Sitonce
Country: US
Show exams for United States Hong Kong
Sign in

CHST Exam Master Guide 2026

Updated 13 min read
Key takeaway

The CHST is a BCSP construction safety certification for candidates who meet the experience requirement and pass a 200-question, four-hour multiple-choice exam.

  • This guide explains eligibility, registration, fees, the CHST5 blueprint, applied study methods, score evidence, retakes and technical safety topics.
On this page14 sections
  1. What is the CHST certification?
  2. What are the exam facts?
  3. What does the CHST blueprint cover?
  4. How do I qualify and apply?
  5. How should I prepare?
  6. What happens after a pass?
  7. How should I use the focused guides?
  8. Domain 1: identify and control construction hazards
  9. Domain 2: prepare, investigate and respond
  10. Domain 3: sustain a safety program
  11. Domain 4: lead, communicate and train
  12. Worked integrated case: crane near an excavation
  13. Worked integrated case: fall near miss
  14. Worked integrated case: trench entry
Credential owner
Board of Certified Safety Professionals (BCSP)
Eligibility
Three years construction safety experience; at least 35% technical SH&E duties
Exam
200 multiple-choice questions; 240 minutes
Blueprint
CHST5 V.2022.04.12; four domains
Single application and exam
USD 140 application + USD 300 exam
Passing cutoff
Current numeric cutoff not verified in the owner cited exam information

What is the CHST certification?

The Construction Health and Safety Technician credential is administered by the Board of Certified Safety Professionals. It recognizes technical safety, health and environmental work in construction. The CHST is a certification, not an operating license for every construction task and not a substitute for training, employer authorization or a competent person’s judgment. Candidates should understand both the written exam blueprint and the experience requirement before investing in an application.

BCSP’s current credential page sets the experience requirement at three years of construction safety experience, with at least 35 percent of the candidate’s job duties requiring technical safety, health and environment knowledge or skills. The reviewed materials list no minimum education requirement for CHST. Candidates should use BCSP’s application definitions and document their actual duties. A job title alone does not prove that the required share of technical work was performed.

What are the exam facts?

The CHST exam has 200 four-option multiple-choice questions and four hours of answering time, according to current BCSP credential information. The available owner materials reviewed do not verify how many current items are scored versus pretest items, and they do not publish a permanent numeric passing cutoff. BCSP’s older 2022 testing guidance describes beta questions as an approximate proportion, but that is not an exact current split and should not be turned into a number of items a candidate can ignore.

Correct answers count and there is no penalty for incorrect answers. Official results are available after submitting the exam. Do not interpret that as a guaranteed immediate diagnostic report or assume that candidates receive item-level answer details. Use only the score and feedback BCSP provides through its current channel.

Exam detailCurrent verified information
Questions presented200 multiple-choice
Answering time240 minutes
Scoring splitCurrent exact scored/pretest count not verified
Passing scoreNo permanent numeric cutoff verified in reviewed BCSP sources
ResultsOfficial result available after exam submission
Retake intervalWait at least six weeks before another attempt

What does the CHST blueprint cover?

The current linked blueprint is CHST5 V.2022.04.12. It groups content into four domains: Hazard and Risk Identification and Control (36.6 percent), Emergency Preparedness, Incident Investigation, and Response (19.9 percent), Safety Program Development, Implementation, and Sustainment (22.5 percent), and Leadership, Communication, and Training (21 percent). These percentages describe the published blueprint allocation, not a guaranteed exact question count on an individual form.

Hazard control includes construction exposures such as falls, excavations, electrical hazards, cranes and rigging, confined spaces, hot work, material handling, tools, noise and hazardous substances. The domain asks candidates to identify hazards and evaluate controls, not merely name them. Study the task sequence, the conditions that trigger a rule, the limits of equipment and the role of inspections.

Emergency and incident content includes preparation, response, investigation and follow-up. The distinction between immediate response and root-cause investigation matters: protecting people and controlling the scene comes first; learning from contributing system conditions comes afterward. Program-development content concerns policies, procedures, implementation, monitoring and improvement. Leadership content includes communication, worker participation, instruction and training evaluation.

CHST5 domainWeightExamples of reasoning to practise
Hazard and Risk Identification and Control36.6%Recognize a hazard, evaluate exposure and select a feasible control
Emergency Preparedness, Incident Investigation, and Response19.9%Plan roles, respond, preserve facts and investigate contributing conditions
Safety Program Development, Implementation, and Sustainment22.5%Connect policy, implementation, inspection, corrective action and review
Leadership, Communication, and Training21.0%Communicate risk, engage workers and verify understanding

How do I qualify and apply?

Begin with the BCSP CHST eligibility page and application. The reviewed current page requires three years of construction safety experience with at least 35 percent of duties requiring technical SH&E skills. Build a record of the employers, dates, projects, work responsibilities and portion of duties that meet the definition. BCSP decides whether the documentation meets its standard; the exam outline or a training course does not grant eligibility.

