IIQE Paper 2 Syllabus and Topics
The official IIQE Paper II syllabus has four sections: insurance products; underwriting and policy wording; claims; and customer service.
- Product topics range from motor and health to property, engineering, liability and marine insurance.
- PEAK lists Paper II as the 2022 syllabus edition and recommends the 2022 Edition study notes for exams from 24 October 2022.
On this page8 sections
- Paper
- IIQE Paper II: General Insurance
- Syllabus edition
- 2022 edition
- Main sections
- Products; underwriting and wording; claims; customer service
- Questions and time
- 50 MCQs, 75 minutes
- Recommended study notes
- 2022 Edition for exams from 24 October 2022 onward, per syllabus
- Current exam handbook
- Effective 1 September 2026; governs administration
The official Paper II syllabus at a glance
PEAK lists Paper II, General Insurance, as the 2022 syllabus edition. The syllabus is organized into four broad areas. Section 1 covers insurance products. Section 2 covers underwriting and policy wording. Section 3 covers claims. Section 4 covers customer service. The examination handbook effective 1 September 2026 sets current exam arrangements, while the syllabus PDF describes the content areas. These are separate documents with separate functions.
The syllabus recommends that candidates study the 2022 Edition of the Study Notes for examinations from 24 October 2022 onward. Before using a downloaded or purchased note set, check PEAK’s current study-notes page for the Paper II edition and any corrigenda. Do not assume a new administrative handbook automatically means a new syllabus, or that an older note set is still complete just because the syllabus date remains 2022.
| Section | What it includes | Study question |
|---|---|---|
| 1. Insurance products | Motor, health, package, property and pecuniary, engineering, liability, marine | Which risk, interest and policy form are involved? |
| 2. Underwriting and policy wording | Proposal facts, hazards, underwriting steps, policy terms and cancellation | What information changes acceptance or cover? |
| 3. Claims | Validity, duties, evidence, professionals, settlement and disputes | Does the loss meet the contract, and how is it proved? |
| 4. Customer service | Standards, organizational codes, obligations and commission rebating | What response is accurate, fair and compliant? |
Section 1: insurance products
Motor insurance includes private vehicles, motorcycles and commercial vehicles. Study the difference between liability to third parties and damage to the insured vehicle. A statutory third-party requirement does not mean every motor policy covers own damage. Product extensions, excesses, driver conditions and vehicle use are controlled by the policy schedule and wording. Commercial use, modifications and driver details can matter to underwriting. For a claim, identify whether the loss concerns injury, third-party property or the insured vehicle itself.
Health insurance covers personal accident and sickness, medical insurance, the Voluntary Health Insurance Scheme (VHIS) and Guideline on Medical Insurance Business GL31. These subjects involve different benefit structures. Personal accident cover may respond to specified accidental injury, while medical cover reimburses or pays eligible treatment expenses under stated terms. VHIS is a regulated product framework; it should not be treated as a guarantee that every medical expense is payable. Study eligibility, benefits, waiting periods, exclusions, limits and the role of the policy schedule from the current official material.
Combined and package policies bring several covers together. The syllabus names household, domestic helper, travel and commercial combined policies. They can include property and liability components, but a package label does not mean every section is automatically selected. Check the schedule, sums insured, sublimits, geographic scope, insured persons, excess and exclusions. A household policy may address building contents, personal liability and other sections. A commercial package may combine property and business-related covers. The actual contract determines which apply.
Property and pecuniary insurance includes fire and extra perils, property all risks, theft, glass, money, fidelity guarantee and surety bonds. A fire policy responds to specified insured perils, subject to terms. An all-risks policy generally begins with a broader grant but remains subject to exclusions. Theft cover may require particular evidence or security conditions. Glass cover concerns a defined property interest. Money insurance and fidelity guarantee address different financial exposures, while a surety bond involves a promise tied to an obligation. Avoid grouping every financial loss under ‘property’ without identifying the contract.
Engineering insurance includes boiler explosion, machinery breakdown, contractors’ all risks and erection all risks. A machinery breakdown policy is designed for sudden physical damage to machinery under its terms, whereas an engineering project policy may address construction or erection exposures. These products can involve technical surveys, installation stages and maintenance conditions. A claim may depend on distinguishing a covered breakdown from ordinary wear, deterioration or defective design. The syllabus names these policy families; the exact cover and exclusions require the relevant wording.
