answer reflects the current condition and communicates a safe, specific action.

Maintain readiness through feedback

After drills or real events, collect feedback from workers, supervisors and responders. Record blocked routes, alarm failures, accountability delays and confusing roles. Correct the condition and test again. A drill should be announced or conducted in a way that does not create new hazards; align it with site procedures and communicate its scope.

Review near misses involving emergency access, medical response or evacuation. If workers did not know where to assemble, examine orientation and signage. If responders could not enter, address gate control and directions. Close findings only after a practical verification, not merely after distributing a revised document.

Question 1

A construction site closes the stair named as its only evacuation route. What is the best action?

  1. Continue work and tell workers to use judgment
  2. Establish and communicate a safe alternate route and verify it before affected work continues
  3. Wait for an emergency to test the route
  4. Remove route signs
Answer: B. The plan must reflect current conditions. Workers need a usable, communicated route before continuing work in the affected area.
Question 2

A site has ten or fewer employees. What does the 1926.35 exception allow?

  1. No emergency instructions
  2. Oral communication of the plan, while emergency duties still need to be understood
  3. No assembly point
  4. Untrained rescue entry
Answer: B. The exception concerns communicating the plan orally; it does not remove the need for workers to understand emergency actions.

Common questions

Does every construction employer need a written plan under 1926.35?

The rule applies when an emergency action plan is required by another standard; it is not a universal written-plan rule for every employer.

Can a small employer communicate its plan orally?

Employers with ten or fewer employees may communicate the plan orally under the stated exception.

What should the plan cover?

Emergency reporting, evacuation, critical operations, employee accountability, rescue and medical duties, and responsible contacts.