Applications may be submitted at any time. Eligibility review and payment are separate from buying and scheduling an examination. Once BCSP approves an application, the candidate has one year to schedule and pass the exam under current owner information. A candidate should plan study and appointment availability inside that window. The calendar of Pearson VUE appointments can vary by location and does not guarantee a particular seat.

Current BCSP fees list USD 140 for the application and USD 300 for one exam, or USD 426 for the application-and-exam combination. An exam bundle is USD 550 and the application-plus-bundle combination is USD 676. The bundle includes two attempts if the first is unsuccessful and a six-month self-assessment. All paths remain subject to authorization, purchase terms and the six-week retake interval. Compare the bundles based on your intended use rather than treating the bundle as course instruction or unrestricted exam access.

How should I prepare?

Start with the blueprint and identify tasks you can explain and apply. A candidate who has experience with excavation controls may still need review of program implementation or training evaluation. Conversely, someone who manages a safety program may need more technical work on fall protection, cranes or hazardous materials. Use a baseline set across all domains, then track errors as knowledge gaps, misread conditions, calculation errors, or failure to distinguish a required control from a preferred improvement.

Study standards through the conditions and limitations they contain. A rule for general walking and working surfaces may set a six-foot threshold, while scaffolds use a different threshold and equipment-specific protections. Excavation access and cave-in protection are separate requirements. A threshold is not a substitute for reading the activity, exception and equipment language in the current rule. Practice identifying what the scenario actually describes before reaching for a remembered number.

Use original cases rather than attempting to memorize commercial answer keys. For each case, state the hazard, the exposure, the control hierarchy, the person responsible and how the control will be verified. An answer that says “train workers” may be incomplete if an engineering or physical control is feasible. A good explanation shows why the selected control addresses the exposure and how site conditions could change the decision.

Timed practice should reflect four hours without assuming that all questions require the same time. Read for the exact task, separate facts from background, make a defensible choice and keep moving. Review uncertain items by the reason for uncertainty. If the problem is a missing regulation detail, return to the current OSHA source; if the problem is a site-level judgment, study the competent-person or qualified-person role; if the problem is pacing, practise bounded blocks.

What happens after a pass?

Passing the exam is one stage in obtaining the credential. Candidates must also satisfy BCSP’s eligibility and application requirements. BCSP describes annual renewal and a five-year recertification cycle. Current CHST information lists a USD 145 annual renewal fee and 20 recertification points per five-year cycle, including 0.5 ethics points for cycles beginning on or after July 1, 2023. Confirm the current record and deadline in your BCSP account.

Certification supports professional credibility, but it does not replace site orientation, employer procedures, legal compliance or the qualifications required for specific safety functions. A CHST may contribute technical knowledge while project management, employers, competent persons and qualified persons retain duties defined by standards and site arrangements. Use the credential within the actual authority and responsibility assigned.

How should I use the focused guides?

Use the focused guides for eligibility, registration, fees, booking, timing, scoring, difficulty, study schedules, resources, sample questions, results and the credential path. The technical guides address fall protection, excavation safety, crane and rigging, incident investigation and emergency plans. Each topic needs its own regulatory source and conditions; a master guide cannot replace the underlying OSHA provisions.

Question 1

A candidate has worked in construction for three years, but only 20% of duties involved technical safety work. Which conclusion is best?

  1. The candidate automatically qualifies because the total years match.
  2. The stated experience percentage does not meet BCSP’s current 35% requirement.
  3. Any construction employment counts as safety experience.
  4. The exam score can substitute for the experience requirement.
Answer: B. Current CHST eligibility requires three years of construction safety experience and at least 35% of duties requiring technical SH&E knowledge or skills.
Question 2

A four-foot trench needs employee access. What must a safety technician distinguish?

  1. The egress rule from the separate cave-in protection assessment.
  2. All trench rules use one universal depth threshold.
  3. A ladder removes the need to assess cave-in hazards.
  4. Only trenches over six feet require any safety measure.
Answer: A. OSHA has a four-foot egress rule, while cave-in protection uses a separate requirement with specific exceptions. One does not replace the other.
Question 3

A candidate asks how many CHST items are pretest questions in the current exam. What is supported by the reviewed current sources?

  1. Exactly 24.
  2. Exactly 20.
  3. The current exact scored/pretest split was not verified.
  4. All 200 are confirmed scored.
Answer: C. Current exact scored/pretest split was not verified. Older owner guidance gives only an approximate beta proportion and should not be stated as an exact current count.

Domain 1: identify and control construction hazards

Hazard and risk work begins by noticing the exposure before choosing equipment. A candidate should distinguish a hazard from risk, identify who can be exposed, consider severity and likelihood, and select controls in a defensible order. Removal, substitution, engineering controls, administrative controls and PPE are not interchangeable. A prompt may ask for the best immediate action, while another asks how to prevent recurrence. Match the answer to that decision and explain which facts support it.

