CHST Exam Sample Questions and Answers
These original CHST-style questions practise rule matching and safety reasoning across construction hazards, emergency response and investigations.
- They are not official BCSP questions and do not predict an exam score.
- Read the activity and conditions, select the applicable principle, then explain why each distractor fails before checking the worked answer.
On this page10 sections
- Question 1: unprotected walking surface
- Question 2: trench access or cave-in protection?
- Question 3: cave-in protection below five feet
- Question 4: choose a control for overlapping trades
- Question 5: investigate a near miss
- Question 6: emergency action plan scope
- How should I review the explanations?
- A repeatable problem-solving sequence
- Additional worked application
- Decision practice and review
- Question source
- Original educational scenarios, not BCSP exam items
- Topics
- Fall protection, excavation, controls, rigging and investigation
- Exam format
- 200 multiple choice; four hours
- Pass prediction
- These items are not scaled or predictive
Use the seven questions below to practise reading the task, identifying the governing condition and explaining the control. The scenarios are original and simplified for learning. Actual work must follow applicable OSHA standards, manufacturer instructions, competent or qualified-person decisions and site procedures.
Question 1: unprotected walking surface
A worker is on an unprotected side of a general construction walking/working surface 7 feet above a lower level. Which control is identified by OSHA’s general provision?
- No protection until 10 feet.
- Guardrail, safety net, or personal fall arrest system under the applicable provision.
- A warning sign alone.
- A hard hat only.
Reasoning: the key words are “unprotected side” and “general construction walking/working surface.” The worker is above the stated six-foot threshold. The correct choice comes from the general provision, not a remembered scaffold threshold. A real plan still needs to select and implement a system that meets the detailed criteria, worker training, anchorage and equipment requirements.
Question 2: trench access or cave-in protection?
A trench is 4.5 feet deep. The nearest safe exit is 30 feet of lateral travel away. What requirement is most directly raised?
- Provide a safe means of egress so no more than 25 feet of lateral travel is required.
- Install a ladder only if the trench is 10 feet deep.
- Treat the trench as automatically exempt from every excavation rule.
- Use a scaffold guardrail.
Worked distinction: depth is 4.5 feet, so the four-foot egress provision applies. Lateral travel is 30 feet, which exceeds the 25-foot maximum. The candidate should choose the egress correction. Do not conclude that the trench has no cave-in concern just because it is under five feet; cave-in protection is evaluated separately under 1926.652.
Question 3: cave-in protection below five feet
A 4.5-foot excavation is in soil that is not entirely stable rock. A competent person has not examined the ground. Which statement is most accurate?
- Cave-in protection is automatically unnecessary because the excavation is under five feet.
- The exception is not established; a competent-person examination must find no indication of a potential cave-in for the under-five-foot exception.
- A ladder automatically provides cave-in protection.
- Only a trench over 10 feet requires any assessment.
Reasoning: the scenario explicitly rules out the stable-rock exception and says there has been no competent-person examination. The required condition for the under-five-foot exception is therefore not met. A ladder addresses safe egress, not cave-in protection. Keeping those two questions separate prevents a common threshold error.
Question 4: choose a control for overlapping trades
A delivery path crosses the work zone of another crew, creating recurring struck-by near misses. Which response best addresses the described system condition?
- Tell each worker to be more careful and close the investigation.
- Review site layout and work sequencing, control the route, communicate changes and verify the control reduces exposure.
- Issue a generic safety poster only.
- Wait for an injury before changing the plan.
Worked reasoning: the repeated near miss is a signal to inspect the process, not just the last worker action. The blueprint includes risks from multiple trades working simultaneously and skills in hazard correction, program implementation and communication. A strong response changes the work arrangement, informs affected crews and checks that the new path is effective.
Question 5: investigate a near miss
After a suspended load swings into an unoccupied area, the immediate hazard is controlled. What is a useful next investigation step?
- Record only that one worker failed to pay attention.
- Examine rigging condition, load path, communication, work planning and supervision for contributing factors.
- Restart the lift immediately without review.
- Delete the near-miss report because nobody was hurt.
