Weighted Average Cost of Capital: HKSI Paper 11
Weighted average cost of capital combines the required returns on a company’s financing sources using their relative weights.
- It is often used as a discount rate for projects with risk similar to the company’s existing operations.
- Paper 11 includes cost of capital, capital structure and investment appraisal.
On this page10 sections
WACC formula
Weighted average cost of capital, or WACC, is the combined required return on the financing used by a business. In the simplest debt-and-equity case, the formula is WACC = [E / (D + E)] × Re + [D / (D + E)] × Rd × (1 - T). E is equity value, D is debt value, Re is the cost of equity, Rd is the pre-tax cost of debt and T is the relevant tax rate when the interest tax deduction applies.
The formula is an average with financing weights, rather than an average of two percentages divided by two. A company financed mainly by equity should have a result closer to its cost of equity. A company with a larger debt proportion gives more weight to its debt cost. Both weights must refer to the same financing base and add up to 100%. If the problem includes preference shares or another financing class, a separate weighted component may be needed.
| Input | Meaning | Example assumption |
|---|---|---|
| E | Market value of ordinary equity | HKD 60 million |
| D | Market value of interest-bearing debt | HKD 40 million |
| Re | Required return on equity | 12% annually |
| Rd | Current pre-tax borrowing cost | 6% annually |
| T | Tax assumption for deductible interest | 25% |
All amounts and rates in the examples below are invented to demonstrate the calculation. The 25% tax assumption is not a statement about Hong Kong profits tax or the tax treatment of a particular company. Use the tax rate and deductibility specified in an exam problem. A real estimate needs the rules applying to the borrower and financing, together with supportable market inputs.
Worked calculation
Using the table, total financing value is HKD 100 million. Equity therefore represents 60 / 100 = 60%, and debt represents 40 / 100 = 40%. The cost of debt after the assumed interest deduction is 6% × (1 - 0.25) = 4.5%. The equity contribution is 60% × 12% = 7.2 percentage points. The debt contribution is 40% × 4.5% = 1.8 percentage points. Adding the contributions gives a WACC of 9%.
The distinction between a component cost and its contribution matters. The company does not borrow at 1.8%. Its assumed after-tax debt cost is 4.5%, but debt finances only 40% of the capital base. Similarly, 7.2% is the weighted equity contribution, not the shareholders’ required return. The required return on equity remains 12% in this example. Keeping these labels separate prevents a plausible calculation from producing the wrong answer to a differently worded question.
Without a usable interest tax deduction, the same assumed financing mix and component costs would produce 60% × 12% + 40% × 6% = 9.6%. The difference is 0.6 percentage points. It equals the debt weight multiplied by the borrowing rate and tax assumption: 40% × 6% × 25%. Do not subtract the tax rate from the final WACC or apply the deduction to the equity component. The standard adjustment in this simplified formula applies to debt interest.
Market weights and book weights
Market values are normally used when estimating the return required by current capital providers. Equity market value for a listed company is its share price multiplied by the relevant number of shares. Debt market value is the value of the borrowing claims; it is not automatically identical to their balance-sheet carrying amount. Book equity measures an accounting residual and can differ substantially from the market’s valuation of shareholders’ claims.
Suppose the same business has book equity of HKD 30 million and debt carried at HKD 40 million, while equity market value is HKD 60 million. Using the book figures gives an equity weight of 30 / 70, or about 42.86%, and a debt weight of 40 / 70, or about 57.14%. At the unchanged component costs of 12% and 4.5%, this produces about 7.71%, rather than the market-weighted 9%. The difference comes from the weights, not from a new operating forecast.
That example does not establish that book weights always reduce WACC. The direction depends on the relative book and market values and the component costs. In an exam calculation, follow the specified basis. If market values are supplied and a conventional market-weighted WACC is requested, do not substitute book equity because it is easier to find. If the question explicitly asks for book weights, use them and identify the basis of the answer.
Debt-to-equity ratios
A debt-to-equity ratio is not the same as debt’s share of total capital. A D/E ratio of 0.5 means debt is half the value of equity. Imagine equity of 100 and debt of 50: total capital is 150, so debt’s weight is 50 / 150 = one-third and equity’s weight is two-thirds. Treating the 0.5 ratio as a 50% debt weight would describe a different capital structure.
For a general debt-to-equity ratio x, the debt weight is x / (1 + x), and the equity weight is 1 / (1 + x). A D/E ratio of 2 therefore gives a debt weight of two-thirds, not 200%. Using a small imaginary balance sheet is a useful way to check the conversion. The values can be any consistent units because the financing weights depend on proportions rather than the currency scale.
Cost of equity
Equity has a cost even when a company pays no dividend. Shareholders commit money and require compensation for the risk they bear. That required return is an opportunity cost, not a mandatory interest payment shown on the income statement. Retaining earnings also does not make equity free: shareholders could otherwise receive or reinvest those funds. WACC therefore includes a cost of equity whether the business distributes its current profits or retains them.
One commonly taught model is CAPM: Re = risk-free rate + beta × equity market risk premium. For an original illustration, assume a 3% risk-free rate, a beta of 1.2 and a 5% equity market risk premium. The estimated cost of equity is 3% + 1.2 × 5% = 9%. The market risk premium is the additional expected return above the risk-free rate. If a problem instead supplies the total expected market return, subtract the risk-free rate before multiplying by beta.
These assumptions do not make 9% an observable guaranteed return. CAPM is a model, and its inputs involve estimation and consistent choices. Beta concerns systematic equity risk in that model. It should not be confused with a company’s borrowing interest rate, its accounting return on equity or a guaranteed growth rate. When a problem supplies a cost of equity directly, calculating a second estimate from unrelated data can introduce an unnecessary and unsupported assumption.