Liability insurance includes employers’ liability, products liability, professional indemnity, directors’ and officers’ liability, and public liability. They are not interchangeable. Employers’ liability concerns an employer’s legal liability to employees and statutory insurance obligations. Products liability concerns injury or damage allegedly caused by a product. Professional indemnity concerns claims alleging professional error or breach of duty. Directors’ and officers’ insurance addresses certain claims against individuals in their corporate roles. Public liability commonly concerns third-party injury or property damage arising from business activities. Identify the claimant, alleged duty and insured capacity.
Marine insurance includes cargo, hull, pleasure craft and statutory third-party risks. Cargo cover concerns goods in transit; hull cover concerns the vessel; pleasure craft insurance is directed to recreational craft and can include distinct liability cover. Marine policy analysis depends on the insured interest, voyage or period, attachment and termination, cargo valuation, transit route, warranties or conditions, and exclusions. The Marine Insurance Ordinance is relevant to the statutory framework, while the policy wording determines the actual contract response.
Section 2: underwriting and policy wording
The syllabus begins with material facts and risk assessment. It distinguishes physical and moral hazards, proposal forms and methods of obtaining material facts. A physical hazard is a condition of the property or activity that may affect the chance or severity of loss. Moral hazard relates to conduct or attitude that may influence risk or claims behavior. These categories help organize underwriting information; they do not replace an insurer’s particular questions or legal duties. A material fact is one that can influence the insurer’s assessment, and the candidate should avoid reducing the concept to a short list of obvious dangers.
Underwriting procedures include quotations, proposal forms, cover notes, policies and certificates, premium and levies. Study the sequence and purpose of each document. A quotation is an offer or indication based on stated information and terms; it is not automatically proof that cover has begun. A cover note can evidence temporary cover according to its terms. A policy sets out the contract; a certificate may provide evidence of specified cover. The exact legal effect depends on its wording and context.
Policy wording includes forms and schedules, common exceptions and conditions, excesses, deductibles and franchises, warranties, conditions, representations, general, specific and market exclusions, renewals and cancellation clauses. Learn to read schedule and wording together. A policy may define a term in a way that differs from ordinary speech. An exclusion can remove a category of loss; a condition may impose a duty or stipulate how cover operates. Do not claim that every breach automatically voids the whole policy. The effect depends on the clause and applicable law.
A practical underwriting example: a shop proposal describes storage of paper goods, but an inspection shows lithium batteries stored beside a heat source. That new information may change the physical-risk assessment. The insurer could request safeguards, alter terms or decide not to accept the exposure. The intermediary should accurately pass on material information and not conceal it to preserve a quotation. This example illustrates risk assessment; it does not predict a particular insurer’s underwriting decision.
Section 3: claims
The claims syllabus begins with what makes a claim valid and what can make one invalid. A candidate should consider the policy grant, insured event, causation, insured interest, exclusions, conditions, limits and relevant legal requirements. Then consider the insured’s duties after a loss: notice, mitigation, cooperation, preservation of evidence, documentation and any consent requirement. The exact duties vary by policy, so use the wording rather than relying on a universal claims checklist.
Documentary evidence depends on the type of claim. A property claim may need proof of ownership, photographs, repair estimates and invoices. A motor claim may need incident details, third-party information, police or repair records where applicable. A business interruption claim may need accounts, sales data, payroll and records of saved costs. Claims professionals may include adjusters, surveyors, engineers, medical practitioners, loss assessors or lawyers. Their roles differ: an adjuster may investigate for the insurer, while a claimant’s loss assessor may help present a claim. Do not confuse them.
Methods of settlement may include cash indemnity, repair, replacement, reinstatement or another contractually permitted method. The amount payable may be affected by the sum insured, sublimits, average, depreciation, salvage, excess or deductible. A claim dispute may involve policy interpretation, causation, valuation, liability or a missed condition. Identify the nature of the disagreement before choosing a next step. The syllabus mentions the Insurance Complaints Bureau; check its current jurisdiction and procedures before advising on a real complaint.
A simple settlement example: a covered theft loss is assessed at HKD40,000 and the policy carries a HKD2,000 deductible. If the wording subtracts that deductible and no other limitation applies, the illustrative payment would be HKD38,000. If the insured has a sum insured that is inadequate and an average clause applies, the settlement may be lower. The facts and contract must establish whether the clause applies. A numerical answer without the wording can be misleading.