Reasoning: first control the immediate danger. Once safe, gather facts and review the system. Look at rigging, load characteristics, route, exclusion controls, signals, simultaneous work and planning. Preserve relevant information and assign corrective actions with owners and verification. A near miss can reveal a serious exposure before someone is injured.
Question 6: emergency action plan scope
A site is reviewing an emergency action plan required by an applicable OSHA standard. Which item belongs in the planning discussion?
- Evacuation procedures and routes, accounting for employees, rescue/medical duties and responsible contacts.
- Only the name of the site superintendent.
- A guarantee that no event will occur.
- A list of workers’ home addresses posted publicly.
Reasoning: emergency plans assign actions before an event. Workers need to know where to go, how accountability works, who provides rescue or medical tasks and who receives reports. A contact list should be managed appropriately and not publicly expose private information. Review the applicable rule and site plan for any exceptions.
How should I review the explanations?
For each item, name the deciding fact, rule or principle. Question 2 turns on trench depth and lateral travel. Question 3 turns on the condition for an under-five-foot cave-in exception. Question 4 points to simultaneous-trade risk and control design. Question 5 asks for a system investigation after immediate response. If you can state the rule but miss the activity, create a contrast case that changes the activity and asks which provision now applies.
Study the distractors. Some are incorrect because they use the wrong threshold, confuse two separate rules, rely only on worker behavior or ignore site systems. A distractor may sound generally safe but still fail to answer the question. For every answer, ask: Does it address the stated exposure? Does it fit the activity and conditions? Does the applicable rule require more? Who verifies that the action works?
These examples are not scaled to the CHST exam. BCSP’s reviewed materials do not publish a permanent numeric passing cutoff or the exact current scored/pretest split. Use them to practise reasoning, then return to the official blueprint and current regulations for broader preparation.
A repeatable problem-solving sequence
- Identify the activity and hazard described.
- Underline conditions such as height, depth, equipment, soil or simultaneous work.
- Find the relevant rule or blueprint concept and distinguish it from similar requirements.
- Choose a control that addresses the exposure and fits the stated conditions.
- Explain why the alternatives are incomplete or unsupported.
- Verify technical claims against current OSHA text and manufacturer limits.
A study question provides a numeric threshold but does not identify whether the work involves a scaffold or a general walking surface. What is the best response?
- Apply the same threshold to all activities.
- Recognize that the activity is a necessary fact and verify the applicable rule.
- Assume no protection is required.
- Use a number from a different industry standard.
Additional worked application
Worked calculation: a simplified two-leg sling shares a 2,000-pound load at a 60-degree angle above horizontal. If the legs share equally and no other effects are included, tension per leg is W divided by two times sin 60 degrees, or about 1,155 pounds. At 30 degrees above horizontal, the denominator is two times 0.5, so each leg carries 2,000 pounds. The lower angle increases tension. A real lift also requires checking hitch effects, hardware ratings, load distribution, tag information and manufacturer limits. This example is for reasoning, not a substitute for a qualified lift calculation.
Decision practice and review
When reviewing a sample set, do not only calculate the percent correct. Sort errors into knowledge, interpretation and execution. A knowledge error means the relevant requirement was unfamiliar. An interpretation error means the rule was known but the facts were misclassified. An execution error means the chosen control was not feasible or complete. Each category needs different practice. For instance, a candidate who knows the trench egress rule but misses that the trench is at least four feet has a reading issue; another who identifies the trigger but provides no safe ladder has an application gap. Write the correction and solve a new scenario with changed facts before treating the topic as learned.
Common questions
Are these official CHST exam questions?
No. They are original learning scenarios, not questions from BCSP’s exam or secure materials.
Can these questions predict my CHST score?
No. They are not scaled or equated to BCSP’s exam. Use them to practise applying rules and finding knowledge gaps.
Why does the trench example distinguish egress from cave-in protection?
They are separate OSHA requirements with different conditions. A safe exit does not by itself establish cave-in protection.
Are OSHA thresholds the same for every construction activity?
No. Requirements depend on the activity and its specific provisions. Read the current standard that applies to the scenario.