Cost of debt
The cost of debt concerns the return lenders currently require for the relevant financing risk. An old bond’s coupon is its contractual payment rate, but its current yield can differ because its market price has changed. A company may have issued debt when interest rates and credit conditions were different. Using the original coupon mechanically can therefore give a poor estimate of the current cost of borrowing.
For example, a bond may pay a 4% coupon while new borrowing of similar risk requires a 6% return. If the question identifies 6% as the relevant current cost of debt, use 6% before any stated tax adjustment. Do not select 4% simply because it is attached to the company’s existing bond. Conversely, if an exam problem explicitly defines the debt cost as a supplied coupon for a simplified calculation, follow that instruction rather than importing a market yield that is not provided.
Interest deductibility also needs care. The usual after-tax debt expression assumes the specified tax benefit can be used. A business without sufficient taxable profits, financing subject to deductibility limits or debt in a different tax jurisdiction may need a more careful treatment. For a basic exam calculation, use the stated assumptions and show the adjustment clearly. The simplified formula is not a substitute for a company-specific tax analysis.
Which cash flows use WACC?
WACC is commonly paired with operating cash flows available to both debt and equity providers, before deducting financing payments. A simplified business valuation can discount free cash flow to the firm at WACC. Cash flows available only to ordinary shareholders, after financing claims, instead need a return appropriate to equity. Mixing an equity cash-flow forecast with a combined capital-provider discount rate gives a mismatch between what is valued and the risk reflected in the rate.
Consider a one-year project requiring HKD 100 today and expected to produce HKD 110 of suitable operating cash flow at the end of the year. At a matching 9% discount rate, present value is 110 / 1.09, or about HKD 100.92. NPV is therefore approximately HKD 0.92. At 12%, present value is 110 / 1.12, or about HKD 98.21, and NPV becomes approximately negative HKD 1.79. The cash-flow forecast is unchanged; the required return changes the decision under these assumptions.
If the cash flows being discounted are before debt interest, do not subtract interest again just to reflect that the company borrows. The cost of financing is already represented in the discount-rate framework. Likewise, where the after-tax WACC already reflects the assumed interest tax benefit, adding that same financing tax benefit separately to the cash flows can double count it. Different valuation methods can handle financing effects differently, so keep the method internally consistent.
Project risk and financing changes
A company-wide WACC does not automatically fit every project. A stable existing business and a speculative expansion can have different operating risk. Applying the stable business’s discount rate to the expansion may make a risky forecast appear more attractive than an appropriate required return would. The relevant question is whether the project’s risk and financing assumptions resemble those used to estimate the corporate rate.
Changing the financing weights also requires caution. Holding all component costs fixed, increasing the weight on cheaper after-tax debt reduces the weighted average. For example, using 12% equity cost and 4.5% after-tax debt cost, an 80% equity / 20% debt mix gives 10.5%, while a 50% / 50% mix gives 8.25%. That is an arithmetic comparison under fixed assumptions. It does not prove that a real business should keep borrowing until debt dominates.
Additional leverage can increase financial risk for shareholders and lenders, changing both required returns. Refinancing risk, financial distress and contractual restrictions may also matter. A question that explicitly holds component costs constant permits the simple weight comparison; a capital-structure recommendation needs more analysis. Distinguish the calculation the assumptions support from a broader claim about the best financing mix.
Sensitivity and consistency checks
Sensitivity analysis asks how the result changes when one input changes while others remain fixed. In the original 60% equity / 40% debt example, raising the cost of equity by one percentage point raises WACC by 0.6 percentage points. Raising the pre-tax debt cost by one percentage point raises WACC by 0.4 × 0.75 = 0.3 percentage points under the 25% tax assumption. The different impacts come from weights and the assumed debt tax adjustment.
With positive financing weights that sum to one, the weighted average should lie between the included component costs. In the first example, 9% lies between 4.5% after-tax debt cost and 12% equity cost. A result outside that interval suggests checking the weights, percent conversions or tax calculation. This check concerns the included costs after any relevant adjustment, rather than comparing WACC to a pre-tax debt rate while using after-tax debt in the formula.
Rates and cash flows must also be consistent. An annual required return belongs with annual cash-flow periods unless converted appropriately. Nominal cash flows that include expected inflation need a corresponding nominal rate; real cash flows excluding inflation need a real rate. Currency and valuation date matter too. A carefully calculated financing average can still be inappropriate if its underlying assumptions do not match the forecast.
Original practice question
A simplified company has equity of HKD 80 million and debt of HKD 20 million. Cost of equity is 10%, pre-tax debt cost is 5%, and the assumed tax rate is 20% with deductible interest. What is WACC?
- 8.0%
- 8.8%
- 9.0%
- 12.0%
For Paper 11 revision, be able to explain each input as well as calculate the result. The public syllabus includes cost of capital and capital-structure concepts. In a multiple-choice item, identify whether the requested output is a component cost, financing weight, after-tax debt cost or the combined WACC. Write the weights first, apply any stated debt tax adjustment once, and check that your answer uses the same period and basis as the question.
Common questions
When is WACC a suitable project discount rate?
When project risk and financing assumptions are reasonably similar to the company’s existing operations and the cash flows are consistent with the rate.
Should debt cost be tax-adjusted?
The conventional expression uses after-tax debt cost when interest is deductible. Use the tax convention specified by the problem.
Can one corporate WACC discount every project?
No. Projects with materially different risk may require a different rate. Explain why the chosen rate fits the cash flows.