Construction conditions change quickly. A fall edge can appear when a guardrail is removed, an excavation can change after rain, and a crane setup can become unstable after equipment moves near an outrigger. Reassess when the work sequence or conditions change. A strong technician asks who has authority to stop work, how crews report changes and how controls are checked before exposure resumes.

Domain 2: prepare, investigate and respond

Emergency preparedness, incident investigation and response account for 19.9 percent of the CHST5 blueprint. Practice separating immediate stabilization from later analysis. In an injury event, protect people, call for help, control hazards and preserve evidence where feasible. In a near miss, investigate what the event reveals about the system even when no one was hurt. OSHA encourages investigation of injuries and near misses to identify contributing causes.

A factual investigation includes a timeline, scene observations, records and interviews with workers and supervisors. Ask what changed, what safeguards were expected, whether they were available, and why the work system allowed the exposure. Avoid stopping at the final action before injury. Corrective actions should address contributing conditions, name an owner and include a check that the change works.

Domain 3: sustain a safety program

Program development and sustainment account for 22.5 percent. This domain asks how an organization turns written policy into reliable work. Consider hazard analysis, procurement, contractor coordination, inspections, training, records, corrective action and management review. A policy does little if workers lack equipment or supervisors cannot pause production to correct an exposure. Look for system causes when a hazard recurs.

Use a construction example: crews repeatedly enter an excavation before the competent person arrives. A reminder may not fix scheduling that makes inspection unavailable. A durable response could assign inspection coverage, prohibit entry until the inspection is complete, make the stop-work role explicit, and sample work across shifts. The verification step matters because issuing a revised form alone does not establish that behavior changed.

Domain 4: lead, communicate and train

Leadership, communication and training account for 21 percent. Technical controls depend on people understanding their roles and reporting changes. Practice concise briefings that state the hazard, required control, responsible person and stop condition. Worker consultation can reveal an unsafe sequence that planners did not see. Communication should be suitable for language, noise, distance and crew composition.

Training effectiveness is more than attendance. Check whether a worker can demonstrate the procedure or explain the decision point. If a signal system is misunderstood, retraining alone may not solve an equipment or radio problem. A good program checks comprehension, observes performance and changes the method when the task or workforce changes.

Worked integrated case: crane near an excavation

A lift is planned beside a trench after heavy rain. The crane is on outriggers, the trench wall shows cracking, and workers are crossing under the intended load route. A complete assessment considers ground bearing and outrigger support, excavation stability, lift radius and chart configuration, rigging ratings, the load path and the occupied fall zone. No single warning sign resolves these combined hazards.

The immediate response is to stop the lift and keep workers clear while qualified personnel assess ground and excavation conditions. Replan the crane position or support, protect the trench, establish an exclusion zone and verify the lift plan, communications and rigging before work resumes. Document why the original arrangement failed and verify later lifts use the revised controls.

Worked integrated case: fall near miss

A worker slips at an unprotected floor edge but catches a temporary rail. Stabilize the area, prevent access to the edge and inspect the barrier. Preserve the condition and interview the worker and supervisor. Ask why the rail was temporary, whether the work sequence required its removal, who controlled the opening, and what other crews knew. Do not treat the event as harmless merely because no injury occurred.

A durable action might require a planned temporary-protection method, a named person controlling removal, an alternate system during the task and a verification step before reopening the area. Then review subsequent work. This scenario links hazard control, incident investigation, communication and program sustainment, all within the blueprint.

Worked integrated case: trench entry

A four-and-a-half-foot trench has a ladder more than 25 feet from a worker, and a supervisor says the depth is below five feet. Separate the decisions. A trench at least four feet deep needs safe egress with no more than 25 feet of lateral travel. The limited cave-in exception applies only under five feet when a competent person examines the excavation and finds no potential cave-in. Neither condition proves the other.

The appropriate response is to correct egress and have the competent person evaluate cave-in protection before entry. Also check water, atmosphere, adjacent structures and loads where facts indicate them. If a near miss occurred, investigate why entry proceeded without those checks and revise access, authorization and inspection controls.

Common questions

How many questions are on the CHST exam?

Current BCSP materials list 200 multiple-choice questions and four hours of answering time. The exact current scored/pretest split was not verified in the reviewed owner sources.

What score do I need to pass the CHST exam?

The current numeric cutoff was not verified in BCSP’s reviewed materials. Do not assume a universal percentage or raw number correct.

How much does the CHST exam cost?

The fee is USD 140 for the application and USD 300 for a single exam, with combination and bundle options. Check the current fee schedule before purchase.

What experience is required for CHST?

BCSP requires three years of construction safety experience, with at least 35% of duties requiring technical safety, health and environmental knowledge or skills.