Section 4: customer service
Customer service includes why it matters, organizational policies and codes, service standards and their implementation, legal and regulatory obligations, and the legal implications of rebating commission. It should be studied as a set of professional decisions, not a generic promise to be friendly. The intermediary should understand the customer’s needs, explain cover and limitations clearly, keep accurate records, handle information responsibly, give timely updates and direct a complaint to the correct process.
Rebating commission is specifically named in the syllabus, so candidates should understand that an attractive customer offer may raise legal or regulatory issues. Do not rely on an old slogan or assume every discount is equivalent. The current governing law and IA guidance determine what is permitted. An intermediary should not promise a rebate without confirming the rules and the principal’s process. If a question presents a proposed payment or inducement, identify the source, recipient, representation and compliance context.
Organizational standards turn obligations into repeatable steps. For example, a firm may require a needs-analysis record, written confirmation of important exclusions, call notes and escalation of complaints. These internal procedures do not replace legal duties, but they can help staff meet them consistently. In an exam scenario, the most appropriate action often combines an accurate explanation to the customer with proper documentation and referral where the issue exceeds the intermediary’s authority.
How to organize the syllabus in a study map
A compact study map can use five columns: syllabus item, product or process, insured interest, key contract feature and claim example. For fire insurance, record property interest, insured peril, exclusions, sum insured and evidence of damage. For motor, record vehicle type, third-party liability, own-damage section, driver/use terms and accident evidence. For marine cargo, record goods, transit, attachment, route and proof of loss. For claims, record duty, document and possible settlement method.
This structure supports comparison. Put motor and marine liability beside public liability to see who may claim and what exposure is insured. Compare property all risks and fire cover by the breadth of the insuring clause and the exclusions that remain. Compare medical and personal accident policies by the event or expense that triggers payment. Comparison prevents a candidate from memorizing each product in isolation and then confusing them in mixed questions.
Keep administrative facts in a separate sheet. The exam handbook effective 1 September 2026 sets Paper II at 50 questions and 75 minutes with a 70% pass standard. The syllabus content edition remains 2022 according to PEAK’s current listing. This separation prevents a common version error: thinking that the 2026 handbook changed the subject content merely because it is newer.
An example that links four sections
Imagine a delivery company adds refrigerated goods to its fleet and applies for commercial motor and cargo cover. Product knowledge identifies separate vehicle and cargo exposures. Underwriting asks for routes, vehicle use, drivers, cargo values, refrigeration controls and loss history. Policy wording establishes whether the goods, transit and temperature variation are covered and which exclusions or conditions apply. If cargo spoils after a refrigeration failure, the claims process examines cause, policy trigger, notification, temperature records, invoices and salvage. Customer service requires clear explanation of what remains uncertain and what evidence is needed.
Changing one fact changes the analysis. If the goods are damaged in a collision, the cause may fit a different peril than gradual temperature change. If the driver’s use differs from the proposal, the insurer may need to consider the disclosure and policy terms. If the customer was told all cargo losses were covered, the file record and explanation may become relevant to a service complaint. This integrated case is a useful way to practise the four sections without guessing an official question allocation.
The same method works for a home policy, engineering risk or public liability scenario. At each stage, ask what the customer seeks to protect, what facts the insurer needs, what the contract says and how a claim would be evidenced. Then identify the communication or service step. Paper II’s subject breadth becomes more manageable when the candidate can follow a risk from proposal through claim.
What the syllabus does not tell you
The syllabus names topics but does not assign a guaranteed number of questions or percentage to each. It does not promise that every subheading appears in every sitting. The 50-question format does not reveal a fixed topic blueprint. Avoid spending most of your time on a guessed high-weight area. Cover all listed categories and allocate additional time according to your own practice results.
A syllabus listing is also not a substitute for current law or actual policy wording. If an article explains a legal obligation, check the current ordinance or official guidance. If a claim question depends on a clause, read that clause. The study notes are learning material and may be revised by corrigenda. Use the current PEAK listing to confirm edition and updates, and do not copy or rely on an older excerpt without checking its date.
Finally, the exam syllabus is not a licence to give case-specific advice beyond your role. A candidate may learn general rules about liability, claims or product features. An actual customer matter can turn on detailed facts, policy documents and current law. Refer complex legal questions, disputed liability and coverage decisions to the responsible insurer, claims professional or qualified adviser.